Export limit exceeded: 111340 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (111340 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64003 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: core: Run queues for all non-SDEV_DEL devices from scsi_run_host_queues While a SCSI host is in a recovery state, scsi_mq_requeue_cmd() will not set the requeue list for a requeued command to be kicked in the future. The expectation is a call to scsi_run_host_queues() will kick all SCSI devices once the recovery state is cleared. However, scsi_run_host_queues() uses shost_for_each_device() which uses scsi_device_get() and so will ignore devices in a partially removed state like SDEV_CANCEL. But these devices may also have requeued requests, leaving their requests stuck from not being kicked and causing the removal process of the device to hang. scsi_run_host_queues() needs to run against more devices than the macro shost_for_each_device() allows. Instead of using the too limiting scsi_device_get() state checks, only ignore devices in SDEV_DEL state or when unable to acquire a reference. Attempt to run the queues for all other devices when scsi_run_host_queues() is called. | ||||
| CVE-2026-112287 | 1 Krayin | 1 Laravel-crm | 2026-10-19 | 7.1 High |
| Krayin CRM before 2.2.7 contains a broken object level authorization vulnerability in EmailController write actions that allows scope-restricted authenticated users to manipulate other users' emails by supplying their numeric IDs. Attackers can call update, destroy, mass-update or mass-destroy endpoints to edit, re-send via is_draft=0, trash or permanently delete emails and disclose their subject, body and linked lead and person data. | ||||
| CVE-2026-111853 | 1 Tektronix | 1 3 Series Mdo | 2026-10-19 | 8.8 High |
| An issue was discovered on Tektronix 3 Series MDO devices before 1.21.1. An OS command injection vulnerability exists in the FILESystem:MOUNT:DRIve SCPI command handler. Insufficient neutralization of user-supplied input allows remote attackers to execute arbitrary operating system commands with elevated privileges. | ||||
| CVE-2026-112366 | 2 Jonschlinkert, Micromatch | 2 Picomatch, Picomatch | 2026-10-19 | 7.5 High |
| Picomatch through 4.0.7 contains a regular expression denial of service vulnerability that allows attackers to block the event loop by supplying single-branch repeated extglob patterns. Attackers can provide globs like +(*) or +(*a), which analyzeRepeatedExtglob in lib/parse.js skips, causing exponential backtracking against short crafted strings and denying service to Node.js applications. | ||||
| CVE-2026-111759 | 1 Markdown-it | 1 Markdown-it | 2026-10-19 | 7.5 High |
| markdown-it is a Markdown parser. Prior to 14.3.2 and 15.0.2, when typographer: true is enabled, specially crafted Markdown can cause quadratic processing time in the smartquotes rule, potentially leading to denial of service in applications processing untrusted input. Many opening double quotes followed by unmatched closing single quotes cause repeated scans of the entire opener stack. The same issue occurs with the quote types reversed. The default configuration (typographer: false) is not affected, but this option is enabled with high probability. This issue is fixed in versions 14.3.2 and 15.0.2. | ||||
| CVE-2025-40053 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: dlink: handle copy_thresh allocation failure The driver did not handle failure of `netdev_alloc_skb_ip_align()`. If the allocation failed, dereferencing `skb->protocol` could lead to a NULL pointer dereference. This patch tries to allocate `skb`. If the allocation fails, it falls back to the normal path. Tested-on: D-Link DGE-550T Rev-A3 | ||||
| CVE-2025-40048 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: uio_hv_generic: Let userspace take care of interrupt mask Remove the logic to set interrupt mask by default in uio_hv_generic driver as the interrupt mask value is supposed to be controlled completely by the user space. If the mask bit gets changed by the driver, concurrently with user mode operating on the ring, the mask bit may be set when it is supposed to be clear, and the user-mode driver will miss an interrupt which will cause a hang. For eg- when the driver sets inbound ring buffer interrupt mask to 1, the host does not interrupt the guest on the UIO VMBus channel. However, setting the mask does not prevent the host from putting a message in the inbound ring buffer. So let’s assume that happens, the host puts a message into the ring buffer but does not interrupt. Subsequently, the user space code in the guest sets the inbound ring buffer interrupt mask to 0, saying “Hey, I’m ready for interrupts”. User space code then calls pread() to wait for an interrupt. Then one of two things happens: * The host never sends another message. So the pread() waits forever. * The host does send another message. But because there’s already a message in the ring buffer, it doesn’t generate an interrupt. This is the correct behavior, because the host should only send an interrupt when the inbound ring buffer transitions from empty to not-empty. Adding an additional message to a ring buffer that is not empty is not supposed to generate an interrupt on the guest. Since the guest is waiting in pread() and not removing messages from the ring buffer, the pread() waits forever. This could be easily reproduced in hv_fcopy_uio_daemon if we delay setting interrupt mask to 0. Similarly if hv_uio_channel_cb() sets the interrupt_mask to 1, there’s a race condition. Once user space empties the inbound ring buffer, but before user space sets interrupt_mask to 0, the host could put another message in the ring buffer but it wouldn’t interrupt. Then the next pread() would hang. Fix these by removing all instances where interrupt_mask is changed, while keeping the one in set_event() unchanged to enable userspace control the interrupt mask by writing 0/1 to /dev/uioX. | ||||
| CVE-2025-39857 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: fix one NULL pointer dereference in smc_ib_is_sg_need_sync() BUG: kernel NULL pointer dereference, address: 00000000000002ec PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 28 UID: 0 PID: 343 Comm: kworker/28:1 Kdump: loaded Tainted: G OE 6.17.0-rc2+ #9 NONE Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 Workqueue: smc_hs_wq smc_listen_work [smc] RIP: 0010:smc_ib_is_sg_need_sync+0x9e/0xd0 [smc] ... Call Trace: <TASK> smcr_buf_map_link+0x211/0x2a0 [smc] __smc_buf_create+0x522/0x970 [smc] smc_buf_create+0x3a/0x110 [smc] smc_find_rdma_v2_device_serv+0x18f/0x240 [smc] ? smc_vlan_by_tcpsk+0x7e/0xe0 [smc] smc_listen_find_device+0x1dd/0x2b0 [smc] smc_listen_work+0x30f/0x580 [smc] process_one_work+0x18c/0x340 worker_thread+0x242/0x360 kthread+0xe7/0x220 ret_from_fork+0x13a/0x160 ret_from_fork_asm+0x1a/0x30 </TASK> If the software RoCE device is used, ibdev->dma_device is a null pointer. As a result, the problem occurs. Null pointer detection is added to prevent problems. | ||||
| CVE-2025-39855 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix NULL access of tx->in_use in ice_ptp_ts_irq The E810 device has support for a "low latency" firmware interface to access and read the Tx timestamps. This interface does not use the standard Tx timestamp logic, due to the latency overhead of proxying sideband command requests over the firmware AdminQ. The logic still makes use of the Tx timestamp tracking structure, ice_ptp_tx, as it uses the same "ready" bitmap to track which Tx timestamps complete. Unfortunately, the ice_ptp_ts_irq() function does not check if the tracker is initialized before its first access. This results in NULL dereference or use-after-free bugs similar to the following: [245977.278756] BUG: kernel NULL pointer dereference, address: 0000000000000000 [245977.278774] RIP: 0010:_find_first_bit+0x19/0x40 [245977.278796] Call Trace: [245977.278809] ? ice_misc_intr+0x364/0x380 [ice] This can occur if a Tx timestamp interrupt races with the driver reset logic. Fix this by only checking the in_use bitmap (and other fields) if the tracker is marked as initialized. The reset flow will clear the init field under lock before it tears the tracker down, thus preventing any use-after-free or NULL access. | ||||
| CVE-2025-39792 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dm: Always split write BIOs to zoned device limits Any zoned DM target that requires zone append emulation will use the block layer zone write plugging. In such case, DM target drivers must not split BIOs using dm_accept_partial_bio() as doing so can potentially lead to deadlocks with queue freeze operations. Regular write operations used to emulate zone append operations also cannot be split by the target driver as that would result in an invalid writen sector value return using the BIO sector. In order for zoned DM target drivers to avoid such incorrect BIO splitting, we must ensure that large BIOs are split before being passed to the map() function of the target, thus guaranteeing that the limits for the mapped device are not exceeded. dm-crypt and dm-flakey are the only target drivers supporting zoned devices and using dm_accept_partial_bio(). In the case of dm-crypt, this function is used to split BIOs to the internal max_write_size limit (which will be suppressed in a different patch). However, since crypt_alloc_buffer() uses a bioset allowing only up to BIO_MAX_VECS (256) vectors in a BIO. The dm-crypt device max_segments limit, which is not set and so default to BLK_MAX_SEGMENTS (128), must thus be respected and write BIOs split accordingly. In the case of dm-flakey, since zone append emulation is not required, the block layer zone write plugging is not used and no splitting of BIOs required. Modify the function dm_zone_bio_needs_split() to use the block layer helper function bio_needs_zone_write_plugging() to force a call to bio_split_to_limits() in dm_split_and_process_bio(). This allows DM target drivers to avoid using dm_accept_partial_bio() for write operations on zoned DM devices. | ||||
| CVE-2025-40018 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: Defer ip_vs_ftp unregister during netns cleanup On the netns cleanup path, __ip_vs_ftp_exit() may unregister ip_vs_ftp before connections with valid cp->app pointers are flushed, leading to a use-after-free. Fix this by introducing a global `exiting_module` flag, set to true in ip_vs_ftp_exit() before unregistering the pernet subsystem. In __ip_vs_ftp_exit(), skip ip_vs_ftp unregister if called during netns cleanup (when exiting_module is false) and defer it to __ip_vs_cleanup_batch(), which unregisters all apps after all connections are flushed. If called during module exit, unregister ip_vs_ftp immediately. | ||||
| CVE-2025-39798 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-19 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: NFS: Fix the setting of capabilities when automounting a new filesystem Capabilities cannot be inherited when we cross into a new filesystem. They need to be reset to the minimal defaults, and then probed for again. | ||||
| CVE-2025-39860 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-19 | 8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix use-after-free in l2cap_sock_cleanup_listen() syzbot reported the splat below without a repro. In the splat, a single thread calling bt_accept_dequeue() freed sk and touched it after that. The root cause would be the racy l2cap_sock_cleanup_listen() call added by the cited commit. bt_accept_dequeue() is called under lock_sock() except for l2cap_sock_release(). Two threads could see the same socket during the list iteration in bt_accept_dequeue(): CPU1 CPU2 (close()) ---- ---- sock_hold(sk) sock_hold(sk); lock_sock(sk) <-- block close() sock_put(sk) bt_accept_unlink(sk) sock_put(sk) <-- refcnt by bt_accept_enqueue() release_sock(sk) lock_sock(sk) sock_put(sk) bt_accept_unlink(sk) sock_put(sk) <-- last refcnt bt_accept_unlink(sk) <-- UAF Depending on the timing, the other thread could show up in the "Freed by task" part. Let's call l2cap_sock_cleanup_listen() under lock_sock() in l2cap_sock_release(). [0]: BUG: KASAN: slab-use-after-free in debug_spin_lock_before kernel/locking/spinlock_debug.c:86 [inline] BUG: KASAN: slab-use-after-free in do_raw_spin_lock+0x26f/0x2b0 kernel/locking/spinlock_debug.c:115 Read of size 4 at addr ffff88803b7eb1c4 by task syz.5.3276/16995 CPU: 3 UID: 0 PID: 16995 Comm: syz.5.3276 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xcd/0x630 mm/kasan/report.c:482 kasan_report+0xe0/0x110 mm/kasan/report.c:595 debug_spin_lock_before kernel/locking/spinlock_debug.c:86 [inline] do_raw_spin_lock+0x26f/0x2b0 kernel/locking/spinlock_debug.c:115 spin_lock_bh include/linux/spinlock.h:356 [inline] release_sock+0x21/0x220 net/core/sock.c:3746 bt_accept_dequeue+0x505/0x600 net/bluetooth/af_bluetooth.c:312 l2cap_sock_cleanup_listen+0x5c/0x2a0 net/bluetooth/l2cap_sock.c:1451 l2cap_sock_release+0x5c/0x210 net/bluetooth/l2cap_sock.c:1425 __sock_release+0xb3/0x270 net/socket.c:649 sock_close+0x1c/0x30 net/socket.c:1439 __fput+0x3ff/0xb70 fs/file_table.c:468 task_work_run+0x14d/0x240 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop+0xeb/0x110 kernel/entry/common.c:43 exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:175 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:210 [inline] do_syscall_64+0x3f6/0x4c0 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f2accf8ebe9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffdb6cb1378 EFLAGS: 00000246 ORIG_RAX: 00000000000001b4 RAX: 0000000000000000 RBX: 00000000000426fb RCX: 00007f2accf8ebe9 RDX: 0000000000000000 RSI: 000000000000001e RDI: 0000000000000003 RBP: 00007f2acd1b7da0 R08: 0000000000000001 R09: 00000012b6cb166f R10: 0000001b30e20000 R11: 0000000000000246 R12: 00007f2acd1b609c R13: 00007f2acd1b6090 R14: ffffffffffffffff R15: 00007ffdb6cb1490 </TASK> Allocated by task 5326: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:388 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:405 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4365 [inline] __kmalloc_nopro ---truncated--- | ||||
| CVE-2025-40061 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix race in do_task() when draining When do_task() exhausts its iteration budget (!ret), it sets the state to TASK_STATE_IDLE to reschedule, without a secondary check on the current task->state. This can overwrite the TASK_STATE_DRAINING state set by a concurrent call to rxe_cleanup_task() or rxe_disable_task(). While state changes are protected by a spinlock, both rxe_cleanup_task() and rxe_disable_task() release the lock while waiting for the task to finish draining in the while(!is_done(task)) loop. The race occurs if do_task() hits its iteration limit and acquires the lock in this window. The cleanup logic may then proceed while the task incorrectly reschedules itself, leading to a potential use-after-free. This bug was introduced during the migration from tasklets to workqueues, where the special handling for the draining case was lost. Fix this by restoring the original pre-migration behavior. If the state is TASK_STATE_DRAINING when iterations are exhausted, set cont to 1 to force a new loop iteration. This allows the task to finish its work, so that a subsequent iteration can reach the switch statement and correctly transition the state to TASK_STATE_DRAINED, stopping the task as intended. | ||||
| CVE-2025-39961 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd/pgtbl: Fix possible race while increase page table level The AMD IOMMU host page table implementation supports dynamic page table levels (up to 6 levels), starting with a 3-level configuration that expands based on IOVA address. The kernel maintains a root pointer and current page table level to enable proper page table walks in alloc_pte()/fetch_pte() operations. The IOMMU IOVA allocator initially starts with 32-bit address and onces its exhuasted it switches to 64-bit address (max address is determined based on IOMMU and device DMA capability). To support larger IOVA, AMD IOMMU driver increases page table level. But in unmap path (iommu_v1_unmap_pages()), fetch_pte() reads pgtable->[root/mode] without lock. So its possible that in exteme corner case, when increase_address_space() is updating pgtable->[root/mode], fetch_pte() reads wrong page table level (pgtable->mode). It does compare the value with level encoded in page table and returns NULL. This will result is iommu_unmap ops to fail and upper layer may retry/log WARN_ON. CPU 0 CPU 1 ------ ------ map pages unmap pages alloc_pte() -> increase_address_space() iommu_v1_unmap_pages() -> fetch_pte() pgtable->root = pte (new root value) READ pgtable->[mode/root] Reads new root, old mode Updates mode (pgtable->mode += 1) Since Page table level updates are infrequent and already synchronized with a spinlock, implement seqcount to enable lock-free read operations on the read path. | ||||
| CVE-2025-40159 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xsk: Harden userspace-supplied xdp_desc validation Turned out certain clearly invalid values passed in xdp_desc from userspace can pass xp_{,un}aligned_validate_desc() and then lead to UBs or just invalid frames to be queued for xmit. desc->len close to ``U32_MAX`` with a non-zero pool->tx_metadata_len can cause positive integer overflow and wraparound, the same way low enough desc->addr with a non-zero pool->tx_metadata_len can cause negative integer overflow. Both scenarios can then pass the validation successfully. This doesn't happen with valid XSk applications, but can be used to perform attacks. Always promote desc->len to ``u64`` first to exclude positive overflows of it. Use explicit check_{add,sub}_overflow() when validating desc->addr (which is ``u64`` already). bloat-o-meter reports a little growth of the code size: add/remove: 0/0 grow/shrink: 2/1 up/down: 60/-16 (44) Function old new delta xskq_cons_peek_desc 299 330 +31 xsk_tx_peek_release_desc_batch 973 1002 +29 xsk_generic_xmit 3148 3132 -16 but hopefully this doesn't hurt the performance much. | ||||
| CVE-2025-39963 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: io_uring: fix incorrect io_kiocb reference in io_link_skb In io_link_skb function, there is a bug where prev_notif is incorrectly assigned using 'nd' instead of 'prev_nd'. This causes the context validation check to compare the current notification with itself instead of comparing it with the previous notification. Fix by using the correct prev_nd parameter when obtaining prev_notif. | ||||
| CVE-2025-40183 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix metadata_dst leak __bpf_redirect_neigh_v{4,6} Cilium has a BPF egress gateway feature which forces outgoing K8s Pod traffic to pass through dedicated egress gateways which then SNAT the traffic in order to interact with stable IPs outside the cluster. The traffic is directed to the gateway via vxlan tunnel in collect md mode. A recent BPF change utilized the bpf_redirect_neigh() helper to forward packets after the arrival and decap on vxlan, which turned out over time that the kmalloc-256 slab usage in kernel was ever-increasing. The issue was that vxlan allocates the metadata_dst object and attaches it through a fake dst entry to the skb. The latter was never released though given bpf_redirect_neigh() was merely setting the new dst entry via skb_dst_set() without dropping an existing one first. | ||||
| CVE-2025-39902 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/slub: avoid accessing metadata when pointer is invalid in object_err() object_err() reports details of an object for further debugging, such as the freelist pointer, redzone, etc. However, if the pointer is invalid, attempting to access object metadata can lead to a crash since it does not point to a valid object. One known path to the crash is when alloc_consistency_checks() determines the pointer to the allocated object is invalid because of a freelist corruption, and calls object_err() to report it. The debug code should report and handle the corruption gracefully and not crash in the process. In case the pointer is NULL or check_valid_pointer() returns false for the pointer, only print the pointer value and skip accessing metadata. | ||||
| CVE-2025-40206 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_objref: validate objref and objrefmap expressions Referencing a synproxy stateful object from OUTPUT hook causes kernel crash due to infinite recursive calls: BUG: TASK stack guard page was hit at 000000008bda5b8c (stack is 000000003ab1c4a5..00000000494d8b12) [...] Call Trace: __find_rr_leaf+0x99/0x230 fib6_table_lookup+0x13b/0x2d0 ip6_pol_route+0xa4/0x400 fib6_rule_lookup+0x156/0x240 ip6_route_output_flags+0xc6/0x150 __nf_ip6_route+0x23/0x50 synproxy_send_tcp_ipv6+0x106/0x200 synproxy_send_client_synack_ipv6+0x1aa/0x1f0 nft_synproxy_do_eval+0x263/0x310 nft_do_chain+0x5a8/0x5f0 [nf_tables nft_do_chain_inet+0x98/0x110 nf_hook_slow+0x43/0xc0 __ip6_local_out+0xf0/0x170 ip6_local_out+0x17/0x70 synproxy_send_tcp_ipv6+0x1a2/0x200 synproxy_send_client_synack_ipv6+0x1aa/0x1f0 [...] Implement objref and objrefmap expression validate functions. Currently, only NFT_OBJECT_SYNPROXY object type requires validation. This will also handle a jump to a chain using a synproxy object from the OUTPUT hook. Now when trying to reference a synproxy object in the OUTPUT hook, nft will produce the following error: synproxy_crash.nft: Error: Could not process rule: Operation not supported synproxy name mysynproxy ^^^^^^^^^^^^^^^^^^^^^^^^ | ||||