Export limit exceeded: 430125 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 430125 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 430125 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (430125 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-133652 | 1 Flowintel | 1 Flowintel | 2026-11-20 | N/A |
| Flowintel , contained a session management vulnerability in its browser authentication mechanism. The session identifier used a bare numeric user ID rather than a credential-bound token, resulting in several related weaknesses: - Remembered logins (remember-me cookies) remained valid after a user changed their password, allowing an attacker holding a previously issued cookie to retain access indefinitely. - Server-side session identifiers were not rotated upon login (local, SSO, or remembered), enabling session fixation. - Self-service email and password changes did not require verification of the current password, permitting an attacker with an active session to modify account credentials without knowledge of the existing password. - Administrator-initiated password resets did not revoke other browser sessions, invalidate remembered logins, or rotate the affected user's API key. An attacker who obtained a valid session or remember-me cookie (e.g., through XSS, network interception, or cookie theft) could maintain unauthorized access even after the legitimate user changed their password. Additionally, an attacker with any valid session could change the account's email address or password without knowing the current credentials, effectively taking over the account. Affected versions: Flowintel prior to 4.1.0. | ||||
| CVE-2026-133651 | 1 Flowintel | 1 Flowintel | 2026-11-20 | N/A |
| FlowIntel contained a Cross-Site Request Forgery (CSRF) vulnerability affecting fourteen web routes that performed destructive or state-changing operations. The affected routes accepted HTTP GET requests in addition to (or instead of) POST, which bypassed the Flask-WTF CSRF token validation that is only enforced on non-GET requests. The vulnerable operations included: - Case deletion and case merging - Organisation removal from a case - Task deletion (case and template) - Case template and note template deletion - Connector, connector instance, and icon deletion - Custom tag deletion and status change - Taxonomy and galaxy status changes An attacker who could induce an authenticated user to follow a crafted link or load a page containing a cross-site navigation (e.g., an image tag or redirect) could trigger any of these destructive actions using the victim's session cookie, without the victim's explicit consent or awareness. No special privileges beyond a valid authenticated session with the appropriate role (editor or admin) were required on the victim's account. Security impact: unauthorized deletion or modification of cases, tasks, templates, connectors, icons, custom tags, taxonomies, and galaxies belonging to the victim or the organisation, resulting in loss of data integrity. Affected versions: FlowIntel prior to 4.1.0 | ||||
| CVE-2026-133648 | 1 Flowintel | 1 Flowintel | 2026-11-20 | N/A |
| Flowintel disabled TLS certificate verification for all MISP API connections and used unverified SSL contexts for IMAP and SMTP STARTTLS mail connections. This allowed an on-path (man-in-the-middle) attacker positioned between Flowintel and its MISP or mail servers to impersonate the remote server and intercept sensitive data. Affected connections include: - All MISP HTTPS API calls (event retrieval, attribute search, event creation, connectivity checks, and API validation) - SMTP STARTTLS connections used for sending email notifications - IMAP TLS connections used for fetching mail archives and testing connectivity An attacker who can observe or intercept network traffic between Flowintel and the MISP or mail server could: - Capture MISP API keys and mail credentials (SMTP/IMAP passwords) - Read all threat intelligence data exchanged (events, attributes, objects, reports) - Inject or modify threat intelligence data returned to Flowintel The vulnerability required no authentication on the part of the attacker and no user interaction; it was exploitable by any party with a network position between Flowintel and its configured MISP or mail endpoints. Affected versions: Flowintel prior to 4.1.0. | ||||
| CVE-2026-124330 | 1 Flowci | 1 Flow-core-x | 2026-11-20 | 5 Medium |
| A vulnerability was determined in FlowCI flow-core-x up to 1.23.49. This affects the function exist/save/read/remove of the file store/src/main/java/com/flowci/store/LocalFileManager.java of the component LocalFileManager. This manipulation of the argument fileName causes path traversal. It is possible to initiate the attack remotely. A high degree of complexity is needed for the attack. The exploitability is reported as difficult. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-124329 | 1 Flowci | 1 Flow-core-x | 2026-11-20 | 5 Medium |
| A vulnerability was found in FlowCI flow-core-x up to 1.23.49. The impacted element is the function FileHelper.unzip of the file common/src/main/java/com/flowci/common/helper/FileHelper.java. The manipulation results in path traversal. The attack may be performed from remote. A high complexity level is associated with this attack. The exploitability is regarded as difficult. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-124328 | 1 Flowci | 1 Flow-core-x | 2026-11-20 | 7.4 High |
| A vulnerability has been found in FlowCI flow-core-x up to 1.23.49. The affected element is the function ConditionManagerImpl.run of the file core/src/main/java/com/flowci/core/common/manager/ConditionManagerImpl.java of the component Groovy Script Evaluation. The manipulation of the argument condition leads to code injection. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-124768 | 1 Xone | 1 Xonemanager | 2026-11-20 | N/A |
| Authorization bypass via a user-controlled key in XOneManager 3.8.3.0. The 'ConvertBDToProject' operation selects the database based on 'databasename' without verifying the user’s permissions on it. An authenticated user can link a project to a database outside their scope and identify existing databases based on API responses. | ||||
| CVE-2026-99582 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sctp: re-point retained control chunks on association migration sctp_sock_migrate() transfers DATA chunk ownership but leaves retained control chunks pointing at the old socket. A later retransmission can therefore access the socket after it has been freed. Extend the migration walk to cover retained control chunks and use sctp_control_set_owner_w() to assign their new owner. Reuse the DATA ownership check so each chunk is processed once per pass, even when it is reachable through multiple lists or retained pointers. Preserve a control chunk's existing authentication key across migration so its final release can still generate SCTP_AUTH_FREE_KEY when needed. | ||||
| CVE-2026-99583 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: hold shkey across socket migration sctp_sock_migrate() transfers queued DATA skbs from the old socket to the new one. skb_orphan() invokes sctp_wfree() during that transfer and drops the skb-owned shared-key reference. If userspace has removed that key from the association, this can be the final reference. The following sctp_set_owner_w() then dereferences the freed chunk->shkey while trying to take the new owner reference. Take a temporary shared-key reference before orphaning the skb and release it after the new owner has taken its reference. This preserves the selected authentication key throughout the ownership transfer. Bug found and triaged by OpenAI Security Research and validated by Trail of Bits. | ||||
| CVE-2026-99584 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid folio->mapping dereference in is_{meta, node}_folio() Otherwise, it may cause NULL pointer dereference in race condition: Thread A Thread B - f2fs_setattr - f2fs_truncate - f2fs_truncate_blocks - f2fs_do_truncate_blocks - f2fs_truncate_inode_blocks - truncate_dnode - truncate_node - invalidate_mapping_pages - folio->mapping = NULL - folio_lock - is_node_folio - F2FS_F_SB(folio): dereference on folio->mapping | ||||
| CVE-2026-99585 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Use kvm_s2_fault_vma_info in gmem_abort() gmem_abort() maps at s2fd->fault_ipa, which HPFAR_EL2 holds at 4K granularity whatever the page size. The generic page-table code aligns it, but pkvm_pgtable_stage2_map() looks up existing mappings over [addr, addr + size), so on a pKVM host with pages larger than 4K a guest_memfd-backed guest that faults past the first 4K of a page can find its neighbour's mapping, get -EAGAIN and take the same fault forever. The memory fault exit reports s2fd->fault_ipa too, which for a nested guest's fault is the nested IPA rather than the canonical one kvm_gmem_get_pfn() failed on. Take the addresses from kvm_s2_fault_vma_info instead, as user_mem_abort() does, and report the canonical gfn in the memory fault exit. kvm_s2_fault_get_vma_info() itself isn't called: a guest_memfd memslot's userspace_addr doesn't need to be backed by a VMA. | ||||
| CVE-2026-99586 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3: Handle ARM erratum for CONT under invalidation with SVA The erratum (MMU-700: #3777127, S3: #3673557) deals with under invalidation of a CONT PTE grouping in the SMMU. The recommended work around is to use a range invalidation that spans the entire CONT. The only user of CONT in the kernel right now is through SVA sharing a CPU page table that contains a CONT created by the mm. Previously it was thought that this errata was dealt with because the driver always uses range invalidation. However, there is a subtle detail in the errata that the invalidation range must fully enclose the entire CONT for it to work. It seems that two sequential range invalidations, with a split point falling inside a CONT grouping, will not prevent the errata. The SMMU's range invalidation generation algorithm does not produce a single invalidation for a single SVA invalidation request, nor does the mm carefully align the SVA invalidation ranges to accommodate the splitting of the invalidation into several ranges. Thus, when processing a SVA invalidation, the range invalidation splitting routine can generate a range invalidation that is split in the middle of the CONT and risk under invalidation from this errata. This condition could be triggered by a malicious userspace manipulating the TLB gathers via mmap/mprotect/munmap. Update the errata list to the include the S3 variation, detect the IOMMUs that have it, and then have SVA invalidations use a simplified version of the over invalidation algorithm from the tlbi rework series. This ensures that a single range invalidation is issued for a single MMU notifier callback and now the range invalidation is guarenteed to cover any posible CONT. Future work to add CONT to iommu_domain page tables should either use this one-invalidate/one-range invalidation algorithm or disable CONT support in the iommu_domain. | ||||
| CVE-2026-99587 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ata: libata-scsi: reject data-in commands with a data-out buffer SG_IO can submit a data-in SCSI command with DMA_TO_DEVICE. The scatterlist can then contain pages pinned without write access. ata_scsi_rbuf_fill() writes simulated replies to that scatterlist; in the reported case, the copy tried to write the shared zero page and faulted in the kernel. The same mismatch can affect SG_IO commands translated by libata. ZBC IN and GET PHYSICAL ELEMENT STATUS completion handlers can modify the receive buffer even if the drive aborts the command. For ATAPI, the successful INQUIRY completion also rewrites the buffer in atapi_fixup_inquiry(). Reject these mismatched commands before the buffer is written or the command is issued. Report ABORTED COMMAND / DATA IN BUFFER ERROR because the CDB itself can be valid; the supplied transfer direction is wrong. | ||||
| CVE-2026-99588 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 4.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: only update flags for TT events In the first implementation of the translation table events, it was only possible to announce: * ADD: new locally detected client * DEL: disappeared local client If an ADD event was queued and then a DEL event was queued in the same timeslot, it is valid to destroy both events because nothing actually changed for remode nodes But with commit 3c4f7ab60cc2 ("batman-adv: improve the TT component to support runtime flag changes") and subsequent changes, it could also happen that there are extra ADD events: * ADD: _NEW_ locally detected client * ADD: already existing client with new flags * DEL: disappeared local client The first and the last type of event could in theory still be removed together from the (to be announced) events queue. But if the "update flags" ADD is dropped together with the DEL, it would still leave global translation table of a remote node in the incorrect state - believing that the client didn't disappear. If a detected client was previously announced, a DEL event must only overwrite the "update flags" ADD but the DEL itself must still continue to exist in the (to be anounced) events queue. For now, adjustment of the announced flags is used for everything instead of dropping already queued up events completely. Similarly, a DEL followed by an ADD caused both entries to be deleted. But the new ADD could announce flags changes which were not yet present for the client before it was marked for DELetion. The new ADD must therefore only overwrite the DEL - but still be kept. | ||||
| CVE-2026-99589 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: clear ROAM flag when re-adding a pending local client When a ROAMING_ADV is received for an announced local client, batadv_tt_local_mark_removed() sets BATADV_TT_CLIENT_ROAM, queues a DEL|ROAM change and marks the entry as BATADV_TT_CLIENT_PENDING. If the client sends a frame again before the next TTVN commit, batadv_tt_local_add_existing() only clears the PENDING flag and returns early. The ADD cancels the queued DEL, but the entry keeps the ROAM flag: * batadv_is_my_client() reports the client as not served by this node * batadv_tt_local_client_is_roaming() reroutes unicast frames for it to the node which sent the ROAMING_ADV The ROAM flag is only removed with the next frame of the client. Since BATADV_TT_CLIENT_ROAM is set together with BATADV_TT_CLIENT_PENDING, it has to be cleared also at the same time with BATADV_TT_CLIENT_PENDING when the client roamed back. | ||||
| CVE-2026-99590 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ceph: clamp the inline data length in ceph_fill_inline_data() The MDS decides how much inline data to attach to a reply, and the client parses inline_len without any upper bound: ceph_decode_need() only verifies that the message actually carries that many bytes. ceph_fill_inline_data() then copies the data into a single folio with no length check, so a malicious or buggy MDS returning more inline data than the folio can hold writes past its end. Clamp the length to folio_size() so both callers, handle_cap_grant() and fill_inode(), are covered. | ||||
| CVE-2026-99591 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Force device table to maximum size IOMMU can perform out-of-bounds read of the device table entry (DTE) that is adjacent to the last DTE and falls outside the device table. For example, if the device table can hold 0 to N-1 entries, then the IOMMU can be made to fetch the Nth entry, which falls outside the device table. The device table is owned by the hypervisor (HV) and is assigned in 4KB pages that are contiguous in system physical address (SPA). If the out-of-bound DTE falls on a guest-owned page, then the guest can exploit this bug to setup malicious table walks to corrupt HV pages and/or bring down the system. Note that this bug does not manifest when the device table size is set to its maximum size of 2MB. Therefore, force the device table size to the maximum 2MB on affected processors. These are CPU family 0x17 (Zen1/Zen2) through family 0x1a (Zen5/BRH). This is a mitigation for CVE-2024-21963. kdump reuses the previous kernel's device table only when the size encoded in the IOMMU device-table register matches pci_seg->dev_table_size. A mixed rollout disagrees: the unpatched kernel uses the IVRS-derived size and the patched kernel uses 2MB, so __reuse_device_table() rejects the table. On SNP-capable IOMMUs that rejection panics the kdump kernel. Kernels that both have this patch agree on 2MB and reuse succeeds. Update the production kernel and the crash kernel together. | ||||
| CVE-2026-99592 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: x86/mm: Fix global ASID handed out to two processes On AMD CPUs with INVLPGB, two live processes can get the same MAX_ASID_AVAILABLE global ASID value. The two then hit each other's TLB entries, so each can read or corrupt the other's memory. The global ASID space is managed lazily. When a global ASID is freed, its bit is set in the global_asid_freed bitmap. Once the free ASID search reaches the end of the global_asid_used bitmap, a global flush is done to really reclaim the lazily freed global ASIDs. However, the current code can assign the same global ASID to two different processes, if one process is assigned MAX_ASID_AVAILABLE - 1, another process MAX_ASID_AVAILABLE, and both stick around (keeping their global ASID numbers in use) until the search wraps around again. At that point a third process could also get assigned MAX_ASID_AVAILABLE. the highest ASID stays in use, so it is not handed out again last_global_asid stays below it, so no reset the clear bits run out find_next_zero_bit() returns MAX_ASID_AVAILABLE global_asid_available > 0, so the failure is not caught MAX_ASID_AVAILABLE is handed out as an ASID A search only looks at the bits below MAX_ASID_AVAILABLE, so it cannot see that this value is in use. The next failed search hands it out again, even if the first process still holds it. The fix used here is to reset the global ASID space after a failed search, and to search again. If that search fails too, no global ASID is handed out. The test for !global_asid_available is removed, because use_global_asid() only calls allocate_global_asid() if global_asid_available > 0. The remaining test is for a condition that should be impossible. [ riel: simplify code, massage changelog and comment ] | ||||
| CVE-2026-99593 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: arm64: sdei: Preserve the interrupted context's exception registers An SDEI event is dispatched by firmware regardless of PSTATE.DAIF, so it can interrupt the kernel where the exception registers are live: - exception entry, before kernel_entry has saved ELR_EL1/SPSR_EL1 and before the C handler has read ESR_EL1/FAR_EL1; - exception return, after kernel_exit has loaded ELR_EL1/SPSR_EL1 and before the ERET. An IRQ or pseudo-NMI cannot arrive there with PSTATE.I set. Firmware saves only x0-x17, PC and PSTATE around an SDEI event, so a synchronous exception taken by the handler overwrites the interrupted context's ELR, SPSR, ESR and FAR. do_sdei_event() only notices that ELR changed, and warns. The interrupted context then carries on with the handler's state. A task interrupted on its way into the kernel can be sent SIGILL for the handler's kernel data abort. A task interrupted on its way back to user space ERETs to EL1, at the handler's fixup address, with user registers loaded. With SDEI delivering NMI backtraces, this happens in normal operation. The handler runs show_regs(), which reads through possibly-NULL pointers with the _nofault() accessors. print_worker_info() faults this way for a kworker that is not running a work item, and a single sysrq-l warned once per such kworker. Save ELR, SPSR, ESR and FAR in __sdei_handler() before irqentry_nmi_enter(), which can take an exception too, and restore them after irqentry_nmi_exit(). Once they are restored, a nested exception is harmless if its handler is safe in NMI context. That holds for EL1 data aborts on translation, permission and access-flag faults, which never take the mmap lock in NMI context, and for BRK. Warn once, with the syndrome, about any other exception class. | ||||
| CVE-2026-99596 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvme: wait for SRCU readers before splicing the namespace list Readers walk ctrl->namespaces under ctrl->srcu, and some of them sleep there, e.g. nvme_wait_freeze() waiting for I/O to drain. nvme_remove_namespaces() moves the list onto its on-stack ns_list with list_splice_init_rcu(), which only waits for RCU readers before relinking the entries. A reader still on the last namespace then follows its next pointer to ns_list instead of ctrl->namespaces and treats the stack as a namespace. Deleting a controller while a Format NVM passthrough waits for a delayed read on the last namespace gives: BUG: KASAN: stack-out-of-bounds in nvme_wait_freeze+0x102/0x120 Read of size 8 at addr ff110001d2f3fc38 by task nvme/4413 Call Trace: nvme_wait_freeze nvme_passthru_start nvme_submit_user_cmd nvme_user_cmd nvme_dev_ioctl BUG: unable to handle page fault for address: ffffffff8af04850 Use list_splice_init_srcu() instead, which waits for the SRCU readers. This also takes the RCU grace period out of every controller deletion. Deleting 64 tcp controllers with one namespace each, median of 3 runs on each of two boots per kernel: before after nvme disconnect-all (ms) 3491 / 3509 2996 / 3165 nvme_remove_namespaces() avg (ms) 39.0 / 40.5 31.9 / 34.7 | ||||