Export limit exceeded: 36461 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (36461 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-22064 | 1 Linux | 1 Linux Kernel | 2025-10-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: don't unregister hook when table is dormant When nf_tables_updchain encounters an error, hook registration needs to be rolled back. This should only be done if the hook has been registered, which won't happen when the table is flagged as dormant (inactive). Just move the assignment into the registration block. | ||||
| CVE-2025-22046 | 1 Linux | 1 Linux Kernel | 2025-10-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: uprobes/x86: Harden uretprobe syscall trampoline check Jann reported a possible issue when trampoline_check_ip returns address near the bottom of the address space that is allowed to call into the syscall if uretprobes are not set up: https://lore.kernel.org/bpf/202502081235.5A6F352985@keescook/T/#m9d416df341b8fbc11737dacbcd29f0054413cbbf Though the mmap minimum address restrictions will typically prevent creating mappings there, let's make sure uretprobe syscall checks for that. | ||||
| CVE-2025-41108 | 2 Ghost Robotics, Ghostrobotics | 3 Vision 60, Vision 60, Vision 60 Firmware | 2025-10-31 | 9.8 Critical |
| The communication protocol implemented in Ghost Robotics Vision 60 v0.27.2 could allow an attacker to send commands to the robot from an external attack station, impersonating the control station (tablet) and gaining unauthorised full control of the robot. The absence of encryption and authentication mechanisms in the communication protocol allows an attacker to capture legitimate traffic between the robot and the controller, replicate it, and send any valid command to the robot from any attacking computer or device. The communication protocol used in this interface is based on MAVLink, a widely documented protocol, which increases the likelihood of attack. There are two methods for connecting to the robot remotely: Wi-Fi and 4G/LTE. | ||||
| CVE-2025-41109 | 2 Ghost Robotics, Ghostrobotics | 3 Vision 60, Vision 60, Vision 60 Firmware | 2025-10-31 | 4.6 Medium |
| Ghost Robotics Vision 60 v0.27.2 includes, among its physical interfaces, three RJ45 connectors and a USB Type-C port. The vulnerability is due to the lack of authentication mechanisms when establishing connections through these ports. Specifically, with regard to network connectivity, the robot's internal router automatically assigns IP addresses to any device physically connected to it. An attacker could connect a WiFi access point under their control to gain access to the robot's network without needing the credentials for the deployed network. Once inside, the attacker can monitor all its data, as the robot runs on ROS 2 without authentication by default. | ||||
| CVE-2025-9240 | 2 Eladmin, Elunez | 2 Eladmin, Eladmin | 2025-10-31 | 4.3 Medium |
| A security flaw has been discovered in elunez eladmin up to 2.7. Affected by this issue is some unknown functionality of the file /auth/info. The manipulation results in information disclosure. The attack can be launched remotely. The exploit has been released to the public and may be exploited. | ||||
| CVE-2025-21903 | 1 Linux | 1 Linux Kernel | 2025-10-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mctp i3c: handle NULL header address daddr can be NULL if there is no neighbour table entry present, in that case the tx packet should be dropped. saddr will usually be set by MCTP core, but check for NULL in case a packet is transmitted by a different protocol. | ||||
| CVE-2025-21902 | 1 Linux | 1 Linux Kernel | 2025-10-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: acpi: typec: ucsi: Introduce a ->poll_cci method For the ACPI backend of UCSI the UCSI "registers" are just a memory copy of the register values in an opregion. The ACPI implementation in the BIOS ensures that the opregion contents are synced to the embedded controller and it ensures that the registers (in particular CCI) are synced back to the opregion on notifications. While there is an ACPI call that syncs the actual registers to the opregion there is rarely a need to do this and on some ACPI implementations it actually breaks in various interesting ways. The only reason to force a sync from the embedded controller is to poll CCI while notifications are disabled. Only the ucsi core knows if this is the case and guessing based on the current command is suboptimal, i.e. leading to the following spurious assertion splat: WARNING: CPU: 3 PID: 76 at drivers/usb/typec/ucsi/ucsi.c:1388 ucsi_reset_ppm+0x1b4/0x1c0 [typec_ucsi] CPU: 3 UID: 0 PID: 76 Comm: kworker/3:0 Not tainted 6.12.11-200.fc41.x86_64 #1 Hardware name: LENOVO 21D0/LNVNB161216, BIOS J6CN45WW 03/17/2023 Workqueue: events_long ucsi_init_work [typec_ucsi] RIP: 0010:ucsi_reset_ppm+0x1b4/0x1c0 [typec_ucsi] Call Trace: <TASK> ucsi_init_work+0x3c/0xac0 [typec_ucsi] process_one_work+0x179/0x330 worker_thread+0x252/0x390 kthread+0xd2/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Thus introduce a ->poll_cci() method that works like ->read_cci() with an additional forced sync and document that this should be used when polling with notifications disabled. For all other backends that presumably don't have this issue use the same implementation for both methods. | ||||
| CVE-2022-40139 | 2 Microsoft, Trendmicro | 2 Windows, Apex One | 2025-10-31 | 7.2 High |
| Improper validation of some components used by the rollback mechanism in Trend Micro Apex One and Trend Micro Apex One as a Service clients could allow a Apex One server administrator to instruct affected clients to download an unverified rollback package, which could lead to remote code execution. Please note: an attacker must first obtain Apex One server administration console access in order to exploit this vulnerability. | ||||
| CVE-2024-38595 | 1 Linux | 1 Linux Kernel | 2025-10-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix peer devlink set for SF representor devlink port The cited patch change register devlink flow, and neglect to reflect the changes for peer devlink set logic. Peer devlink set is triggering a call trace if done after devl_register.[1] Hence, align peer devlink set logic with register devlink flow. [1] WARNING: CPU: 4 PID: 3394 at net/devlink/core.c:155 devlink_rel_nested_in_add+0x177/0x180 CPU: 4 PID: 3394 Comm: kworker/u40:1 Not tainted 6.9.0-rc4_for_linust_min_debug_2024_04_16_14_08 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5_vhca_event0 mlx5_vhca_state_work_handler [mlx5_core] RIP: 0010:devlink_rel_nested_in_add+0x177/0x180 Call Trace: <TASK> ? __warn+0x78/0x120 ? devlink_rel_nested_in_add+0x177/0x180 ? report_bug+0x16d/0x180 ? handle_bug+0x3c/0x60 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? devlink_port_init+0x30/0x30 ? devlink_port_type_clear+0x50/0x50 ? devlink_rel_nested_in_add+0x177/0x180 ? devlink_rel_nested_in_add+0xdd/0x180 mlx5_sf_mdev_event+0x74/0xb0 [mlx5_core] notifier_call_chain+0x35/0xb0 blocking_notifier_call_chain+0x3d/0x60 mlx5_blocking_notifier_call_chain+0x22/0x30 [mlx5_core] mlx5_sf_dev_probe+0x185/0x3e0 [mlx5_core] auxiliary_bus_probe+0x38/0x80 ? driver_sysfs_add+0x51/0x80 really_probe+0xc5/0x3a0 ? driver_probe_device+0x90/0x90 __driver_probe_device+0x80/0x160 driver_probe_device+0x1e/0x90 __device_attach_driver+0x7d/0x100 bus_for_each_drv+0x80/0xd0 __device_attach+0xbc/0x1f0 bus_probe_device+0x86/0xa0 device_add+0x64f/0x860 __auxiliary_device_add+0x3b/0xa0 mlx5_sf_dev_add+0x139/0x330 [mlx5_core] mlx5_sf_dev_state_change_handler+0x1e4/0x250 [mlx5_core] notifier_call_chain+0x35/0xb0 blocking_notifier_call_chain+0x3d/0x60 mlx5_vhca_state_work_handler+0x151/0x200 [mlx5_core] process_one_work+0x13f/0x2e0 worker_thread+0x2bd/0x3c0 ? rescuer_thread+0x410/0x410 kthread+0xc4/0xf0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x2d/0x50 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 </TASK> | ||||
| CVE-2024-58082 | 1 Linux | 1 Linux Kernel | 2025-10-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: nuvoton: Fix an error check in npcm_video_ece_init() When function of_find_device_by_node() fails, it returns NULL instead of an error code. So the corresponding error check logic should be modified to check whether the return value is NULL and set the error code to be returned as -ENODEV. | ||||
| CVE-2024-40766 | 1 Sonicwall | 52 Nsa 2650, Nsa 2700, Nsa 3600 and 49 more | 2025-10-31 | 9.3 Critical |
| An improper access control vulnerability has been identified in the SonicWall SonicOS management access, potentially leading to unauthorized resource access and in specific conditions, causing the firewall to crash. This issue affects SonicWall Firewall Gen 5 and Gen 6 devices, as well as Gen 7 devices running SonicOS 7.0.1-5035 and older versions. | ||||
| CVE-2021-44515 | 1 Zohocorp | 1 Manageengine Desktop Central | 2025-10-31 | 9.8 Critical |
| Zoho ManageEngine Desktop Central is vulnerable to authentication bypass, leading to remote code execution on the server, as exploited in the wild in December 2021. For Enterprise builds 10.1.2127.17 and earlier, upgrade to 10.1.2127.18. For Enterprise builds 10.1.2128.0 through 10.1.2137.2, upgrade to 10.1.2137.3. For MSP builds 10.1.2127.17 and earlier, upgrade to 10.1.2127.18. For MSP builds 10.1.2128.0 through 10.1.2137.2, upgrade to 10.1.2137.3. | ||||
| CVE-2023-38606 | 1 Apple | 5 Ipados, Iphone Os, Macos and 2 more | 2025-10-31 | 5.5 Medium |
| This issue was addressed with improved state management. This issue is fixed in macOS Monterey 12.6.8, iOS 15.7.8 and iPadOS 15.7.8, iOS 16.6 and iPadOS 16.6, tvOS 16.6, macOS Big Sur 11.7.9, macOS Ventura 13.5, watchOS 9.6. An app may be able to modify sensitive kernel state. Apple is aware of a report that this issue may have been actively exploited against versions of iOS released before iOS 15.7.1. | ||||
| CVE-2020-8467 | 1 Trendmicro | 2 Apex One, Officescan | 2025-10-31 | 8.8 High |
| A migration tool component of Trend Micro Apex One (2019) and OfficeScan XG contains a vulnerability which could allow remote attackers to execute arbitrary code on affected installations (RCE). An attempted attack requires user authentication. | ||||
| CVE-2020-8599 | 1 Trendmicro | 2 Apex One, Officescan | 2025-10-31 | 9.8 Critical |
| Trend Micro Apex One (2019) and OfficeScan XG server contain a vulnerable EXE file that could allow a remote attacker to write arbitrary data to an arbitrary path on affected installations and bypass ROOT login. Authentication is not required to exploit this vulnerability. | ||||
| CVE-2022-47966 | 1 Zohocorp | 22 Manageengine Access Manager Plus, Manageengine Ad360, Manageengine Adaudit Plus and 19 more | 2025-10-31 | 9.8 Critical |
| Multiple Zoho ManageEngine on-premise products, such as ServiceDesk Plus through 14003, allow remote code execution due to use of Apache Santuario xmlsec (aka XML Security for Java) 1.4.1, because the xmlsec XSLT features, by design in that version, make the application responsible for certain security protections, and the ManageEngine applications did not provide those protections. This affects Access Manager Plus before 4308, Active Directory 360 before 4310, ADAudit Plus before 7081, ADManager Plus before 7162, ADSelfService Plus before 6211, Analytics Plus before 5150, Application Control Plus before 10.1.2220.18, Asset Explorer before 6983, Browser Security Plus before 11.1.2238.6, Device Control Plus before 10.1.2220.18, Endpoint Central before 10.1.2228.11, Endpoint Central MSP before 10.1.2228.11, Endpoint DLP before 10.1.2137.6, Key Manager Plus before 6401, OS Deployer before 1.1.2243.1, PAM 360 before 5713, Password Manager Pro before 12124, Patch Manager Plus before 10.1.2220.18, Remote Access Plus before 10.1.2228.11, Remote Monitoring and Management (RMM) before 10.1.41. ServiceDesk Plus before 14004, ServiceDesk Plus MSP before 13001, SupportCenter Plus before 11026, and Vulnerability Manager Plus before 10.1.2220.18. Exploitation is only possible if SAML SSO has ever been configured for a product (for some products, exploitation requires that SAML SSO is currently active). | ||||
| CVE-2023-29552 | 4 Netapp, Service Location Protocol Project, Suse and 1 more | 5 Smi-s Provider, Service Location Protocol, Linux Enterprise Server and 2 more | 2025-10-31 | 7.5 High |
| The Service Location Protocol (SLP, RFC 2608) allows an unauthenticated, remote attacker to register arbitrary services. This could allow the attacker to use spoofed UDP traffic to conduct a denial-of-service attack with a significant amplification factor. | ||||
| CVE-2023-49103 | 1 Owncloud | 1 Graph Api | 2025-10-31 | 10 Critical |
| An issue was discovered in ownCloud owncloud/graphapi 0.2.x before 0.2.1 and 0.3.x before 0.3.1. The graphapi app relies on a third-party GetPhpInfo.php library that provides a URL. When this URL is accessed, it reveals the configuration details of the PHP environment (phpinfo). This information includes all the environment variables of the webserver. In containerized deployments, these environment variables may include sensitive data such as the ownCloud admin password, mail server credentials, and license key. Simply disabling the graphapi app does not eliminate the vulnerability. Additionally, phpinfo exposes various other potentially sensitive configuration details that could be exploited by an attacker to gather information about the system. Therefore, even if ownCloud is not running in a containerized environment, this vulnerability should still be a cause for concern. Note that Docker containers from before February 2023 are not vulnerable to the credential disclosure. | ||||
| CVE-2020-4005 | 1 Vmware | 2 Cloud Foundation, Esxi | 2025-10-31 | 7.8 High |
| VMware ESXi (7.0 before ESXi70U1b-17168206, 6.7 before ESXi670-202011101-SG, 6.5 before ESXi650-202011301-SG) contains a privilege-escalation vulnerability that exists in the way certain system calls are being managed. A malicious actor with privileges within the VMX process only, may escalate their privileges on the affected system. Successful exploitation of this issue is only possible when chained with another vulnerability (e.g. CVE-2020-4004) | ||||
| CVE-2022-31698 | 1 Vmware | 2 Cloud Foundation, Vcenter Server | 2025-10-31 | 5.3 Medium |
| The vCenter Server contains a denial-of-service vulnerability in the content library service. A malicious actor with network access to port 443 on vCenter Server may exploit this issue to trigger a denial-of-service condition by sending a specially crafted header. | ||||