Export limit exceeded: 423702 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 17105 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (17105 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-120091 | 1 Temporal | 1 Temporal | 2026-11-06 | 8.8 High |
| Temporal Server compiles a Worker Controller Instance module, go.temporal.io/auto-scaled-workers, into its Worker Service, and that module registers a compute provider named k8s whose function is to manage workers running in a Kubernetes cluster. The k8s provider built its Kubernetes client from the client configuration supplied in the caller's request rather than from operator configuration, and building and using that client could run a command of the caller's choosing on the Worker Service host, under the account the server process runs as. Two frontend operations reach the provider. CreateWorkerDeploymentVersion requires a namespace write role. ValidateWorkerDeploymentVersionComputeConfig is registered as a read-only namespace operation, so an authenticated caller holding only a read role in a single namespace can reach the provider through it, and that route does not require a worker deployment to already exist. Execution happens while the submitted configuration is validated, so no scaling decision, task arrival, or unusual request sequence is required. Because the Worker Service process holds the persistence credentials for every namespace in the cluster and the cluster's TLS material, the consequence reaches beyond the caller's namespace to the cluster as a whole. The provider is present in the official temporal-server binaries and container images for the affected releases. The control that keeps it unreachable is the compute provider allowlist, the dynamic configuration setting workercontroller.compute_providers.enabled. On Temporal Server 1.31.0 through 1.31.2 that allowlist does not deny by default: when the setting is unset the check is skipped and every registered compute provider is permitted, k8s included, so a stock deployment of those releases is exposed. On 1.31.3 and later 1.31 releases, and on 1.32.0 and later 1.32 releases, the allowlist denies by default, and a deployment is exposed only where k8s has been added to it. The 1.30 release line does not include the Worker Controller Instance module and is unaffected. To determine whether a deployment is affected, check the following together. The deployed Temporal Server version is in an affected range. The Worker Service is running, which it is in the default service set and therefore in a stock deployment. The effective value of workercontroller.compute_providers.enabled contains k8s, or, on 1.31.0 through 1.31.2 only, is unset; check both the global value and every namespace-constrained override, because an override can add k8s for a single namespace. And authorization is configured, meaning a real authorizer and claim mapper are in place; a deployment running with no authorizer already grants every caller unrestricted access to every namespace, so it has no namespace boundary for this to cross. Deployments that use a custom authorizer should also check whether it permits ValidateWorkerDeploymentVersionComputeConfig to callers without namespace write access. The separate per-namespace dynamic configuration setting workercontroller.enabled does not gate the affected path on any affected release. | ||||
| CVE-2026-80893 | 1 Linux | 1 Linux Kernel | 2026-11-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix swap entry corruption when clearing uffd-wp at fork() copy_hugetlb_page_range() clears the uffd-wp bit of migration and hwpoison entries with huge_pte_clear_uffd_wp(), which operates on the present-PTE bit position. Swap entries keep the uffd-wp state elsewhere -- the migration branch reads and sets it with pte_swp_uffd_wp() and pte_swp_mkuffd_wp() -- and the present-PTE position falls into the swap payload. On x86-64 it lands in the inverted swap offset, where a naturally-aligned hugetlb PFN always has the affected bit set, so the clear advances the encoded PFN by two pages. No userfaultfd needs to be involved: the clear is guarded only by the child VMA not being uffd-wp registered, so a plain fork() with an in-flight hugetlb migration entry (or a poisoned hugetlb page) corrupts the entry copied into the child. Instrumenting the clear and forking after MADV_HWPOISON on a 2MB anon hugetlb page shows: offset before=120e00 offset after =120e02 The fallout is mostly latent: rmap walks match migration entries by folio range and remove_migration_pte() rebuilds the PTE from the folio, so a within-folio PFN skew heals once migration completes. But any path that re-encodes the corrupted offset -- e.g. hugetlb_change_protection() rewriting a writable migration entry via make_readable_migration_entry(swp_offset(entry)) -- propagates it. Migration entries legitimately carry uffd-wp, so clear it with pte_swp_clear_uffd_wp(), matching copy_nonpresent_pte() and move_huge_pte(). A hwpoison entry, on the other hand, never carries the uffd-wp bit: it is installed fresh by make_hwpoison_entry() (try_to_unmap_one() does not preserve uffd-wp on the hwpoison path) and hugetlb_change_protection() leaves hwpoison entries untouched. There was nothing to clear there, only the corruption, so drop the clear entirely. | ||||
| CVE-2026-80844 | 1 Linux | 1 Linux Kernel | 2026-11-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: ah6: validate routing header segments_left AH6 rearranges routing-header addresses before computing or verifying the ICV. ipv6_rearrange_rthdr() assumes that segments_left is not larger than the number of addresses described by the routing header's hdrlen field. That assumption does not hold for raw IPv6 HDRINCL packets. A packet with hdrlen equal to 2 describes one address, but can carry an arbitrary segments_left value. With segments_left equal to 255, the function moves its address pointer 4,064 bytes backwards and passes a 4,064-byte length to memmove(), resulting in an out-of-bounds access. Validate the invariant locally before modifying the routing header or performing any address-pointer arithmetic, and propagate malformed-header errors to the existing AH6 input and output error paths. | ||||
| CVE-2026-68278 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 6.0 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/dp/mst: fix buffer overflows in sideband chunk accumulation drm_dp_sideband_append_payload() has three related bugs when processing device-provided sideband reply data: 1. Zero-length curchunk_len underflow: msg_len is a 6-bit field taken directly from the DP sideband header. If a device sends msg_len=0, curchunk_len is set to zero. The condition (curchunk_idx >= curchunk_len) is immediately true, and curchunk_len-1 wraps to 255 (u8 underflow). drm_dp_msg_data_crc4() reads 255 bytes from chunk[48], then memcpy() writes 255 bytes into msg[], both far out of bounds. 2. chunk[48] overflow: curchunk_len can reach 63 (6-bit field). chunk[] is only 48 bytes. Multi-iteration payload assembly appends 16-byte blocks until curchunk_idx reaches curchunk_len, writing up to 15 bytes past the end of chunk[] into msg[]. 3. msg[256] overflow: each chunk contributes (curchunk_len-1) bytes to msg[]. No check ensures curlen + (curchunk_len-1) stays within msg[256], so the memcpy can spill into adjacent struct fields. All three are reachable from any DP MST device that can forge sideband reply messages on a physical connection. | ||||
| CVE-2026-68187 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: exec: fix unsigned loop counter wrap in transfer_args_to_stack() The stop value is derived from bprm->p >> PAGE_SHIFT. The index variable is an unsigned long. If bprm->p drops below PAGE_SIZE and stop becomes zero the loop condition index >= stop is always true. After the index == 0 iteration the decrement wraps to ULONG_MAX and bprm->page[ULONG_MAX] reads sizeof(void *) bytes in front of the array. The pointer has wrapped to -1. That garbage pointer is then passed to kmap_local_page() and PAGE_SIZE bytes are copied from wherever that lands into the stack of the process being created. And the loop doesn't terminate either... Getting there only requires bprm->p < PAGE_SIZE. On !MMU bprm_set_stack_limit() and bprm_hit_stack_limit() are empty. So the only constraint on how far bprm->p is pushed down is valid_arg_len(), i.e. that each individual string still fits in what is left. bprm->p starts at PAGE_SIZE * MAX_ARG_PAGES - sizeof(void *) so a single argument or environment string of a little over 31 pages leaves it in the first page: Oops - load access fault [#1] CPU: 0 UID: 0 PID: 1 Comm: victim Not tainted 7.2.0-rc4 #1 epc : __memcpy+0xd4/0xf8 ra : transfer_args_to_stack+0xaa/0xae s4 : ffffffffffffffff s2 : 0000000000000000 a1 : ffffffdc98000000 a2 : 0000000000001000 status: 0000000a00001880 badaddr: ffffffdc98000000 cause: 0000000000000005 [<801a5324>] __memcpy+0xd4/0xf8 [<800d5f6a>] load_flat_binary+0x43a/0x65e [<800a2de4>] bprm_execve+0x1d4/0x316 [<800a351a>] do_execveat_common+0x12e/0x138 [<800a3d44>] __riscv_sys_execve+0x38/0x4e Kernel panic - not syncing: Fatal exception in interrupt This is an arcane bug but we should still fix it. Count down from MAX_ARG_PAGES so the loop ends when index reaches stop, stop == 0 included. The iterations performed are unchanged for every other value of stop. Only CONFIG_MMU=n builds are affected, transfer_args_to_stack() is used by binfmt_flat and binfmt_elf_fdpic on nommu only. The loop predates git history. commit 7e7ec6a93434 ("elf_fdpic_transfer_args_to_stack(): make it generic") only moved it from binfmt_elf_fdpic.c into fs/exec.c and narrowed the copy to the used part of the first page. The condition and the decrement are unchanged from 2.6.12-rc2. | ||||
| CVE-2026-53206 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Add bounds check for firmware runtime memory Validate that the firmware runtime memory specified in the image header is properly aligned and sized to hold the firmware image. This prevents errors during memory allocation and image transfer. | ||||
| CVE-2026-116247 | 1 Pgadmin | 1 Pgadmin 4 | 2026-11-06 | 8.2 High |
| When a server in pgAdmin 4 had no password file, client certificate or client key configured, or the configured one could not be found, pgAdmin left the parameter out of the connection and libpq fell back to the defaults of the operating-system account running pgAdmin: ~/.pgpass, ~/.postgresql/postgresql.crt and postgresql.key, or PGPASSFILE, PGSSLCERT and PGSSLKEY. In server mode any user could therefore connect to a server with the service account's saved passwords or client certificate, and supplying only a copy of its public certificate was enough for libpq to pair it with the service account's private key. A pg_service.conf entry, or a maintenance database name read as a connection string by pg_dumpall, could bring the same files back for the utilities. The fix gives each of these parameters a value in server mode, the user's own file or otherwise a path that can never be opened, in the connection string, in the environment of the utilities and in the --dbname connection string that ranks above a service entry. Desktop mode is unchanged. This issue affects pgAdmin 4: before 9.19. | ||||
| CVE-2026-116244 | 1 Pgadmin | 1 Pgadmin 4 | 2026-11-06 | 8.2 High |
| When a pgAdmin 4 connection was not meant to use a Kerberos user's delegated credentials, pgAdmin removed KRB5CCNAME from its environment, so the Kerberos library fell back to the default credential cache, or a client keytab, of the operating-system account running pgAdmin. libpq then answered any server that asked for GSSAPI authentication with that account's ticket, whatever user name the pgAdmin user gave, so in server mode any user could connect as the service account's Kerberos principal; gssencmode=disable did not prevent it. On Windows, SSPI used the service account's logon in the same way. psql was also started with pgAdmin's environment, which could hold another user's credential cache while that user was connecting. The fix points KRB5CCNAME and KRB5_CLIENT_KTNAME at a file that cannot exist except while a Kerberos-authenticated user connects with Kerberos, and gives every other connection, psql and the utilities require_auth=!gss,!sspi and gssencmode=disable, checked on the final connection string. require_auth needs libpq 16 or later. This issue affects pgAdmin 4: before 9.19. | ||||
| CVE-2026-116242 | 1 Pgadmin | 1 Pgadmin 4 | 2026-11-06 | 8.2 High |
| pgAdmin 4 opens SSH tunnels with the sshtunnel library but gave it neither host_pkey_directories nor ssh_config_file, so it always loaded the unencrypted private keys in ~/.ssh of the operating-system account running pgAdmin, read that account's ~/.ssh/config (IdentityFile, User, HostName, ProxyCommand) for the tunnel host, and could use its ssh-agent. In server mode any user could therefore configure a tunnel to a host that accepts the service account's key, with no credentials of their own or with an identity file that did not exist in their storage, and reach it as that account. The fix makes tunnels in server mode use only the identity file or password the user configured: the service account's keys, configuration and agent are no longer used, and an identity file that cannot be found in the user's storage is reported instead of falling back to ~/.ssh. Desktop mode is unchanged. This issue affects pgAdmin 4: before 9.19. | ||||
| CVE-2026-116241 | 1 Pgadmin | 1 Pgadmin 4 | 2026-11-06 | 9.9 Critical |
| pgAdmin 4's Import/Export Data tool wraps a user's query export in a psql \copy (...) TO command and checks that the query's parentheses are balanced so that nothing can escape the wrapper. The check rejected a backslash inside a single-quoted string, but not inside a double-quoted identifier, where it treated the next double quote as closing the identifier. psql's \copy parser applies the connection's escape character to whichever quote opened a token, so with standard_conforming_strings off a backslash-escaped double quote does not close the identifier. pgAdmin's and psql's view of the quoting then diverged, a closing parenthesis hidden from the check ended the \copy (...) wrapper, and a following TO PROGRAM clause was executed by psql on the pgAdmin host, as the operating-system account running pgAdmin, before the server rejected the statement. An ordinary database role can turn standard_conforming_strings off for itself, and the Import/Export Data permission is granted to non-administrators by default. This is a bypass of the fix for CVE-2026-17566. The fix rejects any backslash inside a double-quoted identifier, as was already done for single-quoted strings, since its meaning depends on a server setting that cannot be known reliably when the query is validated. This issue affects pgAdmin 4: before 9.19. | ||||
| CVE-2026-58865 | 1 Google | 1 Android | 2026-11-06 | 7.5 High |
| In multiple functions of PduParser.java, there is a possible persistent denial of service due to a missing bounds check. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. | ||||
| CVE-2026-58815 | 1 Google | 1 Android | 2026-11-06 | 7.8 High |
| In multiple locations, there is a possible out of bounds write due to an incorrect bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. | ||||
| CVE-2026-43024 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: reject immediate NF_QUEUE verdict nft_queue is always used from userspace nftables to deliver the NF_QUEUE verdict. Immediately emitting an NF_QUEUE verdict is never used by the userspace nft tools, so reject immediate NF_QUEUE verdicts. The arp family does not provide queue support, but such an immediate verdict is still reachable. Globally reject NF_QUEUE immediate verdicts to address this issue. | ||||
| CVE-2026-78192 | 1 Perl | 1 Webdyne | 2026-11-06 | 7.5 High |
| WebDyne versions from 2.022 before 3.022 for Perl disclose application source to unauthenticated clients via the viewer in the default index page. WebDyne's wrapper scripts, such as webdyne.psgi, enable the built-in index page by default. Its source viewer returns files under the document root named in the source parameter of an HTMX request, including .psp, .pm and .pl files. A remote attacker can read the application's Perl code, including the __PERL__ blocks of .psp pages and any credentials they hold. | ||||
| CVE-2026-83559 | 1 Apache | 1 Wicket | 2026-11-06 | N/A |
| Improper encoding or escaping of output in Apache Wicket. org.apache.wicket.core.util.string.JavaScriptUtils#escapeQuotes() replaces each single quote in its input with a backslash and a single quote, and each double quote with a backslash and a double quote, so that the value can be placed inside a JavaScript string literal. It does not escape the backslash, which is the character that has to be escaped, and escaped first, for the rest of that escaping to hold. A value that already holds a backslash immediately before a quote therefore ends up with two backslashes in front of that quote: the first escapes the second, the quote itself is left unescaped, and it closes the literal. Whatever the value carries after that point is no longer text but JavaScript, and it runs in the application's origin and in the session of the user looking at the page. The method is public, is not deprecated, and its documentation states that its result can be part of a JavaScript call such as an alert; the only limitation it notes concerns JSON values, which need different escaping. An application is affected wherever it calls the method itself and places the result inside a JavaScript string literal, from its own code or from a component of its own or of a third party, and the value it escapes holds data an attacker can influence. There is no further condition, and no component of Wicket has to be involved: the application is using the method for what its documentation offers, and the method does not deliver it. Two components shipped with Wicket Extensions pass a value through the method. org.apache.wicket.extensions.ajax.markup.html.AjaxEditableLabel writes the editor's first error feedback message into a single-quoted JavaScript string literal in the Ajax response, so an application is affected through that component where the message shown for a failed edit holds data an attacker can influence, whether that is the submitted value itself or another variable the application sets on the validation error. A validation message can carry the submitted value, because input is a message variable that every form component supplies for its own validation errors, and the documentation shows overriding a validator's message to include it; none of the message bundles shipped with Wicket interpolates it, so an application that has not written such a message is not affected through this component. org.apache.wicket.extensions.ajax.markup.html.repeater.AjaxListPanel passes the serialized markup tag of an appended component through the method and is not affected: the tag comes from the panel's own markup file, and a quote in any of its attribute values, the component's markup id included, is written as a character reference by the tag serialization and cannot close the literal. This issue affects Apache Wicket: from 8.0.0 through 8.19.0, from 9.0.0 through 9.24.0, from 10.0.0 through 10.11.0. Users of Apache Wicket 7.x or older, which are no longer supported, should upgrade to a supported version. Users are recommended to upgrade to version 8.20.0, 9.25.0 or 10.12.0, which fix the issue. | ||||
| CVE-2026-122266 | 1 Aws | 2 Amazon-vpc-cni-k8s, Aws-network-policy-agent | 2026-11-06 | 8.7 High |
| Improper isolation of shared resources in aws-network-policy-agent in Amazon EKS Network Policy Agent before 1.3.7 (VPC CNI before 1.22.3) might allow an authenticated adjacent user to bypass NetworkPolicy ingress enforcement on co-located pods via eBPF conntrack map poisoning using crafted AF_PACKET frames. To remediate this issue, users should upgrade to Amazon VPC CNI Managed Add-on v1.22.3 or later (which includes Network Policy Agent v1.3.7). | ||||
| CVE-2026-123268 | 1 Libyal | 1 Libvmdk | 2026-11-05 | 3.5 Low |
| A security vulnerability has been detected in libyal libvmdk up to 3fdd7839758e9f44ef95e1dfccde8552b860a4fc. Affected is the function libvmdk_extent_table_get_extent_data_file_path of the file libvmdk/libvmdk_extent_table.c of the component Extent Data File Handler. The manipulation leads to memory corruption. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. This product uses a rolling release model to deliver continuous updates. As a result, specific version information for affected or updated releases is not available. The identifier of the patch is 175d3fc0a0b961f362f16e7560a6169d7213e16b. Applying a patch is the recommended action to fix this issue. | ||||
| CVE-2026-110952 | 1 Apache | 1 Kafka | 2026-11-05 | 5.9 Medium |
| A Kafka broker that authenticates clients with SASL/OAUTHBEARER using the bundled JWKS-backed validator always verifies the JWT signature, but two further checks are only performed when explicitly configured: - The issuer (iss) claim is verified only when sasl.oauthbearer.expected.issuer is set. When it is unset, a validly-signed token carrying the expected audience is accepted regardless of which issuer minted it. - An audience (aud) claim is required only when sasl.oauthbearer.expected.audience is set. When it is unset, a validly-signed token that omits the aud claim is accepted. (A token that carries an aud claim is still rejected when no expected audience is configured.) Both options default to unset and have been documented as optional (Importance LOW) since KIP-768 (3.1.0). Impact: The exposure is realizable mainly in deployments whose JWKS endpoint serves signing keys for more than one issuer (a multi-tenant identity provider, an aggregated/shared JWKS, or shared signing keys): a token minted for a different issuer, or a token lacking an audience, may be accepted to authenticate — potentially as a higher-privileged principal. In a single-issuer deployment where the provider controls the iss claim and issues audience-scoped tokens, exposure is limited. The signature trust anchor remains enforced in all cases. This is distinct from CVE-2026-33557 (acceptance of unsigned/unvalidated tokens); here the signature is validated and only the issuer/audience checks are not enforced by default. Mitigation (all affected versions, no upgrade required): Set both sasl.oauthbearer.expected.issuer (to your provider's exact iss value) and sasl.oauthbearer.expected.audience (to the audience(s) your brokers expect), per listener. Brokers that set these perform exact-match issuer/audience checks and are not affected. Both have been available since 3.1.0. Resolution: - From Apache Kafka 4.4.0: a broker configured with a JWKS endpoint fails to start unless both sasl.oauthbearer.expected.issuer and sasl.oauthbearer.expected.audience are set (secure by default). Deployments that intentionally do not restrict the issuer and/or audience may opt out per axis with sasl.oauthbearer.allow.unverified.issuer=true and/or sasl.oauthbearer.allow.unverified.audience=true. | ||||
| CVE-2026-23241 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: audit: add missing syscalls to read class The "at" variant of getxattr() and listxattr() are missing from the audit read class. Calling getxattrat() or listxattrat() on a file to read its extended attributes will bypass audit rules such as: -w /tmp/test -p rwa -k test_rwa The current patch adds missing syscalls to the audit read class. | ||||
| CVE-2026-23140 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf, test_run: Subtract size of xdp_frame from allowed metadata size The xdp_frame structure takes up part of the XDP frame headroom, limiting the size of the metadata. However, in bpf_test_run, we don't take this into account, which makes it possible for userspace to supply a metadata size that is too large (taking up the entire headroom). If userspace supplies such a large metadata size in live packet mode, the xdp_update_frame_from_buff() call in xdp_test_run_init_page() call will fail, after which packet transmission proceeds with an uninitialised frame structure, leading to the usual Bad Stuff. The commit in the Fixes tag fixed a related bug where the second check in xdp_update_frame_from_buff() could fail, but did not add any additional constraints on the metadata size. Complete the fix by adding an additional check on the metadata size. Reorder the checks slightly to make the logic clearer and add a comment. | ||||