Export limit exceeded: 52403 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Export limit exceeded: 430052 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (430052 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-99638 1 Linux 2 Linux, Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: net/sched: clamp skb->queue_mapping before indexing the tx queue This issue was caught by Sashiko (nipa). A producer-side path cap is already merged (ea4d4b5dddb5); this patch adds the matching consumer-side caps. The issue: The tx queue is picked and capped in netdev_core_pick_tx() before the __dev_xmit_skb() qdisc enqueue path. A tc BPF program running inside an egress qdisc (not clsact) can then change __sk_buff->queue_mapping; that store is never re-checked. bpf_convert_ctx_access() bounds it only by NO_QUEUE_MAPPING, not by the device's queue count. Two consumers read the stale value: - On dequeue, qdisc_restart() calls netdev_get_tx_queue(), which indexes dev->_tx[]. netdev_get_tx_queue() guards it with just a DEBUG_NET_WARN_ON_ONCE, so sch_direct_xmit() takes the out-of-bounds txq->_xmit_lock and writes txq->xmit_lock_owner past the end of the allocation on non-lltx devices such as ifb. Drivers that index their rings from skb_get_queue_mapping() (ex: ifb) go out of range the same way. - On enqueue, taprio_enqueue() indexes q->qdiscs[] with the same value; the array is sized dev->num_tx_queues. A duplicating netem on a child qdisc clones the skb and re-enqueues the clone at the taprio root (qdisc_root_bh()) through a direct rootq->enqueue() call, so the value reaches taprio_enqueue() before any dequeue cap runs. The Fix: Cap the mapping at the consumers and write the capped value back, so the qdisc's _tx[] lookup, the taprio q->qdiscs[] lookup and any later driver read stay in range. On the dequeue side the cap folds into the dequeue path instead of a separate walk over the returned list: dequeue_skb() caps the head, and each bulk helper caps the element it appends. For a qdisc that is not TCQ_F_ONETXQUEUE, netdev_cap_txqueue() logs a ratelimited notice and selects queue 0. A TCQ_F_ONETXQUEUE qdisc is bound to a single tx queue: dequeue_skb() uses q->dev_queue for the frozen check, the BQL limit and the trace point, while qdisc_restart() transmits on the skb's queue. Capping an out-of-range mapping to queue 0 would therefore send a per-queue child's skb through a different queue than the one it was dequeued for. On mq, mqprio, taprio and htb offload children, a stopped queue 0 could then park the list in q->gso_skb, and the later wake would schedule queue 0's own child instead of this qdisc. Pin a TCQ_F_ONETXQUEUE mapping to the qdisc's own queue to keep the documented invariant. The pin covers every mapping, not only an out-of-range one: an in-range mapping that a filter sets on one of those per-queue children is rewritten to the child's own queue, and this path does not call netdev_cap_txqueue(), so it logs no notice. On a single-queue device qdisc_create() sets TCQ_F_ONETXQUEUE, so the one-queue trigger described below also takes this branch and is corrected without a notice. That also keeps a bulk list on one queue by construction: every element of a TCQ_F_ONETXQUEUE qdisc, including a follower changed by a filter, is pinned to q->dev_queue before it is appended. The fast bulk helper therefore needs no head comparison and no skb_bad_txq requeue; the slow helper, used only by non-ONETXQUEUE qdiscs, still compares and requeues a mismatched follower, where a wake on any queue reschedules q. On the enqueue side taprio_enqueue() caps the mapping against real_num_tx_queues and writes it back before selecting q->qdiscs[queue], so a duplicating child cannot steer the clone out of the array. Conditions to recreate the bug: The dequeue path: load a SCHED_CLS or SCHED_ACT program that stores __sk_buff->queue_mapping (a tc BPF action is enough), attach it to a transmit qdisc (for example a matchall filter on a prio root), and send a packet. With a 1-queue device a store of 1 indexes one past dev->_tx[]. Under KASAN with panic_on_warn=1 the unfixed kernel faults with "BUG: KASAN: slab-out- ---truncated---
CVE-2026-131785 2026-11-20 5.3 Medium
Missing Authorization vulnerability in PublishPress PublishPress Permissions press-permit-core allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects PublishPress Permissions: from n/a through 5.0.1.
CVE-2026-95690 1 Openssl 1 Openssl 2026-11-20 5.3 Medium
Issue summary: Receiving crafted out-of-sequence DTLS handshake fragments may cause OpenSSL to allocate a full message-length reassembly buffer for each buffered message, so a small amount of wire data consumes a large amount of memory. Impact summary: A remote attacker can send a few small crafted DTLS handshake fragments to make a DTLS server or client allocate well over a megabyte of memory per connection, which may lead to memory exhaustion and Denial of Service if many connections are made. CWE: CWE-770: Allocation of Resources Without Limits or Throttling Description: DTLS handshake messages can arrive out of order and fragmented, so OpenSSL buffers fragments of up to ten out-of-sequence messages until reassembly is possible. When the first fragment of a new message arrives, OpenSSL allocates a buffer sized to the full message length declared in the fragment header, plus a reassembly bitmap, instead of storing only the bytes actually received. The declared length is capped by the maximum certificate list size, 128KB by default, and that cap applies to every handshake message type rather than only to Certificate messages. Only DTLS endpoints reach this code. TLS, QUIC and applications that do not use DTLS are unaffected. An attacker sends fragments that declare a large message length but carry almost no data, using up to ten distinct message sequence numbers. A single connection can then hold roughly 1.4MB of buffers from about 156 bytes on the wire. Because the number of buffered messages is capped, memory exhaustion requires many connections or many peers, which is why the severity is Low. FIPS impact: no The affected code is outside the FIPS module boundary.
CVE-2026-84786 1 Openssl 1 Openssl 2026-11-20 7.5 High
Issue summary: A DANE-enabled TLS client may crash by dereferencing a NULL pointer when processing an unusual combination of certificate and TLSA records. Impact summary: The impact is limited to a client crash (potential Denial of Service). CWE: CWE-476: NULL Pointer Dereference Description: A DANE-enabled TLS client that supports TLSA records with at least one of the PKIX-TA(0) or PKIX-EE(1) usages alongside the DANE-TA(2) usage may crash by dereferencing a NULL pointer if the server claims a trusted CA's certificate to be its end-entity certificate and has an unusual mix of associated TLSA records. DANE SMTP clients should not be affected since only the DANE-TA(2) and DANE-EE(3) TLSA record usages are specified applicable in SMTP. For example, the Postfix MTA is not affected, while the Exim MTA does not at present use OpenSSL's DANE implementation. Use of DANE in validation of RFC7250 raw public keys (RPKs) is also unaffected, as these only use DANE-EE(3) TLSA records. Only applications that support combining the DANE PKI with a traditional PKI are potentially affected. A DANE-enabled browser or similar, that uses OpenSSL's DANE API could be affected. FIPS impact: no The DANE API is outside the FIPS module boundary.
CVE-2026-131781 2026-11-20 6.5 Medium
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Brainstorm Force Spectra ultimate-addons-for-gutenberg allows Stored XSS.This issue affects Spectra: from n/a through 2.20.6.
CVE-2026-131228 1 Splunk 1 Enterprise Security 2026-11-20 5.4 Medium
In Splunk Enterprise Security versions below 8.7.0, a user who holds the "ess_user" Splunk Enterprise Security role could run a search that causes attacker-controlled Search Processing Language (SPL) text to appear in the Search Audit dashboard. If another user who can access the dashboard selects the affected search, Splunk Enterprise Security could run attacker-controlled SPL commands using the permissions of the user who selects the search. The user who runs the first search could then access sensitive data and modify some data available to the user who selects the affected search. The vulnerability is possible because the Search Audit dashboard does not safely escape logged search text before inserting it into drilldown searches. For more information see Users and roles for Splunk Enterprise Security (https://help.splunk.com/en/splunk-enterprise-security-8/install/8.7/installation/users-and-roles-for-splunk-enterprise-security) and Audit dashboards (https://help.splunk.com/en/splunk-enterprise-security-8/user-guide/8.7/analytics/audit-dashboards) in the Splunk documentation.
CVE-2026-131229 1 Splunk 1 Enterprise Security 2026-11-20 5.4 Medium
In Splunk Enterprise Security versions below 8.7.0, a user that holds a role with the run_collect capability could store attacker-controlled values in vulnerability data. If another user who can access the Vulnerability Search dashboard selects an affected row, Splunk Enterprise Security could run attacker-controlled Search Processing Language (SPL) commands using the permissions of the user who selects the row. The user who stores the values could then access sensitive data and modify some data available to the user who selects the row. The vulnerability is possible because the Vulnerability Search dashboard encodes data-model field values for the drilldown link but does not escape the values as SPL search literals before inserting the values into drilldown searches. For more information see Define roles on the Splunk platform with capabilities (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.4/manage-splunk-platform-users-and-roles/define-roles-on-the-splunk-platform-with-capabilities) and Network dashboards (https://help.splunk.com/en/splunk-enterprise-security-8/user-guide/8.7/analytics/network-dashboards) in the Splunk documentation.
CVE-2026-131230 1 Splunk 1 Enterprise Security 2026-11-20 5 Medium
In Splunk Enterprise Security versions below 8.7.0, an unauthenticated user could trick a user that holds a role with the ueba_can_view_ui capability into opening a link that the unauthenticated user creates for the User and Entity Behavior Analytics (UEBA) Overview dashboard. When the user opens the link, Splunk Enterprise Security could run attacker-controlled Search Processing Language (SPL) commands using the permissions of the user who opens the link. The commands could expose or modify some data available to the user who opens the link and partially disrupt search processing. The vulnerability is possible because the User and Entity Behavior Analytics Overview dashboard does not escape dashboard filter values from the link before substituting the values into SPL searches. The vulnerability requires the attacker to phish the user by tricking them into opening a link that the attacker creates. The unauthenticated user should not be able to exploit the vulnerability at will. For more information see UEBA dashboards (https://help.splunk.com/en/splunk-enterprise-security-8/user-guide/8.8/analytics/ueba-dashboards) in the Splunk documentation.
CVE-2026-131231 1 Splunk 1 Enterprise Security 2026-11-20 5.4 Medium
In Splunk Enterprise Security versions below 8.7.0, a user that holds a role with the run_collect capability could store attacker-controlled values in managed-lookup audit data. If another user who can access the Managed Lookups Audit dashboard selects an affected row, Splunk Enterprise Security could run attacker-controlled Search Processing Language (SPL) commands using the permissions of the user who selects the row. The user who stores the values could then access sensitive data and modify some data available to the user who selects the row. The vulnerability is possible because the Managed Lookups Audit dashboard does not safely escape audit data before inserting it into drilldown searches. For more information see Define roles on the Splunk platform with capabilities (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.4/manage-splunk-platform-users-and-roles/define-roles-on-the-splunk-platform-with-capabilities) and Audit dashboards (https://help.splunk.com/en/splunk-enterprise-security-8/user-guide/8.7/analytics/audit-dashboards) in the Splunk documentation.
CVE-2026-131232 1 Splunk 1 Enterprise Security 2026-11-20 6.4 Medium
In Splunk Enterprise Security versions below 8.7.0, a user that holds a role with the run_collect capability could store attacker-controlled values in vulnerability scan data. If another user who can access the Vulnerability Scan Details dashboard selects an affected value, Splunk Enterprise Security could run attacker-controlled Search Processing Language (SPL) commands using the permissions of the user who selects the value. The user who stores the values could then access sensitive data and modify data available to the user who selects the affected value. The vulnerability is possible because the Vulnerability Scan Details dashboard does not validate destination values before inserting them into drilldown searches. For more information see Define roles on the Splunk platform with capabilities (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.4/manage-splunk-platform-users-and-roles/define-roles-on-the-splunk-platform-with-capabilities) and Vulnerability Scan Details (https://help.splunk.com/en/splunk-enterprise-security-8/splunk-app-for-pci-compliance/installation-and-configuration-manual/8.7/configure-reports/vulnerability-scan-details) in the Splunk documentation.
CVE-2026-131233 1 Splunk 1 Enterprise Security 2026-11-20 5.4 Medium
In Splunk Enterprise Security versions below 8.7.0, a user that holds a role with the run_collect capability could store attacker-controlled values in endpoint summary data. If another user who can access the Time Center dashboard selects an affected row, Splunk Enterprise Security could run attacker-controlled Search Processing Language (SPL) commands using the permissions of the user who selects the row. The user who stores the values could then access sensitive data and modify some data available to the user who selects the row. The vulnerability is possible because the Time Center dashboard does not safely escape endpoint summary values before inserting them into drilldown searches. For more information see Define roles on the Splunk platform with capabilities (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.4/manage-splunk-platform-users-and-roles/define-roles-on-the-splunk-platform-with-capabilities) and Endpoint dashboards (https://help.splunk.com/en/splunk-enterprise-security-8/user-guide/8.7/analytics/endpoint-dashboards) in the Splunk documentation.
CVE-2026-131234 1 Splunk 1 Enterprise Security 2026-11-20 4.2 Medium
In Splunk Enterprise Security versions below 8.7.0, an unauthenticated user could create and deliver an Entity Analysis dashboard link to a Splunk Enterprise Security user. If the Splunk Enterprise Security user opens the link, Splunk Enterprise Security could run attacker-controlled Search Processing Language (SPL) commands using the permissions of the Splunk Enterprise Security user. The commands could expose or modify some data available to the Splunk Enterprise Security user. The vulnerability is possible because the Entity Analysis dashboard inserts entity values from a link that an unauthenticated user creates into SPL searches without safely escaping the values. The vulnerability requires the attacker to phish the affected user by tricking them into initiating a request within their browser. The unauthenticated user should not be able to exploit the vulnerability at will. For more information see Entity analysis dashboard (https://help.splunk.com/en/splunk-enterprise-security-8/user-guide/8.7/exposure-analytics-and-ueba/entity-analysis-dashboard) in the Splunk documentation.
CVE-2026-131235 1 Splunk 1 Enterprise Security 2026-11-20 4.8 Medium
In Splunk Enterprise Security versions below 8.7.0, a user that holds a role with the run_collect capability could store attacker-controlled values in data used by the Credit Card Data Found dashboard. If another user who can access the dashboard selects an affected row, Splunk Enterprise Security could run attacker-controlled Search Processing Language (SPL) commands using the permissions of the user who selects the row. The user who stores the values could then access sensitive data available to the user who selects the row. The vulnerability is possible because the Credit Card Data Found dashboard does not validate source and destination values before inserting them into drilldown searches. For more information see Define roles on the Splunk platform with capabilities (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.4/manage-splunk-platform-users-and-roles/define-roles-on-the-splunk-platform-with-capabilities) and Credit Card Data Found (https://help.splunk.com/en/splunk-enterprise-security-8/splunk-app-for-pci-compliance/installation-and-configuration-manual/8.7/configure-reports/credit-card-data-found) in the Splunk documentation.
CVE-2026-131236 1 Splunk 1 Enterprise Security 2026-11-20 8.8 High
In Splunk Enterprise Security versions below 8.7.0, an unauthenticated user who can influence indexed event data could store attacker-controlled values in event fields. If another authenticated user who reviews the event selects the View Adaptive Response Invocations or View Adaptive Response Results workflow action from Event Actions, Splunk Enterprise Security could run attacker-controlled Search Processing Language (SPL) commands using the permissions of the user who selects the action. The unauthenticated user could then access or modify sensitive data and disrupt services available to the user who selects the action. The vulnerability is possible because the affected Common Information Model workflow actions insert the orig_sid and orig_rid event-field values directly into searches without safely validating or quoting the values. For more information see About workflow actions in Splunk Web (https://help.splunk.com/en/splunk-enterprise/manage-knowledge-objects/knowledge-management-manual/10.2/workflow-actions/about-workflow-actions-in-splunk-web) in the Splunk documentation.
CVE-2026-131237 1 Splunk 1 Enterprise Security 2026-11-20 5.4 Medium
In Splunk Enterprise Security versions below 8.7.0, a user that holds a role with the run_collect capability could store attacker-controlled values in data used by the Weak Encrypted Communication report. If another user who can access the report selects an affected drilldown, Splunk Enterprise Security could run attacker-controlled Search Processing Language (SPL) commands using the permissions of the user who selects the drilldown. The user who stores the values could then access sensitive data and modify some data available to the user who selects the drilldown. The vulnerability is possible because the Weak Encrypted Communication report does not validate source, destination, and Secure Sockets Layer version values before inserting them into drilldown searches. For more information see Define roles on the Splunk platform with capabilities (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.4/manage-splunk-platform-users-and-roles/define-roles-on-the-splunk-platform-with-capabilities) and Weak Encrypted Communication (https://help.splunk.com/en/splunk-enterprise-security-8/splunk-app-for-pci-compliance/installation-and-configuration-manual/8.7/configure-reports/weak-encrypted-communication) in the Splunk documentation.
CVE-2026-131238 1 Splunk 1 Enterprise Security 2026-11-20 6.4 Medium
In Splunk Enterprise Security versions below 8.7.0, a user that holds a role with the run_collect capability could store attacker-controlled certificate values. If another user who can access the Secure Sockets Layer Search dashboard selects an affected row, Splunk Enterprise Security could run attacker-controlled Search Processing Language (SPL) commands using the permissions of the user who selects the row. The user who stores the values could then access sensitive data and modify data available to the user who selects the row. The vulnerability is possible because the Secure Sockets Layer Search dashboard encodes certificate values for the drilldown link but does not escape the values as SPL search literals before inserting the values into drilldown searches. For more information see Define roles on the Splunk platform with capabilities (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.4/manage-splunk-platform-users-and-roles/define-roles-on-the-splunk-platform-with-capabilities) and Protocol intelligence dashboards (https://help.splunk.com/en/splunk-enterprise-security-8/user-guide/8.7/analytics/protocol-intelligence-dashboards) in the Splunk documentation.
CVE-2026-131239 1 Splunk 1 Enterprise Security 2026-11-20 7.3 High
In Splunk Enterprise Security versions below 8.7.0, a user that holds a role with the run_collect capability could store attacker-controlled values in Updates data. If another user who can access the System Update Status report selects an affected row, Splunk Enterprise Security could run attacker-controlled Search Processing Language (SPL) commands using the permissions of the user who selects the row. The user who stores the values could then access sensitive data and modify data available to the user who selects the row. The vulnerability is possible because the System Update Status report does not validate destination, signature, and vendor-product values before inserting them into drilldown searches. For more information see Define roles on the Splunk platform with capabilities (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.4/manage-splunk-platform-users-and-roles/define-roles-on-the-splunk-platform-with-capabilities) and System Update Status (https://help.splunk.com/en/splunk-enterprise-security-8/splunk-app-for-pci-compliance/installation-and-configuration-manual/8.7/configure-reports/system-update-status) in the Splunk documentation.
CVE-2026-131240 1 Splunk 1 Splunk 2026-11-20 3.5 Low
In Splunk SOAR versions below 8.8.0, an authenticated user could cause Splunk SOAR to store excessive data in the Ingestion Status history through the Representational State Transfer (REST) API. When another user with permission to view system settings retrieves the Ingestion Status history, Splunk SOAR could use additional resources and return a larger response, which could degrade the availability of administrative monitoring. The vulnerability is possible because Splunk SOAR does not limit the amount of request data that it records for failed container creation before it stores the data in the Ingestion Status history. For more information see REST Containers (https://help.splunk.com/en/splunk-soar/soar-on-premises/rest-api-reference/6.4.0/container-endpoints/rest-containers), REST Roles and Permissions (https://help.splunk.com/en/splunk-soar/soar-on-premises/rest-api-reference/6.4.0/role-management-endpoints/rest-roles-and-permissions), and View ingested container statistics using Ingestion Status (https://help.splunk.com/en/splunk-soar/soar-on-premises/administer-soar-on-premises/6.4.1/manage-your-splunk-soar-on-premises-system-health-and-performance/view-ingested-container-statistics-using-ingestion-status) in the Splunk documentation.
CVE-2026-131241 1 Splunk 1 Splunk 2026-11-20 4.3 Medium
In Splunk SOAR versions below 8.8.0, a user with edit permission for containers on only a subset of container labels could modify container pins outside the container labels that the role permits. The vulnerability is possible because the Container Pin Representational State Transfer (REST) API does not enforce the container label authorization boundary when handling requests. For more information see Manage roles and permissions in Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/administer-soar-on-premises/6.4.1/manage-your-splunk-soar-on-premises-users-and-accounts/manage-roles-and-permissions-in-splunk-soar-on-premises) in the Splunk documentation.
CVE-2026-131242 1 Splunk 1 Splunk 2026-11-20 6.5 Medium
In Splunk SOAR versions below 8.8.0, a user that holds a role with the containers:view permission could access automation history for containers outside the label or tenant scope assigned to the user. This could expose action parameters, connector result summaries, and other investigation and response activity. The vulnerability is possible because the Splunk SOAR Representational State Transfer (REST) API checks the permission to view containers but does not restrict automation history to containers within the label or tenant scope assigned to the user. For more information see Manage roles and permissions in Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/administer-soar-on-premises/8.7.0/manage-your-splunk-soar-on-premises-users-and-accounts/manage-roles-and-permissions-in-splunk-soar-on-premises) and Configure multiple tenants on your Splunk SOAR (On-premises) instance (https://help.splunk.com/en/splunk-soar/soar-on-premises/administer-soar-on-premises/8.7.0/configure-product-settings-for-your-splunk-soar-on-premises-instance/configure-multiple-tenants-on-your-splunk-soar-on-premises-instance) in the Splunk documentation.