Export limit exceeded: 425898 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 111318 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (111318 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93801 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: smb/client: zero-initialize stack-allocated cifs_open_info_data Stack-allocated cifs_open_info_data may contain random data. This can make some fields have wrong value if they are not set later. | ||||
| CVE-2026-93221 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: convert nfsd_net boolean flags to unsigned long flags word nfsd_net contains several boolean fields that are accessed from concurrent contexts without serialization. In particular, nfsd4_end_grace() guards its drain path with a plain bool: if (nn->grace_ended) return; nn->grace_ended = true; The read and the write are independent, and nothing in struct nfsd_net serializes them. At least two contexts can reach this code with no lock held: laundromat path laundry_wq kworker nfs4_laundromat() nfsd4_end_grace() RECLAIM_COMPLETE path nfsd compound kthread nfsd4_reclaim_complete() inc_reclaim_complete() nfsd4_end_grace() Both callers can observe grace_ended == false on different CPUs, both store true, and both proceed into nfsd4_record_grace_done(), which invokes the active client_tracking_ops->grace_done callback. For tracking ops that drain reclaim_str_hashtbl (legacy_tracking_ops via nfsd4_recdir_purge_old, and the cld v1+ ops via nfsd4_cld_grace_done), grace_done calls nfs4_release_reclaim(), which walks every bucket of reclaim_str_hashtbl with no lock and calls nfs4_remove_reclaim_record() (list_del + kfree) on each entry. Two concurrent walkers corrupt the list and double-free every nfs4_client_reclaim. A concurrent nfsd4_find_reclaim_client() iterating the same bucket reads through freed memory. A third call site exists in nfs4_state_start_net() on the skip_grace startup path, but it runs under nfsd_mutex before any client has connected and before the laundromat's first delayed work fires, so it cannot race with the two callers above. Replace the scattered boolean fields in nfsd_net with a single unsigned long flags word and an enum nfsd_net_flag for the bit positions. The grace_ended race is fixed by using test_and_set_bit(), which is atomic on all architectures. The remaining flags (grace_end_forced, in_grace, somebody_reclaimed, track_reclaim_completes, nfsd_net_up, lockd_up) are converted to use test_bit/set_bit/clear_bit for consistency. This avoids sub-word cmpxchg issues on architectures like Hexagon that only support word-sized atomic operations. | ||||
| CVE-2026-93148 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject MEM_ALLOC BTF accesses past object bounds BTF struct walks relax the struct-size check for accesses through a trailing flexible array. That is valid for ordinary BTF type walking, but PTR_TO_BTF_ID | MEM_ALLOC values point to objects allocated with the static BTF type size. When walking a MEM_ALLOC object, reject the access before applying the flexible-array relaxation if the access range extends past the struct size. Apply the same policy to struct ID matching so kfunc and kptr type checks do not walk past the allocated object bounds either. | ||||
| CVE-2026-93144 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject writes through untrusted BTF pointers check_ptr_to_btf_access() lets program-type btf_struct_access callbacks validate writes before the default BTF access path rejects non-read accesses. That bypasses the read-only policy for untrusted BTF pointers created by helpers such as bpf_rdonly_cast(). Reject non-read accesses through PTR_UNTRUSTED BTF pointers at the common entry point, before the callback branch to handle all cases. | ||||
| CVE-2026-90427 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Don't fall back to a freed smmu after devm_krealloc() __tegra241_cmdqv_probe() uses devm_krealloc() to grow @smmu into the larger tegra241_cmdqv, which frees the original @smmu once it relocates. A failure after that returned NULL, and the caller then dereferenced the freed @smmu on its fallback path. Return an int and take @smmu by reference instead, then update *smmu to the reallocated pointer after devm_krealloc() succeeds, so the caller and its fallback path both use the live @smmu rather than the freed original. | ||||
| CVE-2026-90408 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix overreads in ath12k_wmi_process_csa_switch_count_event() There is no policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT, so the parse infrastructure does not enforce a minimum length for the event struct. Additionally, the num_vdevs field is taken directly from firmware and used as a loop bound over the vdev_ids array without checking that it fits within the TLV payload. Either condition can cause an out-of-bounds read. Add a TLV policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT so the parse infrastructure enforces a minimum length for the fixed-size event struct. Add a helper ath12k_wmi_tlv_data_len() to recover the payload length of a parsed TLV from the header preceding its data pointer. Use it in ath12k_wmi_process_csa_switch_count_event() to bound num_vdevs before the loop. Compile tested only. | ||||
| CVE-2026-90399 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix stride mismatch in mac_phy_caps_parse() Currently, in ath12k_wmi_mac_phy_caps_parse(), kzalloc() sizes the mac_phy_caps buffer as tot_phy_id * len, where len is clamped to min(firmware_len, sizeof(struct ath12k_wmi_mac_phy_caps_params)). The subsequent memcpy() destination advances by sizeof(full struct) per slot via C pointer arithmetic, not by the clamped len. When firmware sends short TLVs, the second and later slots are written past the end of the allocation. The reader in ath12k_pull_mac_phy_cap_svc_ready_ext() also indexes the buffer with full-struct pointer arithmetic, so the allocation must match that stride. Fix by using kzalloc_objs(), which derives the element size from the pointer type, making allocation size and pointer stride provably consistent regardless of what len the firmware provides. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3 | ||||
| CVE-2026-90367 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: hold dev->mt76.mutex while disabling tx worker in SER mt7996_mac_reset_work() parked the tx worker and disabled the RX/TX NAPIs before taking dev->mt76.mutex. mt76_worker_disable()/_enable() are plain kthread park/unpark, not refcounted, and __mt76_set_channel() toggles the same worker and the MT76_RESET bit under the mutex. An L1 SER racing a channel switch could therefore have the worker unparked and MT76_RESET cleared while the reset path resets the DMA rings, corrupting descriptors or tokens. Take the mutex before disabling the worker, as mt7915 does. | ||||
| CVE-2026-90326 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: fix race between policy activation and blkg destruction When switching an IO scheduler on a block device, blkcg_activate_policy() allocates blkg_policy_data (pd) for all blkgs attached to the queue. However, blkcg_activate_policy() may race with concurrent blkcg deletion, leading to use-after-free and memory leak issues. The use-after-free occurs in the following race: T1 (blkcg_activate_policy): - Successfully allocates pd for blkg1 (loop0->queue, blkcgA) - Fails to allocate pd for blkg2 (loop0->queue, blkcgB) - Enters the enomem rollback path to release blkg1 resources T2 (blkcg deletion): - blkcgA is deleted concurrently - blkg1 is freed via blkg_free_workfn() - blkg1->pd is freed T1 (continued): - Rollback path accesses blkg1->pd->online after pd is freed - Triggers use-after-free In addition, blkg_free_workfn() frees pd before removing the blkg from q->blkg_list. This allows blkcg_activate_policy() to allocate a new pd for a blkg that is being destroyed, leaving the newly allocated pd unreachable when the blkg is finally freed. Fix these races by extending blkcg_mutex coverage to serialize blkcg_activate_policy() rollback and blkg destruction, ensuring pd lifecycle is synchronized with blkg list visibility. | ||||
| CVE-2026-90324 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ublk: check import_ubuf() return value import_ubuf() can fail if the address range (provided by the userspace ublk server) is outside the allowed user address space. Return that 0 bytes were copied if import_ubuf() fails rather than passing an uninitialized struct iov_iter to ublk_copy_user_pages(). | ||||
| CVE-2026-90321 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate inline xattrs during inode block validation Patch series "ocfs2: validate xattr entry bounds", v7. This series validates OCFS2 xattr entry name/value bounds when xattr metadata is read and validated, before getxattr() or listxattr() can walk out-of-range entry arrays or offsets from corrupted metadata. This patch (of 2): ocfs2_validate_inode_block() verifies a dinode before OCFS2 users walk metadata from it, but inline xattr metadata is still checked only in operation-specific consumers. The existing ibody lookup helper validates inline header placement and entry count, but inode block validation does not reject entry name/value bounds. Add a flat xattr entry validator and call it from inode block validation for inline xattrs. Keep the operation paths on their existing header/count lookup checks; the full entry bounds check now runs when the inode block is validated at read time. Reject corrupted inline xattr metadata before ocfs2_xattr_ibody_get() or listxattr() can walk past the inline storage. Validation reproduced this kernel report: BUG: KASAN: use-after-free in ocfs2_xattr_find_entry+0x5a/0x170 Read of size 2 at addr ffff8881242a2000 by task python3/529 Call Trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 kasan_report+0xe0/0x110 ocfs2_xattr_find_entry+0x5a/0x170 ocfs2_xattr_get_nolock+0x20a/0x820 ocfs2_xattr_get+0x10c/0x1e0 __vfs_getxattr+0xe2/0x130 vfs_getxattr+0x185/0x1b0 | ||||
| CVE-2026-90320 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate external xattr entries when reading metadata ocfs2_validate_xattr_block() checks the xattr block header before the block reaches higher-level xattr users, but it does not verify that a non-indexed block's xh_count and entry offsets fit inside the block. Indexed buckets likewise reach list/get consumers after ECC without an entry-bounds check. Use the flat xattr entry validator for non-indexed external xattr blocks, and use a bucket-specific validator for indexed buckets at metadata read time. The bucket validator keeps the entry array bounded by the first bucket block while checking name/value offsets against the bucket block they target. Reject corrupted external xattr metadata before listxattr() or getxattr() can walk out-of-range entry arrays or name/value offsets. Validation reproduced this kernel report: BUG: KASAN: use-after-free in ocfs2_xattr_list_entries+0xd7/0x190 Read of size 1 at addr ffff88810a654007 by task ocfs2_xattr_lis/630 Call Trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 kasan_report+0xe0/0x110 ocfs2_xattr_list_entries+0xd7/0x190 ocfs2_listxattr+0x3f6/0x610 listxattr+0x90/0xe0 path_listxattrat+0xed/0x220 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2026-90291 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: module/dups: Fix use-after-free in kmod_dup_req lifetime handling The kmod dups code uses RCU to ensure that a kmod_dup_req instance is freed only after it is no longer referenced. When releasing an instance, the kmod_dup_request_delete() function removes the kmod_dup_req from the dup_kmod_reqs list, waits via synchronize_rcu() and finally frees it. However, this doesn't work correctly because parallel users referencing the instance in kmod_dup_request_exists_wait() don't enter an RCU read-side critical section. This can result in a use-after-free. The kmod_dup_request_exists_wait() function may need to hold a valid reference to a kmod_dup_req instance across a blocking wait until the corresponding modprobe command completes. This makes it unsuitable for RCU. Fix the issue by changing the lifecycle management of kmod_dup_req to use reference counting. | ||||
| CVE-2026-90260 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: don't clobber the extent buffer when zeroing it out On a zoned filesystem a freed-but-still-dirty tree block is written out as zeros (EXTENT_BUFFER_ZONED_ZEROOUT) only to keep the zone write pointer advancing. btree_csum_one_bio() implemented this by memzeroing the extent buffer's own folios before submission. That destroys the in-memory buffer while it may still be referenced. In particular btrfs_free_tree_block() can run on it afterwards and reads the header to add a delayed reference; once the header has been zeroed it frees bytenr 0 and corrupts the extent tree (the btrfs_header_bytenr(buf) != 0 ASSERT in btrfs_free_tree_block(), or an "unable to find ref" abort). It is flaky and reproduces under fsstress, e.g. generic/461 and generic/013. Write the zeros to disk from the shared zero page instead and leave the extent buffer content untouched, so any later reference - including the delayed reference from btrfs_free_tree_block() - still sees a valid header. end_bbio_meta_write() now clears writeback on the buffer's own folios, as the bio no longer carries them. | ||||
| CVE-2026-90256 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: use proto_lock for l2cap_data to fix l2cap_disconn_ind hci_conn::l2cap_data is accessed without locks in l2cap_disconn_ind via hci_conn_timeout (disc_work) -> hci_proto_disconn_ind -> l2cap_disconn_ind. This is UAF if the l2cap_conn is deleted concurrently. disc_work is disabled sync in hci_conn_del(), so we cannot take hci_dev_lock in disc_work. Fix by using proto_lock to guard l2cap_data, in addition to hdev->lock which is held in other access paths. | ||||
| CVE-2026-90240 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Flush context cache with correct SID when tearing down aliases domain_context_clear_one() and device_pasid_table_teardown() are both invoked once per DMA alias of a device. Each function locates the context entry using the bus/devfn pair provided by the pci_for_each_dma_alias() callback, then calls intel_context_flush_no_pasid(), which constructs a device-selective context-cache invalidation from info->bus and info->devfn (that is, always the requester ID of the device itself). As a result, for every alias other than the device’s own RID, the context entry that was just cleared in memory is never invalidated in the context cache. Hardware may continue using that stale cached entry. In the scalable-mode teardown path, intel_pasid_free_table() can then free the PASID directory still referenced by that stale entry, allowing the IOMMU to walk freed memory. Fix this by passing the source ID of the entry being torn down to intel_context_flush_no_pasid(), instead of deriving it from @info. | ||||
| CVE-2026-90231 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix unconfined user namespace restriction forced stack If a task is already confined by a stack the unprivileged transition restriction on unconfined is not correctly, applied. This results in an escape if two transitions through an unconfined profile can be executed. Fix this by pushing the check into the per profile label build. The check will always be done against unconfined and result in a stack of just the unconfined component when necessary. | ||||
| CVE-2026-90217 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Compare iterator types during state pruning An iterator stack slot can be MEM_RCU or PTR_UNTRUSTED. These states must not be equal, or the verifier can prune an unsafe path. Compare the pointer type for STACK_ITER slots. | ||||
| CVE-2026-90177 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Check pointer type for all atomic RMW paths Atomic RMW verification records an instruction pointer type only when the current destination is PTR_TO_ARENA. A second path can therefore reach the same instruction with an ordinary pointer without comparing it against the saved arena type. The post-verification fixup uses the saved type to rewrite the instruction to BPF_PROBE_ATOMIC for every path. Record the actual destination type for all atomic RMW paths so the existing mismatch check rejects incompatible uses of one instruction. | ||||
| CVE-2026-90142 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: virtio_net: Fix resize of the RX ring When a AF_XDP socket is attached, the virtnet_rx_resize should resize the rq->xsk_buffs XSK buffer array. Otherwise, when the size grows, the virtnet_rx_resume() causes a write past the end of the array. This is easily reproducable with ethtool -G ens3 rx 32 ./xdpsock -i eth0 -q 0 -r -z & ethtool -G eth0 rx 256 | ||||