Export limit exceeded: 425471 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 425471 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 425471 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 425471 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (425471 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90834 | 1 Zephyrproject | 1 Zephyr | 2026-11-13 | 5.5 Medium |
| The user-mode syscall verifiers for the 16-bit ("wide data") UART API in drivers/serial/uart_handlers.c validated the wrong driver operation. z_vrfy_uart_poll_out_u16(), z_vrfy_uart_tx_u16() and z_vrfy_uart_rx_enable_u16() each ran K_SYSCALL_DRIVER_UART() against the 8-bit op (poll_out, tx, rx_enable) rather than the 16-bit op that the corresponding implementation dereferences (poll_out_u16, tx_u16, rx_enable_u16). z_impl_uart_poll_out_u16(), z_impl_uart_tx_u16() and z_impl_uart_rx_enable_u16() in include/zephyr/drivers/uart/uart_internal.h call their op unconditionally, with no NULL guard of their own, because the verifier is supposed to have established that the op exists. CONFIG_UART_WIDE_DATA is an application-selectable option that no driver selects, and only a handful of the serial drivers in the tree implement any _u16 operation; every other driver leaves those struct uart_driver_api members NULL while still providing the 8-bit ops the old check inspected. In a build with CONFIG_USERSPACE and CONFIG_UART_WIDE_DATA (plus CONFIG_UART_ASYNC_API for the uart_tx_u16() and uart_rx_enable_u16() variants), an unprivileged user-mode thread that legitimately holds access to such a UART device object can invoke the _u16 syscall: the object, permission and op checks all pass, and the kernel-side implementation then performs an indirect call through a NULL function pointer while running at supervisor privilege. The result is a CPU exception taken in kernel context instead of the intended K_OOPS or -ENOSYS return. With the default k_sys_fatal_error_handler() this halts the system (or warm-reboots it under CONFIG_RESET_ON_FATAL_ERROR), so a thread confined by the userspace sandbox can deny service to the whole device — a capability the user-mode privilege boundary is specifically meant to withhold. The call target is a fixed NULL, so there is no attacker-controlled code execution and no memory disclosure; the separate K_SYSCALL_MEMORY_ARRAY_READ()/K_SYSCALL_MEMORY_ARRAY_WRITE() bounds checks on the caller's buffer were and remain correct. The fix points each verifier at the matching _u16 op, using a plain K_SYSCALL_OBJ() object check where the op does not exist or where the implementation already tests it for NULL. | ||||
| CVE-2026-20183 | 1 Cisco | 1 Identity Services Engine Software | 2026-11-13 | 4.3 Medium |
| A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to modify parts of the configuration on an affected device. This vulnerability is due to the lack of server-side validation of Administrator permissions. An attacker could exploit this vulnerability by submitting a crafted HTTP request to an affected system. A successful exploit could allow the attacker to modify descriptions of files on a specific page. To exploit this vulnerability, an attacker would need valid Administrator credentials. | ||||
| CVE-2026-126188 | 1 Rails | 1 Rails | 2026-11-13 | 3.7 Low |
| Active Storage makes it simple to upload and reference files in cloud services and attach those files to Active Record objects. Prior to 8.0.5.2 and from 8.1 until 8.1.4.1, Active Storage's ActiveStorage::Previewer::VideoPreviewer, ActiveStorage::Analyzer::VideoAnalyzer, and ActiveStorage::Analyzer::AudioAnalyzer pass uploaded blob contents to FFmpeg without restricting the demuxer. A direct upload can retain a client-declared video/* or audio/* content type for an HLS playlist. FFmpeg content probing selects the hls demuxer, which opens attacker-named file:// segments when the blob is previewed or analyzed. Applications that accept untrusted uploads and generate video previews or analyze video or audio attachments can disclose a local media file readable by the application process when the attacker knows its path. This issue is fixed in versions 8.0.5.2 and 8.1.4.1. | ||||
| CVE-2026-126495 | 1 Emqx | 1 Mqttx | 2026-11-13 | 6.1 Medium |
| MQTTX desktop through 1.13.3 contains a stored cross-site scripting vulnerability that allows attackers to inject script by publishing malicious MQTT topic names or payloads rendered unescaped in tooltips. Attackers controlling a broker or publishing to subscribed topics can execute script in the Electron renderer, which has nodeIntegration enabled, when victims hover Topic Tree or JSON tree nodes. | ||||
| CVE-2026-109903 | 1 X.org | 2 Xorg-x11-server, Xwayland | 2026-11-13 | 7.8 High |
| A buffer overread caused by casting a negative integer to CARD32 in XvQueryImageAttributes in X.Org X Server before 21.1.26 and xwayland before 24.1.15 could be used to causes crashes by authenticated X clients. | ||||
| CVE-2026-125777 | 2 Cozmoslabs, Wordpress-extensions | 2 Profile Builder, Profile Builder | 2026-11-13 | 5.3 Medium |
| Insertion of Sensitive Information Into Sent Data vulnerability in Cozmoslabs Profile Builder profile-builder allows Retrieve Embedded Sensitive Data.This issue affects Profile Builder: from n/a through 4.0.6. | ||||
| CVE-2026-89326 | 1 Apache | 1 Xml Graphics Batik | 2026-11-13 | N/A |
| Origin Validation Error vulnerability in Apache XML Graphics Batik: the external resource same-origin check does not compare the URL protocol This issue affects Apache XML Graphics Batik: through 1.19. Users are recommended to upgrade to version 1.20, which fixes the issue. | ||||
| CVE-2026-121527 | 1 Fortinet | 1 Forticlientems | 2026-11-13 | 6.3 Medium |
| A execution with unnecessary privileges vulnerability in Fortinet FortiClientEMS 7.4.3 through 7.4.7, FortiClientEMS 7.4.0 through 7.4.1, FortiClientEMS 7.2 all versions may allow an authenticated local attacker with admin privileges to gain root shell access via CLI commands. | ||||
| CVE-2026-64671 | 1 Waline | 1 Waline | 2026-11-13 | 7.2 High |
| Waline is a comment system with backend support. In versions 3.15.2 and prior, the @waline/client UserList widget builds its DOM by concatenating server-returned commenter fields directly into root.innerHTML with no HTML escaping. The commenter nick and link are stored and returned verbatim by the server (only the comment body is sanitized), and the link field is never sent to the spam filter. So an unauthenticated visitor who posts a comment with link = x"><img src=x onerror=...> achieves stored cross-site scripting that executes, with no interaction, in the browser of every visitor to a page that embeds the UserList widget. At time of publication, there are no publicly available patches. | ||||
| CVE-2026-64670 | 1 Waline | 1 Waline | 2026-11-13 | 9.3 Critical |
| Waline is a comment system with backend support. In versions 3.15.2 and prior, @waline/client renders the comment editor's live preview with marked and no sanitizer (utils/markdown.ts), and the preview is injected with v-html. When a comment is edited, the editor is seeded with the comment's raw, un-sanitized body (orig). Only administrators and the comment owner can edit. So an administrator who clicks Edit on an attacker's comment renders that attacker's raw HTML in their own session: an unauthenticated commenter achieves privilege-escalation stored XSS against a moderator with a single Edit click. At time of publication, there are no publicly available patches. | ||||
| CVE-2026-64668 | 1 Mcdope | 1 Pam Usb | 2026-11-13 | 7.4 High |
| pam_usb provides hardware authentication for Linux using removable media. From version 0.8.0 to before version 0.9.3, the deny_remote feature in pam_usb uses /usr/bin/w -i to detect whether the authenticating user has an active remote tmux session. In pusb_tmux_has_remote_clients() (src/tmux.c), the IPv6 detection pattern matched the address group and then immediately expected whitespace. On Linux systems with multi-homed network interfaces, w -i appends a zone index (scope identifier) to link-local IPv6 addresses — e.g. fe80::1%eth0. The %eth0 suffix appeared between the address and the next whitespace field, causing the regex match to fail even for an otherwise-matching remote session. The function returned "no remote clients" and granted access. This issue has been patched in version 0.9.3. | ||||
| CVE-2026-64666 | 1 Mcdope | 1 Pam Usb | 2026-11-13 | 7.1 High |
| pam_usb provides hardware authentication for Linux using removable media. Prior to version 0.9.3, src/local.c reads XRDP_SESSION with plain getenv(3) at the head of pusb_local_login while every other env consumer in the same function uses secure_getenv(3). When pam_usb.so loads into a setuid PAM host, the calling user controls the environment passed in. Clearing XRDP_SESSION before invoking the host bypasses the explicit XRDP-deny rule. Other remote-detection signals (rmsvc, evdev, loginctl, utmp) may still catch the session, but the env-based detection alone is defeated. This issue has been patched in version 0.9.3. | ||||
| CVE-2026-64667 | 1 Mcdope | 1 Pam Usb | 2026-11-13 | 4.4 Medium |
| pam_usb provides hardware authentication for Linux using removable media. Prior to version 0.9.3, src/local.c (pusb_get_tty_from_display_server) allocates a 4096-byte cmdline buffer, reads up to 4096 bytes from /proc//cmdline, then replaces every NUL separator with a space. When read(2) returns exactly 4096 bytes for any process the function inspects, the buffer ends without a terminator and the subsequent strstr() calls scan past the allocation boundary. The function is invoked during normal PAM authentication when DISPLAY is set, so the read fires for every process at auth time. Consequences are bounded: strstr output is a Boolean substring match (limited info-disclosure surface) but a hostile heap layout can produce a SIGSEGV that terminates the host PAM process. This issue has been patched in version 0.9.3. | ||||
| CVE-2026-64669 | 1 Mcdope | 1 Pam Usb | 2026-11-13 | 7.4 High |
| pam_usb provides hardware authentication for Linux using removable media. From version 0.8.0 to before version 0.9.3, the deny_remote feature in pam_usb uses /usr/bin/w -i to detect whether the authenticating user has an active remote tmux session. In pusb_tmux_has_remote_clients() (src/tmux.c), the IPv6 detection regex required exactly four explicit colon-separated groups of 1-4 hex digits (e.g. 2001:0db8:85a3:0000). Any IPv6 address in compressed notation — including loopback (::1), link-local (fe80::1), and global unicast addresses (2001:db8::1) — did not match this pattern. As a result the remote-client check silently returned "no remote clients" even when a remote tmux client was connected from such an address. This issue has been patched in version 0.9.3. | ||||
| CVE-2026-61810 | 1 Dmtf | 1 Libspdm | 2026-11-13 | N/A |
| libspdm is a sample implementation that follows the DMTF SPDM specifications. In version 1.4.0, both the FINISH request (Table 80) and the FINISH_RSP response (Table 81) gained two new fields, OpaqueDataLength and OpaqueData, placed before the trailing signed/authenticated field. The transcript definitions used to compute and verify the FINISH signature, the FINISH HMAC (RequesterVerifyData), and the FINISH_RSP HMAC (ResponderVerifyData) were not updated and still terminate with a step of the form. Per DSP0274, the "SPDM Header Fields" are only the four header bytes (SPDMVersion, RequestResponseCode, Param1, Param2). A literal reading therefore excludes OpaqueDataLength and OpaqueData, even though those fields are transmitted before the trailing signature/HMAC field. Because the signature/HMAC must cover every field transmitted before it to "protect the entire handshake against manipulation by an active attacker," an active attacker could otherwise modify the opaque data in flight without invalidating the signature or HMAC. This issue has been patched in version 1.4.1. | ||||
| CVE-2026-88813 | 1 Wordpress-extensions | 1 Yith Woocommerce Gift Cards | 2026-11-13 | 5.3 Medium |
| The YITH WooCommerce Gift Cards WordPress plugin through 4.39.0 does not reconcile the value of a gift card it issues against the amount actually paid for it, instead crediting the new card with the item's pre-discount price, which allows customers to apply an ordinary store coupon at checkout and receive a gift card worth more than they paid. | ||||
| CVE-2026-92408 | 1 Wordpress-extensions | 1 Wps Bookings For Woocommerce | 2026-11-13 | 5.3 Medium |
| The WPS Bookings for WooCommerce WordPress plugin before 3.13.1 does not validate a price value taken from user input before using it to set the product price, allowing unauthenticated users to purchase bookable services at a price of their choosing, including zero. | ||||
| CVE-2026-109904 | 1 X.org | 2 Xorg-x11-server, Xwayland | 2026-11-13 | N/A |
| A buffer overread caused by an integer-overflow in Proc/SProcXResQueryClientIds in X.Org xwayland before 24.1.15 and X Server before 21.1.26 could be used by attackers on authenticated X clients to crash the server or leak out information. | ||||
| CVE-2026-125659 | 1 Emudhra | 1 Embridge | 2026-11-13 | N/A |
| This vulnerability exists in the eMudhra emBridge due to missing authorization checks in the FileBrowser API endpoints. These endpoints perform file system enumeration using the LocalSystem account without adequately validating the requesting caller's authorization. An unauthenticated attacker on the same LAN could exploit this vulnerability by sending malicious webpage to the local HTTPS Web API. Successful exploitation of this vulnerability could allow the attacker to enumerate file and directory names and obtain information about the directory structure of the targeted system. The vulnerability however, does not provide access to file contents or permit file modification, deletion, or code execution, or access to cryptographic keys and hardware token PINs. | ||||
| CVE-2026-121529 | 1 Fortinet | 3 Forticlientmac, Forticlientwindows, Forticlientwindowspam | 2026-11-13 | 9.1 Critical |
| A origin validation error vulnerability in Fortinet FortiClientMac 7.4.0 through 7.4.7, FortiClientWindows 7.4.0 through 7.4.7, FortiClientWindows 7.2.0 through 7.2.14, FortiClientWindowsPAM 7.4.7, FortiClientWindowsPAM 7.2.14 may allow an unauthorized remote attacker to execute unauthorized code or commands. Successful exploitation requires interaction with the victim. | ||||