Search
Search Results (19 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-13176 | 3 Debian, Netapp, Openssl | 47 Debian Linux, 500f, 500f Firmware and 44 more | 2026-11-09 | 4.6 Medium |
| Issue summary: A timing side-channel which could potentially allow recovering the private key exists in the ECDSA signature computation. Impact summary: A timing side-channel in ECDSA signature computations could allow recovering the private key by an attacker. However, measuring the timing would require either local access to the signing application or a very fast network connection with low latency. There is a timing signal of around 300 nanoseconds when the top word of the inverted ECDSA nonce value is zero. This can happen with significant probability only for some of the supported elliptic curves. In particular the NIST P-521 curve is affected. To be able to measure this leak, the attacker process must either be located in the same physical computer or must have a very fast network connection with low latency. For that reason the severity of this vulnerability is Low. The FIPS modules in 3.4, 3.3, 3.2, 3.1 and 3.0 are affected by this issue. | ||||
| CVE-2024-4741 | 4 Debian, Netapp, Openssl and 1 more | 63 Debian Linux, 500f, 500f Firmware and 60 more | 2026-11-09 | 9.8 Critical |
| Issue summary: Calling the OpenSSL API function SSL_free_buffers may cause memory to be accessed that was previously freed in some situations Impact summary: A use after free can have a range of potential consequences such as the corruption of valid data, crashes or execution of arbitrary code. However, only applications that directly call the SSL_free_buffers function are affected by this issue. Applications that do not call this function are not vulnerable. Our investigations indicate that this function is rarely used by applications. The SSL_free_buffers function is used to free the internal OpenSSL buffer used when processing an incoming record from the network. The call is only expected to succeed if the buffer is not currently in use. However, two scenarios have been identified where the buffer is freed even when still in use. The first scenario occurs where a record header has been received from the network and processed by OpenSSL, but the full record body has not yet arrived. In this case calling SSL_free_buffers will succeed even though a record has only been partially processed and the buffer is still in use. The second scenario occurs where a full record containing application data has been received and processed by OpenSSL but the application has only read part of this data. Again a call to SSL_free_buffers will succeed even though the buffer is still in use. While these scenarios could occur accidentally during normal operation a malicious attacker could attempt to engineer a stituation where this occurs. We are not aware of this issue being actively exploited. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. | ||||
| CVE-2024-4603 | 3 Netapp, Openssl, Redhat | 40 500f, 500f Firmware, 8300 and 37 more | 2026-11-09 | 5.3 Medium |
| Issue summary: Checking excessively long DSA keys or parameters may be very slow. Impact summary: Applications that use the functions EVP_PKEY_param_check() or EVP_PKEY_public_check() to check a DSA public key or DSA parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The functions EVP_PKEY_param_check() or EVP_PKEY_public_check() perform various checks on DSA parameters. Some of those computations take a long time if the modulus (`p` parameter) is too large. Trying to use a very large modulus is slow and OpenSSL will not allow using public keys with a modulus which is over 10,000 bits in length for signature verification. However the key and parameter check functions do not limit the modulus size when performing the checks. An application that calls EVP_PKEY_param_check() or EVP_PKEY_public_check() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. These functions are not called by OpenSSL itself on untrusted DSA keys so only applications that directly call these functions may be vulnerable. Also vulnerable are the OpenSSL pkey and pkeyparam command line applications when using the `-check` option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue. | ||||
| CVE-2021-3733 | 4 Fedoraproject, Netapp, Python and 1 more | 21 Extra Packages For Enterprise Linux, Fedora, Hci Compute Node Firmware and 18 more | 2026-10-14 | 6.5 Medium |
| There's a flaw in urllib's AbstractBasicAuthHandler class. An attacker who controls a malicious HTTP server that an HTTP client (such as web browser) connects to, could trigger a Regular Expression Denial of Service (ReDOS) during an authentication request with a specially crafted payload that is sent by the server to the client. The greatest threat that this flaw poses is to application availability. | ||||
| CVE-2021-41079 | 4 Apache, Debian, Netapp and 1 more | 6 Tomcat, Debian Linux, Management Services For Element Software And Netapp Hci and 3 more | 2026-10-08 | 7.5 High |
| Apache Tomcat 8.5.0 to 8.5.63, 9.0.0-M1 to 9.0.43 and 10.0.0-M1 to 10.0.2 did not properly validate incoming TLS packets. When Tomcat was configured to use NIO+OpenSSL or NIO2+OpenSSL for TLS, a specially crafted packet could be used to trigger an infinite loop resulting in a denial of service. | ||||
| CVE-2019-10219 | 3 Netapp, Oracle, Redhat | 198 Active Iq Unified Manager, Element, Management Services For Element Software And Netapp Hci and 195 more | 2026-10-08 | 6.1 Medium |
| A vulnerability was found in Hibernate-Validator. The SafeHtml validator annotation fails to properly sanitize payloads consisting of potentially malicious code in HTML comments and instructions. This vulnerability can result in an XSS attack. | ||||
| CVE-2021-37714 | 5 Jsoup, Netapp, Oracle and 2 more | 25 Jsoup, Management Services For Element Software And Netapp Hci, Banking Trade Finance and 22 more | 2026-10-08 | 7.5 High |
| jsoup is a Java library for working with HTML. Those using jsoup versions prior to 1.14.2 to parse untrusted HTML or XML may be vulnerable to DOS attacks. If the parser is run on user supplied input, an attacker may supply content that causes the parser to get stuck (loop indefinitely until cancelled), to complete more slowly than usual, or to throw an unexpected exception. This effect may support a denial of service attack. The issue is patched in version 1.14.2. There are a few available workarounds. Users may rate limit input parsing, limit the size of inputs based on system resources, and/or implement thread watchdogs to cap and timeout parse runtimes. | ||||
| CVE-2024-6119 | 3 Netapp, Openssl, Redhat | 34 500f, 500f Firmware, A250 and 31 more | 2026-07-14 | 7.5 High |
| Issue summary: Applications performing certificate name checks (e.g., TLS clients checking server certificates) may attempt to read an invalid memory address resulting in abnormal termination of the application process. Impact summary: Abnormal termination of an application can a cause a denial of service. Applications performing certificate name checks (e.g., TLS clients checking server certificates) may attempt to read an invalid memory address when comparing the expected name with an `otherName` subject alternative name of an X.509 certificate. This may result in an exception that terminates the application program. Note that basic certificate chain validation (signatures, dates, ...) is not affected, the denial of service can occur only when the application also specifies an expected DNS name, Email address or IP address. TLS servers rarely solicit client certificates, and even when they do, they generally don't perform a name check against a reference identifier (expected identity), but rather extract the presented identity after checking the certificate chain. So TLS servers are generally not affected and the severity of the issue is Moderate. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. | ||||
| CVE-2024-26458 | 3 Mit, Netapp, Redhat | 13 Kerberos 5, Active Iq Unified Manager, Cloud Volumes Ontap Mediator and 10 more | 2025-05-23 | 5.3 Medium |
| Kerberos 5 (aka krb5) 1.21.2 contains a memory leak in /krb5/src/lib/rpc/pmap_rmt.c. | ||||
| CVE-2024-26461 | 3 Mit, Netapp, Redhat | 13 Kerberos 5, Active Iq Unified Manager, Cloud Volumes Ontap Mediator and 10 more | 2025-05-23 | 7.5 High |
| Kerberos 5 (aka krb5) 1.21.2 contains a memory leak vulnerability in /krb5/src/lib/gssapi/krb5/k5sealv3.c. | ||||
| CVE-2023-2975 | 3 Netapp, Openssl, Redhat | 4 Management Services For Element Software And Netapp Hci, Ontap Select Deploy Administration Utility, Openssl and 1 more | 2025-04-23 | 5.3 Medium |
| Issue summary: The AES-SIV cipher implementation contains a bug that causes it to ignore empty associated data entries which are unauthenticated as a consequence. Impact summary: Applications that use the AES-SIV algorithm and want to authenticate empty data entries as associated data can be misled by removing, adding or reordering such empty entries as these are ignored by the OpenSSL implementation. We are currently unaware of any such applications. The AES-SIV algorithm allows for authentication of multiple associated data entries along with the encryption. To authenticate empty data the application has to call EVP_EncryptUpdate() (or EVP_CipherUpdate()) with NULL pointer as the output buffer and 0 as the input buffer length. The AES-SIV implementation in OpenSSL just returns success for such a call instead of performing the associated data authentication operation. The empty data thus will not be authenticated. As this issue does not affect non-empty associated data authentication and we expect it to be rare for an application to use empty associated data entries this is qualified as Low severity issue. | ||||
| CVE-2024-26462 | 3 Mit, Netapp, Redhat | 12 Kerberos 5, Active Iq Unified Manager, Cloud Volumes Ontap Mediator and 9 more | 2025-03-25 | 5.5 Medium |
| Kerberos 5 (aka krb5) 1.21.2 contains a memory leak vulnerability in /krb5/src/kdc/ndr.c. | ||||
| CVE-2024-39689 | 2 Certifi, Netapp | 4 Certifi, Management Services For Element Software And Netapp Hci, Ontap Select Deploy Administration Utility and 1 more | 2025-02-15 | 7.5 High |
| Certifi is a curated collection of Root Certificates for validating the trustworthiness of SSL certificates while verifying the identity of TLS hosts. Certifi starting in 2021.5.30 and prior to 2024.7.4 recognized root certificates from `GLOBALTRUST`. Certifi 2024.7.04 removes root certificates from `GLOBALTRUST` from the root store. These are in the process of being removed from Mozilla's trust store. `GLOBALTRUST`'s root certificates are being removed pursuant to an investigation which identified "long-running and unresolved compliance issues." | ||||
| CVE-2022-2048 | 5 Debian, Eclipse, Jenkins and 2 more | 12 Debian Linux, Jetty, Jenkins and 9 more | 2024-11-21 | 7.5 High |
| In Eclipse Jetty HTTP/2 server implementation, when encountering an invalid HTTP/2 request, the error handling has a bug that can wind up not properly cleaning up the active connections and associated resources. This can lead to a Denial of Service scenario where there are no enough resources left to process good requests. | ||||
| CVE-2022-2047 | 4 Debian, Eclipse, Netapp and 1 more | 9 Debian Linux, Jetty, Element Plug-in For Vcenter Server and 6 more | 2024-11-21 | 2.7 Low |
| In Eclipse Jetty versions 9.4.0 thru 9.4.46, and 10.0.0 thru 10.0.9, and 11.0.0 thru 11.0.9 versions, the parsing of the authority segment of an http scheme URI, the Jetty HttpURI class improperly detects an invalid input as a hostname. This can lead to failures in a Proxy scenario. | ||||
| CVE-2021-41099 | 6 Debian, Fedoraproject, Netapp and 3 more | 10 Debian Linux, Fedora, Management Services For Element Software And Netapp Hci and 7 more | 2024-11-21 | 7.5 High |
| Redis is an open source, in-memory database that persists on disk. An integer overflow bug in the underlying string library can be used to corrupt the heap and potentially result with denial of service or remote code execution. The vulnerability involves changing the default proto-max-bulk-len configuration parameter to a very large value and constructing specially crafted network payloads or commands. The problem is fixed in Redis versions 6.2.6, 6.0.16 and 5.0.14. An additional workaround to mitigate the problem without patching the redis-server executable is to prevent users from modifying the proto-max-bulk-len configuration parameter. This can be done using ACL to restrict unprivileged users from using the CONFIG SET command. | ||||
| CVE-2021-32765 | 3 Debian, Netapp, Redis | 3 Debian Linux, Management Services For Element Software And Netapp Hci, Hiredis | 2024-11-21 | 8.8 High |
| Hiredis is a minimalistic C client library for the Redis database. In affected versions Hiredis is vulnurable to integer overflow if provided maliciously crafted or corrupted `RESP` `mult-bulk` protocol data. When parsing `multi-bulk` (array-like) replies, hiredis fails to check if `count * sizeof(redisReply*)` can be represented in `SIZE_MAX`. If it can not, and the `calloc()` call doesn't itself make this check, it would result in a short allocation and subsequent buffer overflow. Users of hiredis who are unable to update may set the [maxelements](https://github.com/redis/hiredis#reader-max-array-elements) context option to a value small enough that no overflow is possible. | ||||
| CVE-2021-26987 | 2 Netapp, Vmware | 4 Element Plug-in For Vcenter Server, Management Services For Element Software And Netapp Hci, Solidfire \& Hci Management Node and 1 more | 2024-11-21 | 9.8 Critical |
| Element Plug-in for vCenter Server incorporates SpringBoot Framework. SpringBoot Framework versions prior to 1.3.2 are susceptible to a vulnerability which when successfully exploited could lead to Remote Code Execution. All versions of Element Plug-in for vCenter Server, Management Services versions prior to 2.17.56 and Management Node versions through 12.2 contain vulnerable versions of SpringBoot Framework. | ||||
| CVE-2021-22096 | 4 Netapp, Oracle, Redhat and 1 more | 12 Active Iq Unified Manager, Management Services For Element Software And Netapp Hci, Metrocluster Tiebreaker and 9 more | 2024-11-21 | 4.3 Medium |
| In Spring Framework versions 5.3.0 - 5.3.10, 5.2.0 - 5.2.17, and older unsupported versions, it is possible for a user to provide malicious input to cause the insertion of additional log entries. | ||||
Page 1 of 1.