Export limit exceeded: 26160 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26160 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99288 | 1 Linux | 1 Linux Kernel | 2026-11-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: inet: reject unhashed sockets during established lookups TCP established ehash lookups are lockless. The socket caches involved use SLAB_TYPESAFE_BY_RCU, so memory can be reused before an RCU reader that retained its old address has finished. After a tuple match, __inet_lookup_established() and __inet6_lookup_established() acquire a reference and repeat the tuple check. They do not check whether the new object is hashed. If the address is reused for a socket with the same tuple, the lookup can acquire a reference to the new object and return it while its nulls node is unhashed. A PoC that drives reuse with a SYN cookie request socket reproduced the crash. The new request socket is unhashed and has a NULL rsk_listener. A lookup that had loaded the address of the old request socket acquired the reference published by tcp_get_cookie_sock() and returned the new object. tcp_v4_rcv() then read sk_state through the NULL listener. The resulting crash was: BUG: kernel NULL pointer dereference, address: 0000000000000012 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page ... Oops: Oops: 0000 [#1] SMP NOPTI CPU: 4 UID: 0 PID: 0 Comm: swapper/4 Not tainted 7.3.0-00591-g0e135910deec #1 PREEMPT(lazy) ... RIP: 0010:tcp_v4_rcv+0x44e/0x1280 ... R10: 0000000000000001 R11: 00000000024ca8c0 R12: 0000000000000000 ... CR2: 0000000000000012 CR3: 0000000103d50004 CR4: 0000000000770ef0 ... Call Trace: <IRQ> ? raw_local_deliver+0xae/0x240 ip_protocol_deliver_rcu+0x2d/0x180 ip_local_deliver_finish+0x84/0x100 ip_sublist_rcv_finish+0x5f/0x70 ip_sublist_rcv+0x12a/0x1d0 ip_list_rcv+0xfd/0x130 __netif_receive_skb_list_core+0x223/0x250 netif_receive_skb_list_internal+0x1d2/0x2c0 ? try_fill_recv+0x39/0x7b0 napi_complete_done+0x74/0x170 virtnet_poll+0x445/0x600 __napi_poll+0x27/0x1e0 net_rx_action+0x2fe/0x3b0 handle_softirqs+0xc2/0x2c0 __irq_exit_rcu+0x74/0xd0 common_interrupt+0x7f/0x90 </IRQ> ... Kernel panic - not syncing: Fatal exception in interrupt After taking a reference, check whether the nulls node is unhashed in both IPv4 and IPv6 established lookups. If it is unhashed or the tuple no longer matches, drop the reference and restart the lookup. Lookups racing with the TIME_WAIT hashdance, or with a request being replaced by its child, now restart and find the new socket instead of returning the old one. Request sockets that were never inserted into ehash can have a nonzero refcount, and a stale lookup can hold a transient reference. Therefore, when SYN cookie, Fast Open, and request migration paths fail after setting a nonzero refcount, release the references held by those paths with reqsk_put() instead of freeing the request directly. | ||||
| CVE-2026-99287 | 1 Linux | 1 Linux Kernel | 2026-11-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xen-netback: Zero out sring pointers on unmap If xenvif_map_frontend_data_rings() fails when a ring is already mapped, it unmaps them via xenvif_unmap_frontend_data_rings() which keeps the ring pointers unchanged. xenvif_connect_data()'s cleanup path calls xenvif_disconnect_queue() which in turn calls xenvif_unmap_frontend_data_rings() again, which will attempt to unmap the pointers a second time. Zero out the ring pointers after they are unmapped to avoid this issue. This is XSA-532 | ||||
| CVE-2026-99286 | 1 Linux | 1 Linux Kernel | 2026-11-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xen-netback: Fix XenBus connection failure cleanup xenvif_get_stats and xenvif_get_ethtool_stats capture vif->num_queues under rcu_read_lock. We need to unpublish vif->num_queues before synchronize_net to ensure that readers that come afterwards will not read a non-zero vif->num_queues and attempt to access invalid queues. This is the same cleanup algorithm as used in backend_disconnect and added in commit b17075d5c198 ("xen-netback: fix race condition on XenBus disconnect"). This is XSA-531 | ||||
| CVE-2026-99284 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-10 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: skbuff: propagate shared-frag marker in skb_zerocopy() skb_zerocopy() moves frag descriptors from @from into @to and takes a reference on each frag, but it does not copy skb_shinfo(from)->flags into skb_shinfo(to)->flags. A destination skb holding the same page-cache backed frags as the source therefore reports skb_has_shared_frag() as false. That breaks the invariant relied on by later in-place writers. ESP input checks skb_has_shared_frag() before deciding whether an uncloned nonlinear skb can skip skb_cow_data(); with the marker lost, an skb that skb_zerocopy() built for nfnetlink_queue or for an openvswitch upcall is decrypted in place, letting an unprivileged user write into the page cache of a root-owned read-only file. Propagate SKBFL_SHARED_FRAG when frag descriptors are copied, as done for the other frag-transfer helpers. | ||||
| CVE-2026-99283 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-10 | 3.7 Low |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: tcp: use UNACK timeout for non-closing RST packets Commit be0502a3f2e9 ("netfilter: conntrack: tcp: only close if RST matches exact sequence") keeps an established conntrack entry in ESTABLISHED when an in-window RST does not match the expected sequence number exactly, so the endpoint can validate the RST with a challenge ACK. The timeout selection nevertheless uses the CLOSE timeout for every RST packet. The bug is that timeout selection is based on the packet type, not on the state transition result: even when RST validation keeps new_state in ESTABLISHED, the timeout is still forced to TCP_CONNTRACK_CLOSE. Linux TCP independently rate limits challenge ACKs per socket. A second non-exact RST can therefore arrive after the first challenge ACK has restored the timeout but before the rate limit expires. The second RST lowers the timeout to 10 seconds again while the endpoint suppresses the second challenge ACK, allowing the conntrack entry to expire while both TCP endpoints remain established. Using the ESTABLISHED timeout for such RSTs would avoid this short expiration window, but it could also retain stale entries for the five-day default because conntrack cannot reliably match the endpoint's exact TCP state. Use the UNACK timeout for RST packets that leave the conntrack entry in TCP_CONNTRACK_ESTABLISHED. Exact-match RSTs and accepted RST packet trains still fall through to timeouts[new_state], which preserves the CLOSE timeout when conntrack accepts the RST as closing the flow. This avoids the aggressive 10-second expiration window for non-exact RSTs while preserving the short timeout for RSTs that conntrack accepts as closing the flow. | ||||
| CVE-2026-99282 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_teql: fix use-after-free on lower qdisc drop The issue: teql_master_xmit() tests the slave's ndo_start_xmit() return value against NETDEV_TX_OK alone. A slave that consumes the skb but returns an error code (rc < NET_XMIT_MASK, e.g. NET_XMIT_DROP) is treated as if the skb were still owned, so the loop restores skb->dev and calls __skb_pull() on it. A VLAN slave returns the result of dev_queue_xmit() from its ndo_start_xmit() (propagated since cbbef5e18307), and when the lower qdisc drops the packet that value is NET_XMIT_DROP after the skb has been freed, giving a use-after-free in teql_master_xmit(). The Fix: test for consumption with dev_xmit_complete(), which accepts NETDEV_TX_OK and every rc < NET_XMIT_MASK, matching other callers that need to distinguish consumed results from busy. Only NETDEV_TX_OK keeps the packet counted in tx_packets/tx_bytes and advances the slave; a consumed result that is neither a success nor NET_XMIT_CN ends the attempt and is charged to tx_dropped, so lower-qdisc drops are no longer reported as good transmits. NET_XMIT_CN is counted like success because it can accompany acceptance of the current packet: pfifo_head_drop drops the old head, enqueues the current skb and returns NET_XMIT_CN. Conditions to recreate the bug: With CONFIG_NET_SCH_TEQL, CONFIG_VLAN_8021Q and CONFIG_DUMMY enabled, add lkrdummy0 (dummy) and lkrvlan0 (VLAN id 37 on lkrdummy0); set a pfifo limit 0 root on lkrdummy0 and a teql0 root on lkrvlan0; bring teql0 up with an address and send one UDP packet to it. The VLAN xmit returns NET_XMIT_DROP from the lower qdisc while holding a freed skb. | ||||
| CVE-2026-99281 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-10 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tun: Require CAP_NET_ADMIN to attach to an ownerless device Twenty years ago I made creating a tuntap device require CAP_NET_ADMIN in commit ca6bb5d7ab22 ("[NET]: Require CAP_NET_ADMIN to create tuntap devices.") The idea was to allow the permissions on /dev/net/tun to be relaxed to 0666 and thus allow owners of tun devices assigned with TUNSETOWNER to actually open it and get at their devices. What we missed at the time was that persistent devices with *no* owner were already essentially world-consumable, and anyone who could open the device node could also attach to those. Even then, using persistent devices with no explicitly set owner — on the (false) presumption that CAP_NET_ADMIN would be required to open them — wasn't an egregious userspace bug. There are cases where it does make sense to separate the creation/configuration of the netdevice, from the process which shovels packets into it. Since then, TUNSETGROUP was added a year later in commit 8c644623fe7e ("[NET]: Allow group ownership of TUN/TAP devices."). Its commit message noted that if both uid and gid are set, both have to match (in itself a bizarre choice) — but still not that with *neither* set, no permission at all was required. Then in 2012 commit c8d68e6be1c3 ("tuntap: multiqueue support") allowed new queues to be attached to a device from the moment of its creation, with no way for userspace to close the race between creation and a subsequent TUNSET{OWNER,GROUP}. In 2024, commit 3ca459eaba1bf ("tun: fix group permission check") tried to fix things to be saner: only require the user *or* the group to match, in line with standard POSIX permissions, and require CAP_NET_ADMIN if neither the user nor group authorised the access (although it put the CAP_NET_ADMIN check first, and would wrongly have reported the capability as having been used even when it was not). That fix was reverted in commit a70c7b3cbc06 ("tun: revert fix group permission check") due to allegedly causing a regression in an selinux test suite which *expected* the attachment to succeed when authorised by none of user, group, nor CAP_NET_ADMIN: https://lore.kernel.org/netdev/CAFqZXNtkCBT4f+PwyVRmQGoT3p1eVa01fCG_aNtpt6dakXncUg@mail.gmail.com/ We should not break UAPI. But we don't have to consider an selinux test case which deliberately exercises a security flaw to be UAPI worth preserving either. To which end, I have fixed it in selinux-testsuite commit b2f894f0016b ("tests/tun_tap: set an owner on the device for the relabel tests"). So: fix the lack of CAP_NET_ADMIN check on devices which *haven't* been assigned an owner or group, while leaving the weird tun ownership model as it was (user *and* group have to match, if both are set). If someone still wants to fix the latter (which wasn't actually the reason the previous attempt was reverted), they can do it under separate cover. Permit attaching to an existing device only if an owner and/or group was set and the caller matches all that were set, or if the caller has CAP_NET_ADMIN. The only behavioural change is that a device with no owner or group now requires CAP_NET_ADMIN to attach — precisely the loophole we want to close. And put the CAP_NET_ADMIN check in the right place this time. | ||||
| CVE-2026-99274 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-10 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix fiemap wild read on empty truncated response smb3_fiemap() treats -E2BIG from SMB2_ioctl() as a truncated range blob and loops for the next chunk. If the server reports STATUS_BUFFER_OVERFLOW with OutputCount == 0, SMB2_ioctl() returns -E2BIG with out_data == NULL and out_data_len == 0, and the existing length checks accept the empty result. The loop then evaluates next = out_data[num - 1].file_offset + ... with num == 0, reading 16 bytes before NULL. Reject a truncated range blob that contains no range, so the resume offset is never computed from an empty response. Also require the last range in a truncated blob to advance the resume offset without overflowing, and to stay within the requested range; a malicious or broken server could otherwise make no progress or underflow len and loop forever. Free the previous response buffer before retrying. Reproduced on 6.6.87.2 with a malicious SMB2 server that answers FSCTL_QUERY_ALLOCATED_RANGES with STATUS_BUFFER_OVERFLOW and OutputCount == 0; an FS_IOC_FIEMAP ioctl on the mount oopses in cifs_fiemap() with CR2 = fffffffffffffff8. The code path is unchanged on mainline. | ||||
| CVE-2026-99273 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-10 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: reserve space for the UTF-16 terminator in stream info smb_strtoUTF16() always writes a terminating zero UTF-16 unit after the converted characters, but get_file_stream_info() budgets only sizeof(struct smb2_file_stream_info) + streamlen * 2 for a stream entry and sizeof(struct smb2_file_stream_info) + 7 * 2 for the trailing "::$DATA" entry. When an entry exactly fills the 448-byte small response buffer, the terminator is written two bytes past the allocation. Reserve one extra UTF-16 unit in both budget checks. The terminator is not part of the wire format, so the reported lengths are unchanged. | ||||
| CVE-2026-99271 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: line6: Clear prev_fbuf on capture buffer release A KASAN slab-use-after-free read was reported in submit_audio_out_urb() when generating an impulse test signal: BUG: KASAN: slab-use-after-free in create_impulse_test_signal sound/usb/line6/playback.c:76 [inline] BUG: KASAN: slab-use-after-free in submit_audio_out_urb+0x1848/0x1b20 sound/usb/line6/playback.c:249 Read of size 2 at addr ffff888008d74870 by task syz.2.3214/7785 Allocated by task 11: kmem_cache_alloc_noprof+0x2f0/0x390 mm/slub.c:4144 line6_buffer_acquire+0x1a1/0x220 sound/usb/line6/pcm.c:158 line6_pcm_acquire+0xb6/0x230 sound/usb/line6/pcm.c:329 line6_startup_work+0x3c/0x50 sound/usb/line6/driver.c:728 Freed by task 7785: kfree+0xf8/0x390 mm/slub.c:6566 line6_buffer_release sound/usb/line6/pcm.c:176 [inline] line6_buffer_release+0xa5/0xf0 sound/usb/line6/pcm.c:170 __line6_pcm_release sound/usb/line6/pcm.c:305 [inline] line6_pcm_release+0x5a/0x80 sound/usb/line6/pcm.c:313 snd_toneport_monitor_put+0x11b/0x190 sound/usb/line6/toneport.c:183 line6pcm->prev_fbuf points into the capture PCM stream buffer (line6pcm->in.buffer), which is updated during audio_in_callback() to feed rate synchronization, software monitoring, and impulse test signal generation on playback side. When all capture streams are closed, line6_buffer_release() frees pstr->buffer with kfree(). However, it does not clear line6pcm->prev_fbuf. If playback is subsequently started (e.g. via impulse test signal volume control snd_line6_impulse_volume_put()), submit_audio_out_urb() dereferences the stale pointer line6pcm->prev_fbuf under in.lock, resulting in a slab-use-after-free read. Clear prev_fbuf and prev_fsize in line6_buffer_release() when releasing the capture stream buffer under in.lock, ensuring that no stale buffer pointer can be accessed by submit_audio_out_urb(). | ||||
| CVE-2026-99270 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-10 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Fix potential UAF in reqsk_timer_handler(). When TCP socket migration fails at inet_ehash_insert() in reqsk_timer_handler(), we jump to the no_ownership: label and free the new reqsk immediately with __reqsk_free(). Thus, we must stop the new reqsk's timer before jumping to the label, but the timer might be missed since the cited commit, resulting in UAF. As we are in the original reqsk's timer context, we can safely call timer_delete_sync() for the new reqsk. Let's pass false to __inet_csk_reqsk_queue_drop() to stop the new reqsk's timer. | ||||
| CVE-2026-99172 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-10 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: ipc: drop the mqueue mount with kern_unmount() on setup failure mq_init_ns() creates the mqueue mount with fc_mount_longterm(), so its ->mnt_ns is MNT_NS_INTERNAL. When setting up the mqueue or ipc sysctls or msg_init_ns() fails afterwards, create_ipc_ns() drops it with a plain mntput(). With ->mnt_ns set that takes the fast path of mntput_no_expire(). The count drops to zero and nothing ever kills the mount, so the mount and the mqueue superblock are leaked. Commit dc55e35f9e81 ("ipc: Store mqueue sysctls in the ipc namespace") added the first failure path after mq_init_ns() and never dropped the mount. Commit 7229d74e5e8c ("ipc: create_ipc_ns: drop mqueue mount on sysctl setup failure") tried to fix that with a mntput() but that doesn't help for a long-term mount. Use kern_unmount(). free_ipc() open-codes the same thing for a namespace that made it. | ||||
| CVE-2026-99146 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-10 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/dmc: Add sanity check for DMC load address For DMC firmware header version 3, the firmware load address is stored in dmc_info->start_mmioaddr and later used by dmc_load_program(). Unlike the MMIO address table, the firmware load address is not validated. Add a sanity check to ensure it is within the valid range. BSpec: 69671, 68378 (cherry picked from commit 5e47ee5c76ca9becde8df4ad5202845b7ffcbc4c) | ||||
| CVE-2026-99122 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-10 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: vsock/vmci: validate packet source for connected sockets vmci_transport_recv_stream_cb() looks up sockets first by the full source and destination tuple, then by destination only in the bound table. The fallback can select a non-listening socket without checking whether the packet came from its stored peer. This was reproduced with two VMCI contexts. A RST from the context not stored in a TCP_SYN_SENT socket reset that socket after it was selected by the destination-only lookup. VMCI can process notification packets in bottom-half context when the socket is not owned by user context, or defer packets to a workqueue. Use vsock_check_source() after taking the socket lock in the bottom-half path, and recheck after lock_sock() in the workqueue path. Listening sockets continue to accept packets from any source. Reply with a RST addressed from the received packet before dropping a source that fails validation. This preserves the existing reset behavior for bound non-listening and concurrently closed sockets without directing the reset to a connected socket's stored peer. | ||||
| CVE-2026-99109 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-10 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: reject SetEA requests that do not fit the request buffer CIFSSMBSetEA() copies the caller's extended attribute value into the SMB request buffer without checking that it fits. The requirement is stated in the source but was never implemented: /*BB add length check to see if it would fit in negotiated SMB buffer size BB */ /* if (ea_value_len > buffer_size - 512 (enough for header)) */ if (ea_value_len) memcpy(parm_data->list.name + name_len + 1, ea_value, ea_value_len); The only bound applied on the way in is in cifs_xattr_set(): #define MAX_EA_VALUE_SIZE CIFSMaxBufSize ... if (size > MAX_EA_VALUE_SIZE) CIFSMaxBufSize is the full payload capacity of the buffer, so a value of exactly that size leaves no room for the SMB header, the TRANS2 parameter block, the fealist header and the EA name that are written ahead of it in the same object. SendReceive() already enforces the correct limit on this very length: if (in_len > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE) but it is called after the copy has taken place. An unprivileged setxattr(2) on an SMB1 mount with a 250-byte name and a 16384-byte value writes 16384 bytes starting 345 bytes into a 16588-byte cifs_request object, ending 141 bytes past it: BUG: KASAN: slab-out-of-bounds in CIFSSMBSetEA+0xabc/0xde0 Write of size 16384 at addr ffff888003aa0159 by task init/68 __asan_memcpy+0x3c/0x60 CIFSSMBSetEA+0xabc/0xde0 cifs_xattr_set+0xd3a/0xff0 __vfs_setxattr+0x13e/0x1a0 The buggy address is located 345 bytes inside of allocated 16588-byte region Apply SendReceive()'s limit to the assembled request before the copy rather than after it, and widen the byte counters so the sum cannot wrap before it is tested. byte_count is also tested against U16_MAX, because it is stored in the 16-bit pSMB->ByteCount. That becomes reachable when CIFSMaxBufSize is raised at module load, where it may be set as high as 1024*127: with a 5-byte EA name and a 65521-byte value, count is exactly U16_MAX while byte_count is 65556, and cpu_to_le16() would truncate it to 20 and transmit a frame whose ByteCount does not match its length. Testing byte_count covers count as well, since byte_count is the larger of the two and count's only 16-bit consumer is written after this point. check_add_overflow() is evaluated first so that total_len is assigned before it is reported. | ||||
| CVE-2026-99087 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-10 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm-integrity: fix NULL pointer dereference when the 'R' flag is used If the dm-integrity device has the SB_FLAG_DIRTY_BITMAP flag set and the user activates the device in the 'R' mode, a crash in dm_integrity_resume happens because the function attempts to read the journal containing the bitmap. This patch makes dm-integrity skip any writes to the device in dm_integrity_resume if the device is activated in the 'R' mode. | ||||
| CVE-2026-99086 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-10 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm-integrity: validate the superblock on resume dm_integrity_resume() re-reads the superblock from the device so that it picks up the flags and the recalculate position. It performs no validation on the result, while the constructor validates the superblock it reads and sizes all the in-memory structures according to it. The user may modify the superblock on the underlying device while the dm-integrity device is suspended, so that the two no longer agree. In particular, access_journal_data() shifts the journal entry index by ic->sb->log2_sectors_per_block, while ic->journal_section_sectors and the journal page list were computed with the value that was present at constructor time. Increasing log2_sectors_per_block makes the index run past the end of the journal, and dm-integrity then writes 512 bytes through lowmem_page_address(NULL). Snapshot the validated superblock in the constructor and refuse to resume if any of the fields that describe the on-disk geometry changed. | ||||
| CVE-2026-99076 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-10 | 3.7 Low |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: udp: Create exceptions before socket matching Currently, when ICMPv6 Packet Too Big and Redirect Message packets are locally delivered and quote a UDP packet, an exception is only created in the IPv6 exception cache if the kernel can match the UDP packet to an existing socket. This behavior allows off-path attackers to conduct a side-channel attack on the exception cache in order to discover the ephemeral port used by a connected UDP socket. Commit 4785305c05b2 ("ipv6: use siphash in rt6_exception_hash()") and commit a00df2caffed ("ipv6: make exception cache less predictible") tried to mitigate such attacks by making it harder for attackers to discover hash collisions in the exception cache and by randomizing the number of exceptions a hash bucket can hold, respectively. Unfortunately, both of the mitigations can be bypassed. Instead, mitigate such attacks by always creating an exception, even before trying to find a matching socket. Do that by calling ip6_update_pmtu() and ip6_redirect(), the helpers used when the quoted packet did not originate from a socket. This means that guesses (right or wrong) from an off-path attacker will always result in an exception being created or updated in the cache that the attacker can observe. Pass the ifindex of the ingress device and the default uid, in a similar fashion to icmpv6_err(). Unlike IPv4, an oif of 0 would not match any nexthop in ip6_redirect_nh_match() and no exception would be created in response to a Redirect Message. Note that this does not allow attackers to create exceptions that they could not create before, as both helpers can already be reached with little to no validation. For example, by sending an ICMPv6 error that quotes an ICMPv6 Echo Reply or one that quotes a UDP source port that matches a wildcard socket. Also note that in the good case (matched socket) the above scheme comes at the cost of an extra route lookup, as the no socket helpers perform their own lookup before the one performed by ip6_sk_update_pmtu() / ip6_sk_redirect(). When the two resolve to different nexthops, it also results in two exceptions being created for the same destination IP. One in the exception cache of the nexthop resolved by the no socket helpers and another in the exception cache of the nexthop used by the socket. | ||||
| CVE-2026-99026 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-10 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: net: team: free skb when broadcast has no txable port bc_transmit() sends the original skb through the last txable port. When no port is txable, it returns false without consuming the skb, but team_xmit() still returns NETDEV_TX_OK. AF_PACKET sends then retain the skb and its socket write-memory charge. A TX-enabled, link-down port keeps the broadcast transmit op installed. Carrier can stay up through a second link-up, TX-disabled port or be forced on by userspace. Free the original skb on the no-port path while leaving the existing drop accounting intact. Discovered by Sashiko during review of previous commit. | ||||
| CVE-2026-99021 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-10 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: regulator: of: fill in supply names in of_regulator_bulk_get_all() of_regulator_bulk_get_all() returns an array it allocated itself, and fills in only the consumer of each entry. Every other way of getting a bulk array has the supply name set, because the caller provides it, and the core expects it to be there: regulator_bulk_enable() prints it when a supply fails to enable, so a caller that hands such an array to it dereferences uninitialised memory on that path. Copy each name into the array's own allocation, right behind the entries, so that it shares the array's lifetime and callers still have nothing extra to free. That also retires the fixed 64 byte stack buffer the names were assembled in, which is_supply_name() never bounded the copy against. | ||||