| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| StorageGRID (formerly StorageGRID Webscale) versions 11.3 and higher allow an attacker with product-specific knowledge and the ability to communicate with the Grid Network on certain ports to make unauthorized requests. |
| All versions of StorageGRID (formerly StorageGRID Webscale) in default & common configurations allow an unauthenticated attacker to access a limited set of APIs that are intended for use within the grid. |
| The private keys of eight eMudhra intermediate CA certificates have been compromised. eMudhra revoked the eight affected intermediate certificates on October 18, 2026. While this is not a software vulnerability, CVE-2026-22063 has been assigned to track relevant changes in impacted NetApp products. |
| An OpenSSL TLS server may crash if sent a maliciously crafted renegotiation ClientHello message from a client. If a TLSv1.2 renegotiation ClientHello omits the signature_algorithms extension (where it was present in the initial ClientHello), but includes a signature_algorithms_cert extension then a NULL pointer dereference will result, leading to a crash and a denial of service attack. A server is only vulnerable if it has TLSv1.2 and renegotiation enabled (which is the default configuration). OpenSSL TLS clients are not impacted by this issue. All OpenSSL 1.1.1 versions are affected by this issue. Users of these versions should upgrade to OpenSSL 1.1.1k. OpenSSL 1.0.2 is not impacted by this issue. Fixed in OpenSSL 1.1.1k (Affected 1.1.1-1.1.1j). |
| The X509_V_FLAG_X509_STRICT flag enables additional security checks of the certificates present in a certificate chain. It is not set by default. Starting from OpenSSL version 1.1.1h a check to disallow certificates in the chain that have explicitly encoded elliptic curve parameters was added as an additional strict check. An error in the implementation of this check meant that the result of a previous check to confirm that certificates in the chain are valid CA certificates was overwritten. This effectively bypasses the check that non-CA certificates must not be able to issue other certificates. If a "purpose" has been configured then there is a subsequent opportunity for checks that the certificate is a valid CA. All of the named "purpose" values implemented in libcrypto perform this check. Therefore, where a purpose is set the certificate chain will still be rejected even when the strict flag has been used. A purpose is set by default in libssl client and server certificate verification routines, but it can be overridden or removed by an application. In order to be affected, an application must explicitly set the X509_V_FLAG_X509_STRICT verification flag and either not set a purpose for the certificate verification or, in the case of TLS client or server applications, override the default purpose. OpenSSL versions 1.1.1h and newer are affected by this issue. Users of these versions should upgrade to OpenSSL 1.1.1k. OpenSSL 1.0.2 is not impacted by this issue. Fixed in OpenSSL 1.1.1k (Affected 1.1.1h-1.1.1j). |
| StorageGRID (formerly StorageGRID Webscale) versions 11.5 and higher in a non-standard configuration and scenario are susceptible to a Denial of Service vulnerability. Successful exploit could allow an attacker with some control over the environment to cause a partial Denial of Service. |
| A crafted request uri-path can cause mod_proxy to forward the request to an origin server choosen by the remote user. This issue affects Apache HTTP Server 2.4.48 and earlier. |
| zlib through 1.2.12 has a heap-based buffer over-read or buffer overflow in inflate in inflate.c via a large gzip header extra field. NOTE: only applications that call inflateGetHeader are affected. Some common applications bundle the affected zlib source code but may be unable to call inflateGetHeader (e.g., see the nodejs/node reference). |
| The BN_mod_sqrt() function, which computes a modular square root, contains a bug that can cause it to loop forever for non-prime moduli. Internally this function is used when parsing certificates that contain elliptic curve public keys in compressed form or explicit elliptic curve parameters with a base point encoded in compressed form. It is possible to trigger the infinite loop by crafting a certificate that has invalid explicit curve parameters. Since certificate parsing happens prior to verification of the certificate signature, any process that parses an externally supplied certificate may thus be subject to a denial of service attack. The infinite loop can also be reached when parsing crafted private keys as they can contain explicit elliptic curve parameters. Thus vulnerable situations include: - TLS clients consuming server certificates - TLS servers consuming client certificates - Hosting providers taking certificates or private keys from customers - Certificate authorities parsing certification requests from subscribers - Anything else which parses ASN.1 elliptic curve parameters Also any other applications that use the BN_mod_sqrt() where the attacker can control the parameter values are vulnerable to this DoS issue. In the OpenSSL 1.0.2 version the public key is not parsed during initial parsing of the certificate which makes it slightly harder to trigger the infinite loop. However any operation which requires the public key from the certificate will trigger the infinite loop. In particular the attacker can use a self-signed certificate to trigger the loop during verification of the certificate signature. This issue affects OpenSSL versions 1.0.2, 1.1.1 and 3.0. It was addressed in the releases of 1.1.1n and 3.0.2 on the 15th March 2022. Fixed in OpenSSL 3.0.2 (Affected 3.0.0,3.0.1). Fixed in OpenSSL 1.1.1n (Affected 1.1.1-1.1.1m). Fixed in OpenSSL 1.0.2zd (Affected 1.0.2-1.0.2zc). |
| sshd in OpenSSH before 7.4 allows remote attackers to cause a denial of service (NULL pointer dereference and daemon crash) via an out-of-sequence NEWKEYS message, as demonstrated by Honggfuzz, related to kex.c and packet.c. |
| Unspecified vulnerability in Oracle Java SE 6u113, 7u99, and 8u77; Java SE Embedded 8u77; and JRockit R28.3.9 allows remote attackers to affect confidentiality, integrity, and availability via vectors related to JMX. |
| StorageGRID (formerly StorageGRID Webscale) versions prior to 11.9.0.13 and 12.0.0.6 are susceptible to a Information Disclosure vulnerability. Successful exploit could allow an authenticated attacker with low privileges to run arbitrary metrics queries, revealing metric results that they do not have access to. |
| StorageGRID (formerly StorageGRID Webscale) versions prior to 11.9.0.12 and 12.0.0.4 with Single Sign-on enabled and configured to use Microsoft Entra ID (formerly Azure AD) as an IdP are susceptible to a Server-Side Request Forgery (SSRF) vulnerability. Successful exploit could allow an authenticated attacker with low privileges to delete configuration data or deny access to some resources. |
| In Apache httpd 2.2.x before 2.2.33 and 2.4.x before 2.4.26, use of the ap_get_basic_auth_pw() by third-party modules outside of the authentication phase may lead to authentication requirements being bypassed. |
| ruby-saml provides security assertion markup language (SAML) single sign-on (SSO) for Ruby. An authentication bypass vulnerability was found in ruby-saml prior to versions 1.12.4 and 1.18.0 due to a parser differential. ReXML and Nokogiri parse XML differently, the parsers can generate entirely different document structures from the same XML input. That allows an attacker to be able to execute a Signature Wrapping attack. This issue may lead to authentication bypass. Versions 1.12.4 and 1.18.0 contain a patch for the issue. |
| ruby-saml provides security assertion markup language (SAML) single sign-on (SSO) for Ruby. An authentication bypass vulnerability was found in ruby-saml prior to versions 1.12.4 and 1.18.0 due to a parser differential. ReXML and Nokogiri parse XML differently; the parsers can generate entirely different document structures from the same XML input. That allows an attacker to be able to execute a Signature Wrapping attack. This issue may lead to authentication bypass. Versions 1.12.4 and 1.18.0 fix the issue. |
| StorageGRID (formerly StorageGRID Webscale) versions prior to 11.9 are susceptible to a Denial of Service (DoS) vulnerability. Successful exploit by an authenticated attacker could lead to a service crash. |
| StorageGRID (formerly
StorageGRID Webscale) versions prior to 11.8.0.15 and 11.9.0.8 are
susceptible to a Reflected Cross-Site Scripting vulnerability.
Successful exploit could allow an attacker to view or modify
configuration settings or add or modify user accounts but requires the
attacker to know specific information about the target instance and then
trick a privileged user into clicking a specially crafted link. |
| StorageGRID (formerly
StorageGRID Webscale) versions prior to 11.8.0.15 and 11.9.0.8 without
Single Sign-on enabled are susceptible to a Server-Side Request Forgery
(SSRF) vulnerability. Successful exploit could allow an unauthenticated
attacker to change the password of any Grid Manager or Tenant Manager
non-federated user. |
| StorageGRID (formerly
StorageGRID Webscale) versions prior to 11.8.0.15 and 11.9.0.8 are
susceptible to a Denial of Service vulnerability. Successful exploit
could allow an unauthenticated attacker to cause a Denial of Service on
the Admin node. |
