Export limit exceeded: 36454 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (36454 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-38105 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Kill timer properly at removal The USB-audio MIDI code initializes the timer, but in a rare case, the driver might be freed without the disconnect call. This leaves the timer in an active state while the assigned object is released via snd_usbmidi_free(), which ends up with a kernel warning when the debug configuration is enabled, as spotted by fuzzer. For avoiding the problem, put timer_shutdown_sync() at snd_usbmidi_free(), so that the timer can be killed properly. While we're at it, replace the existing timer_delete_sync() at the disconnect callback with timer_shutdown_sync(), too. | ||||
| CVE-2025-38099 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Disable SCO support if READ_VOICE_SETTING is unsupported/broken A SCO connection without the proper voice_setting can cause the controller to lock up. | ||||
| CVE-2025-38096 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: don't warn when if there is a FW error iwl_trans_reclaim is warning if it is called when the FW is not alive. But if it is called when there is a pending restart, i.e. after a FW error, there is no need to warn, instead - return silently. | ||||
| CVE-2025-38071 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/mm: Check return value from memblock_phys_alloc_range() At least with CONFIG_PHYSICAL_START=0x100000, if there is < 4 MiB of contiguous free memory available at this point, the kernel will crash and burn because memblock_phys_alloc_range() returns 0 on failure, which leads memblock_phys_free() to throw the first 4 MiB of physical memory to the wolves. At a minimum it should fail gracefully with a meaningful diagnostic, but in fact everything seems to work fine without the weird reserve allocation. | ||||
| CVE-2025-38067 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rseq: Fix segfault on registration when rseq_cs is non-zero The rseq_cs field is documented as being set to 0 by user-space prior to registration, however this is not currently enforced by the kernel. This can result in a segfault on return to user-space if the value stored in the rseq_cs field doesn't point to a valid struct rseq_cs. The correct solution to this would be to fail the rseq registration when the rseq_cs field is non-zero. However, some older versions of glibc will reuse the rseq area of previous threads without clearing the rseq_cs field and will also terminate the process if the rseq registration fails in a secondary thread. This wasn't caught in testing because in this case the leftover rseq_cs does point to a valid struct rseq_cs. What we can do is clear the rseq_cs field on registration when it's non-zero which will prevent segfaults on registration and won't break the glibc versions that reuse rseq areas on thread creation. | ||||
| CVE-2025-38063 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm: fix unconditional IO throttle caused by REQ_PREFLUSH When a bio with REQ_PREFLUSH is submitted to dm, __send_empty_flush() generates a flush_bio with REQ_OP_WRITE | REQ_PREFLUSH | REQ_SYNC, which causes the flush_bio to be throttled by wbt_wait(). An example from v5.4, similar problem also exists in upstream: crash> bt 2091206 PID: 2091206 TASK: ffff2050df92a300 CPU: 109 COMMAND: "kworker/u260:0" #0 [ffff800084a2f7f0] __switch_to at ffff80004008aeb8 #1 [ffff800084a2f820] __schedule at ffff800040bfa0c4 #2 [ffff800084a2f880] schedule at ffff800040bfa4b4 #3 [ffff800084a2f8a0] io_schedule at ffff800040bfa9c4 #4 [ffff800084a2f8c0] rq_qos_wait at ffff8000405925bc #5 [ffff800084a2f940] wbt_wait at ffff8000405bb3a0 #6 [ffff800084a2f9a0] __rq_qos_throttle at ffff800040592254 #7 [ffff800084a2f9c0] blk_mq_make_request at ffff80004057cf38 #8 [ffff800084a2fa60] generic_make_request at ffff800040570138 #9 [ffff800084a2fae0] submit_bio at ffff8000405703b4 #10 [ffff800084a2fb50] xlog_write_iclog at ffff800001280834 [xfs] #11 [ffff800084a2fbb0] xlog_sync at ffff800001280c3c [xfs] #12 [ffff800084a2fbf0] xlog_state_release_iclog at ffff800001280df4 [xfs] #13 [ffff800084a2fc10] xlog_write at ffff80000128203c [xfs] #14 [ffff800084a2fcd0] xlog_cil_push at ffff8000012846dc [xfs] #15 [ffff800084a2fda0] xlog_cil_push_work at ffff800001284a2c [xfs] #16 [ffff800084a2fdb0] process_one_work at ffff800040111d08 #17 [ffff800084a2fe00] worker_thread at ffff8000401121cc #18 [ffff800084a2fe70] kthread at ffff800040118de4 After commit 2def2845cc33 ("xfs: don't allow log IO to be throttled"), the metadata submitted by xlog_write_iclog() should not be throttled. But due to the existence of the dm layer, throttling flush_bio indirectly causes the metadata bio to be throttled. Fix this by conditionally adding REQ_IDLE to flush_bio.bi_opf, which makes wbt_should_throttle() return false to avoid wbt_wait(). | ||||
| CVE-2025-38061 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: pktgen: fix access outside of user given buffer in pktgen_thread_write() Honour the user given buffer size for the strn_len() calls (otherwise strn_len() will access memory outside of the user given buffer). | ||||
| CVE-2025-38047 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/fred: Fix system hang during S4 resume with FRED enabled Upon a wakeup from S4, the restore kernel starts and initializes the FRED MSRs as needed from its perspective. It then loads a hibernation image, including the image kernel, and attempts to load image pages directly into their original page frames used before hibernation unless those frames are currently in use. Once all pages are moved to their original locations, it jumps to a "trampoline" page in the image kernel. At this point, the image kernel takes control, but the FRED MSRs still contain values set by the restore kernel, which may differ from those set by the image kernel before hibernation. Therefore, the image kernel must ensure the FRED MSRs have the same values as before hibernation. Since these values depend only on the location of the kernel text and data, they can be recomputed from scratch. | ||||
| CVE-2025-38044 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: cx231xx: set device_caps for 417 The video_device for the MPEG encoder did not set device_caps. Add this, otherwise the video device can't be registered (you get a WARN_ON instead). Not seen before since currently 417 support is disabled, but I found this while experimenting with it. | ||||
| CVE-2025-38040 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: mctrl_gpio: split disable_ms into sync and no_sync APIs The following splat has been observed on a SAMA5D27 platform using atmel_serial: BUG: sleeping function called from invalid context at kernel/irq/manage.c:738 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 27, name: kworker/u5:0 preempt_count: 1, expected: 0 INFO: lockdep is turned off. irq event stamp: 0 hardirqs last enabled at (0): [<00000000>] 0x0 hardirqs last disabled at (0): [<c01588f0>] copy_process+0x1c4c/0x7bec softirqs last enabled at (0): [<c0158944>] copy_process+0x1ca0/0x7bec softirqs last disabled at (0): [<00000000>] 0x0 CPU: 0 UID: 0 PID: 27 Comm: kworker/u5:0 Not tainted 6.13.0-rc7+ #74 Hardware name: Atmel SAMA5 Workqueue: hci0 hci_power_on [bluetooth] Call trace: unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x44/0x70 dump_stack_lvl from __might_resched+0x38c/0x598 __might_resched from disable_irq+0x1c/0x48 disable_irq from mctrl_gpio_disable_ms+0x74/0xc0 mctrl_gpio_disable_ms from atmel_disable_ms.part.0+0x80/0x1f4 atmel_disable_ms.part.0 from atmel_set_termios+0x764/0x11e8 atmel_set_termios from uart_change_line_settings+0x15c/0x994 uart_change_line_settings from uart_set_termios+0x2b0/0x668 uart_set_termios from tty_set_termios+0x600/0x8ec tty_set_termios from ttyport_set_flow_control+0x188/0x1e0 ttyport_set_flow_control from wilc_setup+0xd0/0x524 [hci_wilc] wilc_setup [hci_wilc] from hci_dev_open_sync+0x330/0x203c [bluetooth] hci_dev_open_sync [bluetooth] from hci_dev_do_open+0x40/0xb0 [bluetooth] hci_dev_do_open [bluetooth] from hci_power_on+0x12c/0x664 [bluetooth] hci_power_on [bluetooth] from process_one_work+0x998/0x1a38 process_one_work from worker_thread+0x6e0/0xfb4 worker_thread from kthread+0x3d4/0x484 kthread from ret_from_fork+0x14/0x28 This warning is emitted when trying to toggle, at the highest level, some flow control (with serdev_device_set_flow_control) in a device driver. At the lowest level, the atmel_serial driver is using serial_mctrl_gpio lib to enable/disable the corresponding IRQs accordingly. The warning emitted by CONFIG_DEBUG_ATOMIC_SLEEP is due to disable_irq (called in mctrl_gpio_disable_ms) being possibly called in some atomic context (some tty drivers perform modem lines configuration in regions protected by port lock). Split mctrl_gpio_disable_ms into two differents APIs, a non-blocking one and a blocking one. Replace mctrl_gpio_disable_ms calls with the relevant version depending on whether the call is protected by some port lock. | ||||
| CVE-2025-38039 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Avoid WARN_ON when configuring MQPRIO with HTB offload enabled When attempting to enable MQPRIO while HTB offload is already configured, the driver currently returns `-EINVAL` and triggers a `WARN_ON`, leading to an unnecessary call trace. Update the code to handle this case more gracefully by returning `-EOPNOTSUPP` instead, while also providing a helpful user message. | ||||
| CVE-2025-38037 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: Annotate FDB data races The 'used' and 'updated' fields in the FDB entry structure can be accessed concurrently by multiple threads, leading to reports such as [1]. Can be reproduced using [2]. Suppress these reports by annotating these accesses using READ_ONCE() / WRITE_ONCE(). [1] BUG: KCSAN: data-race in vxlan_xmit / vxlan_xmit write to 0xffff942604d263a8 of 8 bytes by task 286 on cpu 0: vxlan_xmit+0xb29/0x2380 dev_hard_start_xmit+0x84/0x2f0 __dev_queue_xmit+0x45a/0x1650 packet_xmit+0x100/0x150 packet_sendmsg+0x2114/0x2ac0 __sys_sendto+0x318/0x330 __x64_sys_sendto+0x76/0x90 x64_sys_call+0x14e8/0x1c00 do_syscall_64+0x9e/0x1a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f read to 0xffff942604d263a8 of 8 bytes by task 287 on cpu 2: vxlan_xmit+0xadf/0x2380 dev_hard_start_xmit+0x84/0x2f0 __dev_queue_xmit+0x45a/0x1650 packet_xmit+0x100/0x150 packet_sendmsg+0x2114/0x2ac0 __sys_sendto+0x318/0x330 __x64_sys_sendto+0x76/0x90 x64_sys_call+0x14e8/0x1c00 do_syscall_64+0x9e/0x1a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f value changed: 0x00000000fffbac6e -> 0x00000000fffbac6f Reported by Kernel Concurrency Sanitizer on: CPU: 2 UID: 0 PID: 287 Comm: mausezahn Not tainted 6.13.0-rc7-01544-gb4b270f11a02 #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 [2] #!/bin/bash set +H echo whitelist > /sys/kernel/debug/kcsan echo !vxlan_xmit > /sys/kernel/debug/kcsan ip link add name vx0 up type vxlan id 10010 dstport 4789 local 192.0.2.1 bridge fdb add 00:11:22:33:44:55 dev vx0 self static dst 198.51.100.1 taskset -c 0 mausezahn vx0 -a own -b 00:11:22:33:44:55 -c 0 -q & taskset -c 2 mausezahn vx0 -a own -b 00:11:22:33:44:55 -c 0 -q & | ||||
| CVE-2025-38014 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Refactor remove call with idxd_cleanup() helper The idxd_cleanup() helper cleans up perfmon, interrupts, internals and so on. Refactor remove call with the idxd_cleanup() helper to avoid code duplication. Note, this also fixes the missing put_device() for idxd groups, enginces and wqs. | ||||
| CVE-2025-38009 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: disable napi on driver removal A warning on driver removal started occurring after commit 9dd05df8403b ("net: warn if NAPI instance wasn't shut down"). Disable tx napi before deleting it in mt76_dma_cleanup(). WARNING: CPU: 4 PID: 18828 at net/core/dev.c:7288 __netif_napi_del_locked+0xf0/0x100 CPU: 4 UID: 0 PID: 18828 Comm: modprobe Not tainted 6.15.0-rc4 #4 PREEMPT(lazy) Hardware name: ASUS System Product Name/PRIME X670E-PRO WIFI, BIOS 3035 09/05/2024 RIP: 0010:__netif_napi_del_locked+0xf0/0x100 Call Trace: <TASK> mt76_dma_cleanup+0x54/0x2f0 [mt76] mt7921_pci_remove+0xd5/0x190 [mt7921e] pci_device_remove+0x47/0xc0 device_release_driver_internal+0x19e/0x200 driver_detach+0x48/0x90 bus_remove_driver+0x6d/0xf0 pci_unregister_driver+0x2e/0xb0 __do_sys_delete_module.isra.0+0x197/0x2e0 do_syscall_64+0x7b/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e Tested with mt7921e but the same pattern can be actually applied to other mt76 drivers calling mt76_dma_cleanup() during removal. Tx napi is enabled in their *_dma_init() functions and only toggled off and on again inside their suspend/resume/reset paths. So it should be okay to disable tx napi in such a generic way. Found by Linux Verification Center (linuxtesting.org). | ||||
| CVE-2025-37986 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: class: Invalidate USB device pointers on partner unregistration To avoid using invalid USB device pointers after a Type-C partner disconnects, this patch clears the pointers upon partner unregistration. This ensures a clean state for future connections. | ||||
| CVE-2025-37978 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: integrity: Do not call set_page_dirty_lock() Placing multiple protection information buffers inside the same page can lead to oopses because set_page_dirty_lock() can't be called from interrupt context. Since a protection information buffer is not backed by a file there is no point in setting its page dirty, there is nothing to synchronize. Drop the call to set_page_dirty_lock() and remove the last argument to bio_integrity_unpin_bvec(). | ||||
| CVE-2025-37963 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm64: bpf: Only mitigate cBPF programs loaded by unprivileged users Support for eBPF programs loaded by unprivileged users is typically disabled. This means only cBPF programs need to be mitigated for BHB. In addition, only mitigate cBPF programs that were loaded by an unprivileged user. Privileged users can also load the same program via eBPF, making the mitigation pointless. | ||||
| CVE-2025-37960 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: memblock: Accept allocated memory before use in memblock_double_array() When increasing the array size in memblock_double_array() and the slab is not yet available, a call to memblock_find_in_range() is used to reserve/allocate memory. However, the range returned may not have been accepted, which can result in a crash when booting an SNP guest: RIP: 0010:memcpy_orig+0x68/0x130 Code: ... RSP: 0000:ffffffff9cc03ce8 EFLAGS: 00010006 RAX: ff11001ff83e5000 RBX: 0000000000000000 RCX: fffffffffffff000 RDX: 0000000000000bc0 RSI: ffffffff9dba8860 RDI: ff11001ff83e5c00 RBP: 0000000000002000 R08: 0000000000000000 R09: 0000000000002000 R10: 000000207fffe000 R11: 0000040000000000 R12: ffffffff9d06ef78 R13: ff11001ff83e5000 R14: ffffffff9dba7c60 R15: 0000000000000c00 memblock_double_array+0xff/0x310 memblock_add_range+0x1fb/0x2f0 memblock_reserve+0x4f/0xa0 memblock_alloc_range_nid+0xac/0x130 memblock_alloc_internal+0x53/0xc0 memblock_alloc_try_nid+0x3d/0xa0 swiotlb_init_remap+0x149/0x2f0 mem_init+0xb/0xb0 mm_core_init+0x8f/0x350 start_kernel+0x17e/0x5d0 x86_64_start_reservations+0x14/0x30 x86_64_start_kernel+0x92/0xa0 secondary_startup_64_no_verify+0x194/0x19b Mitigate this by calling accept_memory() on the memory range returned before the slab is available. Prior to v6.12, the accept_memory() interface used a 'start' and 'end' parameter instead of 'start' and 'size', therefore the accept_memory() call must be adjusted to specify 'start + size' for 'end' when applying to kernels prior to v6.12. | ||||
| CVE-2025-37948 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm64: bpf: Add BHB mitigation to the epilogue for cBPF programs A malicious BPF program may manipulate the branch history to influence what the hardware speculates will happen next. On exit from a BPF program, emit the BHB mititgation sequence. This is only applied for 'classic' cBPF programs that are loaded by seccomp. | ||||
| CVE-2025-37932 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sch_htb: make htb_qlen_notify() idempotent htb_qlen_notify() always deactivates the HTB class and in fact could trigger a warning if it is already deactivated. Therefore, it is not idempotent and not friendly to its callers, like fq_codel_dequeue(). Let's make it idempotent to ease qdisc_tree_reduce_backlog() callers' life. | ||||