| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Issue summary: A timing side-channel which could potentially allow recovering
the private key exists in the ECDSA signature computation.
Impact summary: A timing side-channel in ECDSA signature computations
could allow recovering the private key by an attacker. However, measuring
the timing would require either local access to the signing application or
a very fast network connection with low latency.
There is a timing signal of around 300 nanoseconds when the top word of
the inverted ECDSA nonce value is zero. This can happen with significant
probability only for some of the supported elliptic curves. In particular
the NIST P-521 curve is affected. To be able to measure this leak, the attacker
process must either be located in the same physical computer or must
have a very fast network connection with low latency. For that reason
the severity of this vulnerability is Low.
The FIPS modules in 3.4, 3.3, 3.2, 3.1 and 3.0 are affected by this issue. |
| Issue summary: Calling the OpenSSL API function SSL_free_buffers may cause
memory to be accessed that was previously freed in some situations
Impact summary: A use after free can have a range of potential consequences such
as the corruption of valid data, crashes or execution of arbitrary code.
However, only applications that directly call the SSL_free_buffers function are
affected by this issue. Applications that do not call this function are not
vulnerable. Our investigations indicate that this function is rarely used by
applications.
The SSL_free_buffers function is used to free the internal OpenSSL buffer used
when processing an incoming record from the network. The call is only expected
to succeed if the buffer is not currently in use. However, two scenarios have
been identified where the buffer is freed even when still in use.
The first scenario occurs where a record header has been received from the
network and processed by OpenSSL, but the full record body has not yet arrived.
In this case calling SSL_free_buffers will succeed even though a record has only
been partially processed and the buffer is still in use.
The second scenario occurs where a full record containing application data has
been received and processed by OpenSSL but the application has only read part of
this data. Again a call to SSL_free_buffers will succeed even though the buffer
is still in use.
While these scenarios could occur accidentally during normal operation a
malicious attacker could attempt to engineer a stituation where this occurs.
We are not aware of this issue being actively exploited.
The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. |
| Issue summary: Checking excessively long DSA keys or parameters may be very
slow.
Impact summary: Applications that use the functions EVP_PKEY_param_check()
or EVP_PKEY_public_check() to check a DSA public key or DSA parameters may
experience long delays. Where the key or parameters that are being checked
have been obtained from an untrusted source this may lead to a Denial of
Service.
The functions EVP_PKEY_param_check() or EVP_PKEY_public_check() perform
various checks on DSA parameters. Some of those computations take a long time
if the modulus (`p` parameter) is too large.
Trying to use a very large modulus is slow and OpenSSL will not allow using
public keys with a modulus which is over 10,000 bits in length for signature
verification. However the key and parameter check functions do not limit
the modulus size when performing the checks.
An application that calls EVP_PKEY_param_check() or EVP_PKEY_public_check()
and supplies a key or parameters obtained from an untrusted source could be
vulnerable to a Denial of Service attack.
These functions are not called by OpenSSL itself on untrusted DSA keys so
only applications that directly call these functions may be vulnerable.
Also vulnerable are the OpenSSL pkey and pkeyparam command line applications
when using the `-check` option.
The OpenSSL SSL/TLS implementation is not affected by this issue.
The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue. |
| Issue summary: Use of the low-level GF(2^m) elliptic curve APIs with untrusted
explicit values for the field polynomial can lead to out-of-bounds memory reads
or writes.
Impact summary: Out of bound memory writes can lead to an application crash or
even a possibility of a remote code execution, however, in all the protocols
involving Elliptic Curve Cryptography that we're aware of, either only "named
curves" are supported, or, if explicit curve parameters are supported, they
specify an X9.62 encoding of binary (GF(2^m)) curves that can't represent
problematic input values. Thus the likelihood of existence of a vulnerable
application is low.
In particular, the X9.62 encoding is used for ECC keys in X.509 certificates,
so problematic inputs cannot occur in the context of processing X.509
certificates. Any problematic use-cases would have to be using an "exotic"
curve encoding.
The affected APIs include: EC_GROUP_new_curve_GF2m(), EC_GROUP_new_from_params(),
and various supporting BN_GF2m_*() functions.
Applications working with "exotic" explicit binary (GF(2^m)) curve parameters,
that make it possible to represent invalid field polynomials with a zero
constant term, via the above or similar APIs, may terminate abruptly as a
result of reading or writing outside of array bounds. Remote code execution
cannot easily be ruled out.
The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. |
| A flaw was found in glibc. When the getaddrinfo function is called with the AF_UNSPEC address family and the system is configured with no-aaaa mode via /etc/resolv.conf, a DNS response via TCP larger than 2048 bytes can potentially disclose stack contents through the function returned address data, and may cause a crash. |
| A buffer overflow was discovered in the GNU C Library's dynamic loader ld.so while processing the GLIBC_TUNABLES environment variable. This issue could allow a local attacker to use maliciously crafted GLIBC_TUNABLES environment variables when launching binaries with SUID permission to execute code with elevated privileges. |
| A flaw has been identified in glibc. In an uncommon situation, the gaih_inet function may use memory that has been freed, resulting in an application crash. This issue is only exploitable when the getaddrinfo function is called and the hosts database in /etc/nsswitch.conf is configured with SUCCESS=continue or SUCCESS=merge. |
| Issue summary: Clients using RFC7250 Raw Public Keys (RPKs) to authenticate a
server may fail to notice that the server was not authenticated, because
handshakes don't abort as expected when the SSL_VERIFY_PEER verification mode
is set.
Impact summary: TLS and DTLS connections using raw public keys may be
vulnerable to man-in-middle attacks when server authentication failure is not
detected by clients.
RPKs are disabled by default in both TLS clients and TLS servers. The issue
only arises when TLS clients explicitly enable RPK use by the server, and the
server, likewise, enables sending of an RPK instead of an X.509 certificate
chain. The affected clients are those that then rely on the handshake to
fail when the server's RPK fails to match one of the expected public keys,
by setting the verification mode to SSL_VERIFY_PEER.
Clients that enable server-side raw public keys can still find out that raw
public key verification failed by calling SSL_get_verify_result(), and those
that do, and take appropriate action, are not affected. This issue was
introduced in the initial implementation of RPK support in OpenSSL 3.2.
The FIPS modules in 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. |
| Issue summary: Some non-default TLS server configurations can cause unbounded
memory growth when processing TLSv1.3 sessions
Impact summary: An attacker may exploit certain server configurations to trigger
unbounded memory growth that would lead to a Denial of Service
This problem can occur in TLSv1.3 if the non-default SSL_OP_NO_TICKET option is
being used (but not if early_data support is also configured and the default
anti-replay protection is in use). In this case, under certain conditions, the
session cache can get into an incorrect state and it will fail to flush properly
as it fills. The session cache will continue to grow in an unbounded manner. A
malicious client could deliberately create the scenario for this failure to
force a Denial of Service. It may also happen by accident in normal operation.
This issue only affects TLS servers supporting TLSv1.3. It does not affect TLS
clients.
The FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue. OpenSSL
1.0.2 is also not affected by this issue. |
| In addition to the c_rehash shell command injection identified in CVE-2022-1292, further circumstances where the c_rehash script does not properly sanitise shell metacharacters to prevent command injection were found by code review. When the CVE-2022-1292 was fixed it was not discovered that there are other places in the script where the file names of certificates being hashed were possibly passed to a command executed through the shell. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool. Fixed in OpenSSL 3.0.4 (Affected 3.0.0,3.0.1,3.0.2,3.0.3). Fixed in OpenSSL 1.1.1p (Affected 1.1.1-1.1.1o). Fixed in OpenSSL 1.0.2zf (Affected 1.0.2-1.0.2ze). |
| An issue was discovered in drivers/usb/storage/ene_ub6250.c for the ENE UB6250 reader driver in the Linux kernel before 6.2.5. An object could potentially extend beyond the end of an allocation. |
| In the Linux kernel, pick_next_rt_entity() may return a type confused entry, not detected by the BUG_ON condition, as the confused entry will not be NULL, but list_head.The buggy error condition would lead to a type confused entry with the list head,which would then be used as a type confused sched_rt_entity,causing memory corruption. |
| An out-of-bounds (OOB) memory access flaw was found in the Linux kernel's eBPF due to an Improper Input Validation. This flaw allows a local attacker with a special privilege to crash the system or leak internal information. |
| jQuery-UI is the official jQuery user interface library. Prior to version 1.13.0, accepting the value of the `of` option of the `.position()` util from untrusted sources may execute untrusted code. The issue is fixed in jQuery UI 1.13.0. Any string value passed to the `of` option is now treated as a CSS selector. A workaround is to not accept the value of the `of` option from untrusted sources. |
| In jQuery starting with 1.12.0 and before 3.5.0, passing HTML from untrusted sources - even after sanitizing it - to one of jQuery's DOM manipulation methods (i.e. .html(), .append(), and others) may execute untrusted code. This problem is patched in jQuery 3.5.0. |
| libcurl would wrongly close the same eventfd file descriptor twice when taking
down a connection channel after having completed a threaded name resolve. |
| When asked to use a `.netrc` file for credentials **and** to follow HTTP
redirects, curl could leak the password used for the first host to the
followed-to host under certain circumstances.
This flaw only manifests itself if the netrc file has a `default` entry that
omits both login and password. A rare circumstance. |
| An issue was discovered in libexpat before 2.6.4. There is a crash within the XML_ResumeParser function because XML_StopParser can stop/suspend an unstarted parser. |
| libexpat through 2.6.1 allows an XML Entity Expansion attack when there is isolated use of external parsers (created via XML_ExternalEntityParserCreate). |
| Linux Kernel nftables Out-Of-Bounds Read/Write Vulnerability; nft_byteorder poorly handled vm register contents when CAP_NET_ADMIN is in any user or network namespace |
