Export limit exceeded: 428607 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Export limit exceeded: 428607 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (428607 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-53424 2 Dropbox, Handnot2 2 Samly, Samly 2026-11-19 N/A
Authentication Bypass by Capture-replay vulnerability in dropbox samly allows an attacker to authenticate as the subject of a captured SAML assertion by resubmitting it. Samly.Helper.decode_idp_auth_resp/3 in lib/samly/helper.ex calls esaml_sp:validate_assertion/2, whose default duplicate detector is a no-op. The /3 arity accepting a DuplicateFun exists in esaml and implements the check, but Samly never calls it and offers no configuration to supply one, so the SAML 2.0 Web Browser SSO Profile requirement that a bearer assertion be used once is unenforced. An attacker holding a valid SAMLResponse obtained from the network, from browser history, or from logs can submit the identical bytes repeatedly until the assertion's NotOnOrAfter passes, each time establishing a session as the assertion's subject. This issue affects samly: from 0.3.0 onward.
CVE-2026-74836 1 Mtrudel 1 Bandit 2026-11-19 N/A
Allocation of Resources Without Limits or Throttling vulnerability in mtrudel bandit allows an unauthenticated remote attacker to pin an unbounded number of HTTP/2 stream processes indefinitely via connection-level flow control. When a stream's response body outruns the HTTP/2 connection-level send window (default 65,535 bytes, shared across all streams on the connection), Bandit.HTTP2.Connection queues the remaining bytes and a reply closure in pending_sends and the stream process blocks forever inside a synchronous call to the connection process. Nothing bounds that wait and nothing purges the queue: a client RST_STREAM for the blocked stream is delivered to its mailbox but never read while it is stuck inside the call, so cancelling frees nothing, and periodic PING frames keep the transport-level read timeout from ever firing. The equivalent block on the stream-level send window is already bounded at 15 seconds; the connection-level path had no such bound. Each stalled stream pins its process, Plug state, and any resource the Plug holds across the blocked write, such as a pooled upstream connection in a reverse-proxy Plug. The attacker chooses any endpoint whose response exceeds the connection window (common for most non-trivial payloads), grants a generous stream-level window so only the connection window limits it, and keeps the connection alive with periodic PINGs; the primitive is repeatable across streams and connections at the cost of one idle socket each. This issue affects bandit: from 0.3.4 before 1.12.5.
CVE-2026-75484 1 Mtrudel 1 Bandit 2026-11-19 N/A
Improper Neutralization of CRLF Sequences ('CRLF Injection') vulnerability in mtrudel bandit allows an unauthenticated remote attacker to smuggle CR, LF, or NUL characters into application-visible request headers via HTTP/2. Bandit.HTTP2.Stream.read_headers/1 validates pseudo-header placement and uniqueness, header-name casing, connection-specific headers, the te value, and content-length, but never checks field values. Because HPACK carries arbitrary octets, a HEADERS block whose field values contain \r, \n, or \0 decodes without error and the values land in conn.req_headers unchanged. The HTTP/1 path already rejects the same octets; HTTP/2 did not. Bandit itself is not a sink for the injected bytes: its own logging uses fixed strings or inspect, and HTTP/2 response headers are HPACK-encoded and separately rejected by Plug's put_resp_header, so response splitting is not reachable through this path. The risk is entirely in how a downstream application consumes header values, such as appending one verbatim to a plain-text log or concatenating it into an upstream request. A related gap bundled in the same fix: only :method, :scheme, and :path were checked for at most one occurrence; a duplicate :authority pseudo-header was accepted, with the first instance silently winning as conn.host while a conflicting value remained visible to the application. This issue affects bandit: from 1.4.0 before 1.12.5.
CVE-2026-47080 1 Joshnuss 1 Xml Builder 2026-11-19 N/A
XML Injection vulnerability in joshnuss xml_builder (XmlBuilder module) allows Content Spoofing, XML Injection. This vulnerability is associated with program files lib/xml_builder.ex and program routines XmlBuilder.generate/1, XmlBuilder.generate/2, XmlBuilder.escape/1. The escape/1 clause for {:cdata, data} in lib/xml_builder.ex concatenates data verbatim between the CDATA opener <![CDATA[ and closer ]]> without rewriting or splitting on the embedded ]]> sequence. Because CDATA sections have no internal escape mechanism, the only safe way to embed arbitrary bytes is to split on ]]> and emit adjacent CDATA sections. An attacker who can supply input containing ]]> closes the CDATA section early; any bytes that follow are parsed as ordinary XML markup by downstream consumers, allowing injection of arbitrary elements, text, or entity references into the output document. This issue affects xml_builder: from 0.0.7 before 2.4.1.
CVE-2026-48590 1 Joshnuss 1 Xml Builder 2026-11-19 N/A
XML Injection vulnerability in joshnuss xml_builder (XmlBuilder module) allows Content Spoofing, XML Injection. This vulnerability is associated with program files lib/xml_builder.ex and program routines XmlBuilder.generate/1, XmlBuilder.generate/2, XmlBuilder.element/1, XmlBuilder.element/2, XmlBuilder.element/3. Element names, attribute names, and doctype identifiers are interpolated verbatim into the serialized XML output without validation or escaping of structural characters (<, >, ", ', &). An attacker who can influence a name argument (for example, an element name derived from a JSON object key or an HTTP form field name) can inject arbitrary XML markup including extra elements, comments, and event-handler attributes into the output document. This issue affects xml_builder: from 0.0.1 before 2.4.1.
CVE-2026-47079 1 Joshnuss 1 Xml Builder 2026-11-19 N/A
Inappropriate Encoding for Output Context vulnerability in joshnuss xml_builder (XmlBuilder module) allows Content Spoofing, Cross-site Scripting. This vulnerability is associated with program files lib/xml_builder.ex and program routines XmlBuilder.generate/1, XmlBuilder.generate/2, XmlBuilder.escape_string/1, XmlBuilder.escape_entity/1. XmlBuilder.generate/1 does not escape literal & characters in text or attribute values when they are followed by an entity-like token (lt;, gt;, amp;, quot;, apos;). As a result, attacker-supplied input such as &lt;script&gt; is emitted verbatim into the serialized XML rather than being escaped to &amp;lt;script&amp;gt;. When a downstream XML parser later reads the document, it decodes the entity sequences into the literal characters <script>, promoting inert-looking text into real markup. This allows an attacker to bypass upstream filters that block raw < and > characters, injecting markup into any downstream consumer that parses the produced XML and renders the text content in a markup-sensitive context (HTML, SVG, RSS/Atom feeds). Both element text and attribute values are affected. This issue affects xml_builder: from 0.0.6 before 2.4.1.
CVE-2026-75542 1 Hexpm 1 Hexpm 2026-11-19 N/A
Incorrect Authorization vulnerability in the OAuth token endpoint in hexpm hexpm allows an API key holding the repositories permission to read another organization's private packages. When an API key is exchanged for a token through the OAuth client_credentials grant, validate_scopes_against_key/2 in lib/hexpm_web/controllers/api/oauth_controller.ex admits a requested scope whenever the key carries the repositories permission and the scope string begins with repository:. The organization name is never resolved against the principal, and expand_repositories_scope/3 only rewrites the literal repositories scope, so an explicit repository:<name> passes through untouched. Both CDN edges authorize repository access from the token claim without querying the database, so the minted token is read access to that organization's private packages until it expires. This issue affects hex.pm: from 2025-10-18 before 2026-08-24.
CVE-2026-75554 1 Hexpm 1 Hexpm 2026-11-19 N/A
Insufficient Session Expiration vulnerability in the OAuth token refresh grant in hexpm hexpm allows a user removed from an organization to keep reading its private packages. expand_repositories_scope/3 in lib/hexpm/permissions.ex only rewrites the literal repositories scope, so an explicitly granted repository:<org> or docs:<org> scope passes through it untouched. The refresh grant re-derives a new token from the stored granted_scopes, which holds that expanded form, so every refresh reproduces the organization scope without revisiting membership. Because both CDN edges authorize repository access from the token claim without querying the database, an account removed from an organization retains read access for as long as it keeps refreshing, bounded by the 30 day refresh token lifetime rather than the 30 minute access token lifetime. This issue affects hex.pm: from 2025-10-10 before 2026-08-24.
CVE-2026-66882 1 Team-alembic 1 Ash Authentication 2026-11-19 N/A
Improper Neutralization of Input During Web Page Generation (XSS) vulnerability in team-alembic AshAuthentication allows reflected cross-site scripting via the confirmation and magic link interaction forms. When a strategy is configured with require_interaction? set to true, AshAuthentication serves an intermediate HTML page asking the user to confirm the action by submitting a form. Both such pages embed a request parameter directly into a hidden input's value attribute without HTML escaping: lib/ash_authentication/add_ons/confirmation/confirmation_form.html.eex interpolates the confirm parameter, and lib/ash_authentication/strategies/magic_link/sign_in_form.html.eex interpolates the magic link token parameter. These templates are compiled with EEx.function_from_file/3 using plain <%= %> expressions, which perform no escaping, so the parameter is reflected verbatim. Neither accept handler validates the value before rendering it. AshAuthentication.AddOn.Confirmation.Plug.accept/2 only checks that a confirm key is present, and AshAuthentication.Strategy.MagicLink.Plug.accept/2 reads the parameter directly, so no token signature is verified at this stage and arbitrary attacker-supplied text reaches the template. An unauthenticated attacker can therefore craft a URL whose parameter terminates the attribute and injects markup, for example a quote followed by a <script> element. Because the accept phase is served over GET, loading the crafted link is sufficient; no form submission or prior authentication is required. The injected script executes in the origin of the application embedding AshAuthentication, giving it access to that origin's cookies, session, and same-origin responses. Since these pages are part of the authentication flow, a victim following what appears to be a legitimate confirmation or sign-in link is a plausible target. This issue affects ash_authentication: from 4.8.0 before 4.14.2 and from 5.0.0-rc.0 before 5.0.0-rc.13.
CVE-2026-65633 1 Team-alembic 1 Ash Authentication 2026-11-19 N/A
Improper Authentication vulnerability in team-alembic AshAuthentication allows purpose-limited JWTs to be replayed as full bearer API credentials when a resource uses stateless bearer-token verification. The bearer-token authentication helper AshAuthentication.Plug.Helpers.retrieve_from_bearer/3 verifies an Authorization: Bearer JWT's signature and rejects tokens containing an act claim, but performs no check that the token's purpose claim equals user at the bearer boundary. When the resource is configured with require_token_presence_for_authentication?: false (the DSL default), the follow-on validate_token/3 helper returns {:ok, nil} without consulting the token resource, so no downstream check on purpose takes place either. As a result, any valid, non-expired JWT the library itself issued for a narrow, single-purpose flow (most notably the purpose: sign_in token that WebAuthn always emits during sign-in, and that the Password strategy emits when sign-in tokens are enabled) is accepted directly as a general-purpose bearer credential and resolves to a full current_user assignment. This bypasses the library's intended token-exchange contract, in which the sign_in token is meant to be presented exactly once to a preparation that validates the purpose claim and immediately revokes the token. The first use of a still-valid sign-in token presented directly in the Authorization header succeeds because the stateless bearer path never scopes it to purpose == "user". An attacker who obtains a not-yet-exchanged sign-in token for a target subject (for example via log or referrer leakage, an intercepted magic-link delivery channel, or a partially compromised intermediary) can present it as a bearer token and be authenticated as that subject, fully bypassing the intended one-time-use and revocation semantics. Exploitation additionally requires that the host application wire up retrieve_from_bearer/3 on a reachable route and uses either WebAuthn (sign-in tokens are always issued) or the Password strategy with sign_in_tokens_enabled?: true. Resources configured with require_token_presence_for_authentication?: true (including applications scaffolded by the Igniter installer since v4.5.0) and the session-based path (authenticate_resource_from_session/4) enforce purpose == "user" against the stored token record and are not affected. This issue affects ash_authentication: from 3.10.5 before 4.14.2 and from 5.0.0-rc.0 before 5.0.0-rc.13.
CVE-2026-59250 1 Erlang 2 Erlang/otp, Erlang\/otp 2026-11-19 N/A
Classic buffer overflow in the Erlang/OTP megaco flex scanner C driver allows a remote unauthenticated attacker to corrupt the driver's memory (and potentially achieve remote code execution or a denial-of-service crash) by sending a single text-encoded H.248/Megaco message containing an oversized property parm name. When tokenizing a Local/Remote descriptor, mfs_load_property_groups extracts the attacker-controlled property name (bounded only by the message length) and, when no value follows, formats it into a fixed 512-byte error_msg field of the MfsErlDrvData struct using an unchecked sprintf call. Names longer than roughly 452 bytes overflow into the immediately following struct fields (text_buf, text_ptr, term_spec, term_spec_size, term_spec_index), overwriting live pointers and counters with attacker-chosen bytes. Subsequent scanner code writes and frees through the corrupted pointers, producing arbitrary write and arbitrary free primitives inside the BEAM VM process, which can be leveraged for remote code execution. On builds compiled with _FORTIFY_SOURCE the overflow is detected at runtime and terminates the process with SIGABRT, resulting in denial of service. The overflow occurs in the flex scanner before any grammar or Megaco-level authentication processing, so exploitation requires only network reachability to the megaco transport port on a node configured with {scanner, flex}. This vulnerability is associated with program files lib/megaco/src/flex/megaco_flex_scanner_drv.flex.src and program routines mfs_load_property_groups. This issue affects OTP from OTP 17.0 before OTP 27.3.4.15, OTP 28.5.0.4, and OTP 29.0.4, corresponding to megaco from 3.17.1 before 4.7.2.2, 4.8.3.1, and 4.9.1. Whether OTP before OTP 17.0, corresponding to megaco before 3.17.1, is affected is unknown.
CVE-2026-66353 1 Woylie 1 Doggo 2026-11-19 N/A
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in woylie doggo allows Reflected XSS. Doggo.normalize_value/2 in lib/doggo.ex returned date field values wrapped in {:safe, ...}, the Phoenix.HTML marker meaning "already escaped, emit verbatim", without escaping them, so the value reached the value attribute of the <input> rendered by the field component unchanged. Any application rendering <.field type="date"> over user-controlled params is affected through the ordinary Phoenix form round-trip, where a failed validation re-renders the submitted value. The pattern kept exactly the first ten bytes and discarded shorter values, capping a payload at ten bytes: enough to terminate the attribute and open an element or attach a short event handler, not enough to place attacker-chosen script inline. Only type="date" is affected. This issue affects doggo: from 0.1.0 before 0.14.8.
CVE-2026-75758 1 Elixir-lang 1 Elixir 2026-11-19 N/A
Uncontrolled Recursion vulnerability in the Elixir standard library allows an attacker who controls a list passed to inspect/1, List.to_string/1, or List.to_charlist/1 to exhaust a BEAM node's memory. Inspect.List's charlist branch in lib/elixir/lib/inspect.ex classifies a list as a charlist using List.ascii_printable?/2, which examines only the first :printable_limit (4096 by default) elements, and then calls IO.chardata_to_string/1 on the whole term. A list whose printable prefix exceeds that limit but which contains a later element that is not a code point (an atom, an out-of-range integer, or an improper tail) is therefore mis-classified, and the conversion raises ArgumentError. That conversion runs inside List.to_string/1, whose rescue clause builds its message by interpolating inspect(list), which re-enters the same branch and raises again. The nested inspection is an argument to raise, so the recursion is not in tail position and every level is retained: the process stack grows monotonically while each cycle re-walks the list, until the process is killed by max_heap_size or, by default, the node runs out of memory. List.to_charlist/1 has the same rescue shape. Below the printable limit the inner inspect/1 sees the invalid element within its counter and renders the list in ordinary bracket form, so a single ArgumentError is raised and no recursion occurs. This issue affects elixir: from 1.15.0-rc.0 before 1.18.5, from 1.19.0-rc.0 before 1.19.6, and from 1.20.0-rc.0 before 1.20.4.
CVE-2026-75847 1 Ash-project 1 Ash Paper Trail 2026-11-19 N/A
Cleartext Storage of Sensitive Information vulnerability in ash-project ash_paper_trail allows an attacker with read access to the generated version resource to recover the plaintext of sensitive? attributes. AshPaperTrail stores the values of tracked sensitive? attributes in the generated version resource's changes map, which is declared public? true and sensitive? false, so the values are returned by the version resource's default read action and printed in logs, inspect output, and error messages instead of being redacted. AshPaperTrail.Resource.Transformers.CreateVersionResource derives the changes map's sensitivity from the ignore_attributes list (the attributes excluded from changes) rather than from the tracked attributes actually stored in it, and ignore_attributes defaults to empty, so the flag is effectively always false. This issue affects ash_paper_trail: from 0.1.1 before 0.7.0.
CVE-2026-77970 1 Ash-project 1 Ash Paper Trail 2026-11-19 N/A
Cleartext Storage of Sensitive Information vulnerability in ash-project ash_paper_trail allows an attacker with read access to the generated version resource to recover sensitive values nested inside embedded resources, unions, or lists. sensitive_attributes :redact and :ignore only act on the tracked resource's top-level attributes. maybe_redact_changes/3 and the stored-action-input path in AshPaperTrail.Resource.Changes.CreateNewVersion derive the sensitive set from the resource's own attributes and never descend into embedded, union, or list values, so a non-sensitive attribute or action argument that holds an embed with a sensitive? field (for example an accepted credentials embed carrying a token) is written to the version table in cleartext. This issue affects ash_paper_trail: from 0.3.0 before 0.7.0.
CVE-2026-77831 1 Ash-project 1 Ash Paper Trail 2026-11-19 N/A
Inefficient Algorithmic Complexity vulnerability in ash-project ash_paper_trail allows a user who can submit a large array attribute to a paper-trailed create or update action to cause a denial of service through excessive CPU and memory use. With full-diff change tracking, AshPaperTrail.ChangeBuilders.FullDiff.ListChange pairs each prior array element against the new list by rebuilding the remaining-elements accumulator with acc ++ [tuple] on every step, copying the growing list each time, so the pairing scales cubically in the array length. Nothing bounds the length and the value comes straight from action input, so one request carrying a large accepted {:array, _} attribute forces tens of seconds of CPU and multi-gigabyte allocations. This issue affects ash_paper_trail: from 0.1.1 before 0.7.0.
CVE-2026-75759 1 Erlef 2 Oidcc, Oidcc Plug 2026-11-19 N/A
Improper Verification of Cryptographic Signature vulnerability in erlef oidcc allows an unauthenticated attacker to impersonate an arbitrary user via an encrypted ID token or JARM response carrying no nested signature. OpenID Connect Core 1.0 section 2 requires that an encrypted ID token be signed then encrypted, with the result being a Nested JWT, and JARM processing rule 5 requires the client to check the signature unconditionally. oidcc instead accepted a JWE wrapping unsigned claims as fully validated, so anyone holding the relying party's public encryption key could mint a token with an arbitrary sub, iss, and aud without possessing the provider's signing key. In oidcc_jwt_util:verify_decrypted_token/4, a decrypted payload that is not a signed JWS fell back to parsing the plaintext claims and returning them with no verifying key. oidcc_token:int_validate_jwt/4 then matched on the JOSE structure type rather than on whether a signature had been verified, and returned success. The JARM path in oidcc_token:validate_jarm/3 is reachable through the browser front channel. UserInfo responses are not affected, because OpenID Connect Core 1.0 section 5.3.2 permits them to be encrypted without also being signed. This issue affects oidcc: from 3.2.0-beta.1 before 3.9.0.
CVE-2026-77846 1 Ash-project 1 Ash Sqlite 2026-11-19 N/A
Improper Neutralization of Special Elements in Data Query Logic vulnerability in ash-project ash_sqlite allows an attacker who controls a get_path/2 segment to traverse into nested JSON the application never exposed, disclosing private or sensitive? embedded fields. AshSqlite.SqlImplementation builds the SQLite json_extract path with "$." <> Enum.join(right, "."), so a single segment containing ., [, ], or $ re-interprets the JSON path (for example "private.secret" descends two levels instead of naming one key). The path is bound as a parameter, so this is confined to the JSON-path grammar rather than SQL. Any endpoint that lets user input reach a get_path segment (a common pick-a-field pattern) can read nested values it never meant to expose. This issue affects ash_sqlite: from 0.1.2-rc.0 before 0.2.18.
CVE-2026-78038 1 Ash-project 1 Ash Oban 2026-11-19 N/A
Improperly Controlled Modification of Dynamically-Determined Object Attributes vulnerability in ash-project ash_oban allows a user whose input reaches the :args option of AshOban.build_trigger/3 to retarget an update or destroy trigger at another record, including across tenants. build_trigger/3 builds the trusted job arguments with atom keys (:primary_key, :tenant, :action_arguments) and merges the caller's :args underneath so the trusted values win on collision. Because Oban job arguments round-trip through JSON, the caller's keys arrive as strings, so Map.merge sees no collision and both keys survive. When the job is persisted the JSON object is de-duplicated keeping the last (string) key, and the worker reads the caller's value. The documentation describes :args as unable to affect the action, so an application that forwards user input into it for uniqueness scoping is exposed to authorization bypass and tenant isolation breaks. This issue affects ash_oban: from 0.2.5 before 0.8.14.
CVE-2026-78228 1 Ash-project 1 Ash Oban 2026-11-19 N/A
Uncontrolled Recursion vulnerability in ash-project ash_oban allows a user who can drive a trigger's on_error action to fail on the final attempt to exhaust worker CPU and memory, denying service. The generated worker's atomic handle_error/4 runs the trigger's on_error action on a job's final attempt inside a rescue that, when the action itself raises, calls handle_error/4 again with the same job. The job's attempt still equals max_attempts, so it re-enters the same clause and re-runs the failing action, with no exit. Any deterministic on_error failure (a data-layer outage, a misconfigured action, or a record the action rejects) loops forever; because the recursive call is not in tail position, each iteration retains a formatted stacktrace and the process heap grows without bound while the failing statement is re-issued against the data layer until the runtime kills the worker. This issue affects ash_oban: from 0.8.0-rc.1 before 0.8.14.